MD Building Products 43854 1-3/8-Inch by 36-Inch Tappeto scanalato

Brand:M-D Building Products

3.5/5

37.13

La finitura in peltro accentua la maggior parte dei colori dei tappeti. Può essere tagliato alla lunghezza desiderata con un seghetto. I chiodi a vite si adattano saldamente ai fori preforati per una facile installazione. Per l'uso in porte, ingressi di stanze o altri luoghi in cui si incontrano due superfici irregolari del pavimento. L'alluminio resistente resiste alle aree ad alto traffico pedonale della casa.

La finitura in peltro accentua la maggior parte dei colori dei tappeti. Può essere tagliato alla lunghezza desiderata con un seghetto. I chiodi a vite si adattano saldamente ai fori preforati per una facile installazione. Per l'uso in porte, ingressi di stanze o altri luoghi in cui si incontrano due superfici irregolari del pavimento. L'alluminio resistente resiste alle aree ad alto traffico pedonale della casa.
Brand M-D Building Products
Color Pewter
Item Dimensions LxWxH 36 x 1.37 x 0.29 inches
Item Weight 0.3 Pounds
Material Aluminum

3.5

9 Review
5 Star
65
4 Star
21
3 Star
8
2 Star
3
1 Star
4

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Jennifer
Works great
As described. Happy with molding.
Scritto da: Reverend Chris
makes my feet happy
The carpet tacks are poking through in my bathroom entrance. This covers them. Installation of this is iffy. You need a concrete drill bit, a good drill, a hammer & a double shot of vodka. Good luck.
Scritto da: BHAM1229
A little narrower than I pictured, but it was a good choice.
I needed a transition strip to connect some pewter colored slate LVP flooring at two slightly different heights. This filled the bill! Not as shiny as a chrome one, but a little narrower than I had pictured in my head, based on the photo. The description was right and it actually worked better then a wider one. I used screws instead of the provided nails.
Scritto da: MBA
Worked out great
I needed a reducer for hardwood floor to linoleum. I couldn’t find it anywhere so I had to look for an alternative. It was easy to install but I had to trim mine down to 32”. I used a hacksaw however I wouldn’t recommend it, it took a while to cut through Plus you have to be extra careful.
Scritto da: kevin
Great edging
Came with hardware (nails) to attach to floor in pre drilled holes.
Scritto da: sandrine
Exactly what we needed!
We've recently remodeled our small bathroom and needed a new thresholds between the bedrooms hardwood floor and the bath vinyl tiles. They are not flush so it had to be fluted. I went to our local hardware store to see the color (pewter can look really dark online, but it's a really warm light grey, what we wanted). They only had one so I was happy to find it on amazon (and for way less). I bough the 36" ones. They arrived in a great shape and did cut them easily to the right size. it was easy to instal and I used the nails that came with them. I had to pre drill the holes because our laminate floor. We're happy with the result.
Scritto da: Jim R
Perfect For What I Needed
Since I Went Into Concrete I Had To Use Concrete Drill Bit, Plastic Anchors & Screws. And Cut Carpet Properly. Once I Did That It Worked Great Going From Ceramic Tile To Carpet.
Scritto da: michael
Work good, just as pictured
If you want to screw it down you'll need to countersink the small pre drilled holes or use button head and hit your toes on them. I used as carpet hardwood and hardwood to linoleum. I know not the proper transition pieces but they're cheap. Until I found 12' sticks of this same product at home Depot for the price of this one. To be fair, three foot sticks are more expensive than these there, weird right.
Scritto da: JUAN LUIS GONZALEZ CASTAÑEDA
bueno
es bueno pero me hubiese gustado un un centímetro mas grande pero en general me quedo bien.

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart