MD Building Products 68593 Fondo porta in alluminio da 1-3 / 4x36 pollici con guarnizione in alluminio con finitura in laminato / vinile 36quot; x 3,6 pollici; x 1,8quot;

Name: MD Building Products 68593 Fondo porta in alluminio da 1-3 / 4x36 pollici con guarnizione in alluminio con finitura in laminato / vinile 36quot; x 3,6 pollici; x 1,8quot;
Brand: M-D Building Products
SKU: 0043374685930
Price: 73.99 EUR
Availability: InStock

Brand:M-D Building Products

3.4/5

€
73.99

DESCRIZIONE DEL PRODOTTO Fondo porta M-D, a forma di L, 3,6 di larghezza, 36 di lunghezza, 1,8 di spessore, vinile, mill. La perdita di energia attraverso la parte inferiore delle porte può essere ridotta al minimo con l'installazione di una parte inferiore della porta in combinazione con la soglia superiore liscia. Questa combinazione fornisce una tenuta stagna tra la parte inferiore della porta e la parte superiore della soglia. I tappi antigoccia forniscono anche protezione alle vie di ingresso esposte deviando l'acqua dal fondo della porta e dalle soglie. M-D Building Products offre molteplici combinazioni di fondi porta nuovi e sostitutivi e tappi antigoccia che si adattano alla maggior parte delle porte d'ingresso. DAL PRODUTTORE La perdita di energia attraverso la parte inferiore delle porte può essere ridotta al minimo con l'installazione di una parte inferiore della porta in combinazione con la soglia superiore liscia. Questa combinazione fornisce una tenuta stagna tra la parte inferiore della porta e la parte superiore della soglia. I tappi antigoccia forniscono anche protezione alle vie di ingresso esposte deviando l'acqua dal fondo della porta e dalle soglie. M-D Building Products offre molteplici combinazioni di fondi porta nuovi e sostitutivi e tappi antigoccia che si adattano alla maggior parte delle porte d'ingresso.

Quantity

Aggiungi al carrello Compra subito

EAN: 0043374685930

Categories: Strumenti e miglioramento della casa, Hardware, Ferramenta e serrature per porte, Soglie,

Materiale: alluminio. Mill/Finitura in vinile. Inserto alettato in vinile. Fondo porta a forma di L. Migliora l'efficienza energetica della tua casa.

Batteries Included?	‎No
Batteries Required?	‎No
Color	‎Mill/Vinyl
Country of Origin	‎China
Customer Reviews	4.4 4.4 out of 5 stars 1,112 ratings 4.4 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎Hardware;Door, Gate & Window Hardware;screen-door-hardware
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎68593
Item Package Quantity	‎1
Item Weight	‎2.75 pounds
Manufacturer	‎M-D Building Products
Part Number	‎68593
Product Dimensions	‎37.25 x 6.62 x 3.62 inches
Size	‎36" x 3.6" x 1.8"
Style	‎Contemporary

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Emle

Awesome find!

I needed to extend the height of my interior door by two inches. This was the only thing I could find that would work. It’s definitely wider. I think it’s meant for exterior/industrial doors. So be aware of that! I just used a piece of wood to fill in the gap and longer screws to hold it in place.

Scritto da: JBF57

Works great

I bought and used this for an adjustable bottom for a new door I built and installed. Simple installation and the flexible positioning of it made a very good tight seal with the threshold. Definitely recommend this. Will buy again when needed.

Scritto da: nick

Very good at what it does

Used this on a 80" door to fit a 83" hole. Very sturdy and pleased with the product.

Scritto da: Pete Constant

Great Quality

Excellent for doors with big gaps. You can see I really needed the depth. It looks as good as it fits.

Scritto da: Jj Florida

Great Fix to Old Door

This is a great fix to an old door that is broken at the bottom. Our door was so bad that some of the screws would not even want to stay in, therefore, I have to find another solution to hold it in place better in some areas, but so far, it's staying in with the few screws that are staying in. The cutting was not the easiest, as I don't have much strength to cut or perhaps the best of tools, but it was still possible to cut just a little bit to make it fit right. It would be nicer if it was just right for the door, but it was just slightly longer than we needed, therefore it had to be customized. The door is tight so we cannot use the bottom strip, but that's a great addition to metal part, if needed. I'm very pleased with this purchase and highly recommend it if you need to save your door until you can manage to have it replaced. I just need to figure out how to tighten the screws on the outside so that dirt does not accumulate from the top. Maybe, I will glue this on top of it to make sure it stays in place and that no dirt will get in from the top of it. But if your door can hold the screws like it should, you should not have that problem.

Scritto da: Eric Solvesky

Fine, as long as you don't care what it looks like...

I know that these are just cut from extruded aluminum channels, but there was absolutely no attempt to clean it up. It came out of the package unbelievably dirty, and had scratches and gouges all over. It was sealed, so I don't think it was used and returned. It's fine, but our brand new office deserves better.

Scritto da: Firecracker

High quality door bottom

This is a high-quality study door bottom that was easy to install. I had to shorten it for the particular door I put it on.

Scritto da: Amazon Customer

Couldn't Be More Pleased

My steel, garage man door was rusting at the bottom so I purchased this product to extend the door's life. I trimmed the cover down with a hack saw to fit the 32" door, filed the rough edges, slid the gasket onto the bottom, pinched the flanges on each end and slid the aluminum cover onto the door which fit perfectly. The screws grabbed the door tightly and the gasket creates a nice seal over the threshold. The cover's guage and design makes it sturdy. Looks good. I pressed a bead of silicone into the tiny gap between the cover and door and figure I just bought another five years on my door.

Scritto da: phil

Solid unit

This is a perfect product where the application is a door that is worn out or rusted or falling apart at the bottom. The aluminum is strong enough to to secure the door and make replacing the door unnecessary. There is more than enough aluminum so that you can even cut off some of your worn out door if you want. I chose to just "cap" the bottom of my door. Because my door had some swelling, I had to tap the aluminum unit into place, making sure to not damage the bottom slot for the rubber.

Scritto da: Archer Mac

Easy and tight

This is very easy to install without having to remove the door. Properly mounted, it seals the door very well.

Scritto da: Amazon Customer

Came bent….?

Heavy duty and looks like it’ll last, came slightly bent on one side…. The box they shipped it in was oversized and probably was moving around during shipping..

Scritto da: Darren James

Worked great

Bought this for my storm door. The door was wider than 1.75”, but I could bend it open a bit to fit around the bottom of the door. Workers great for filling a large gap at the boot bottom. Heavy duty too, will easily handle Winnipeg snow.

Scritto da: Andrew

Excellent product!

Product was exactly what I needed to securely finish off the bottom of an old door (120 years old) to close off the gap to the threshold. It was very easy to cut to my required length on the table saw and to install. It looks good, is very sturdy, and it works well to eliminate drafts. I would definitely purchase it again.