Wheel Masters 8029 Prolunga per valvola a 45 gradi

Name: Wheel Masters 8029 Prolunga per valvola a 45 gradi
Brand: WheelMaster
SKU: 0015407080296
Price: 41.08 EUR
Availability: InStock

Brand:WheelMaster

3.1/5

€
41.08

Estensore della valvola L'estensore della valvola a 45 gradi consente di accedere facilmente agli steli delle valvole anteriori e posteriori difficili da raggiungere. Questo resistente estensore per valvole in ottone nichelato è angolato per allungare le valvole dei pneumatici anteriori o posteriori. Questi estensori facilitano il controllo e il gonfiaggio dei pneumatici gemellati.

Quantity

Aggiungi al carrello Compra subito

EAN: 0015407080296

Categories: Settore automobilistico, Strumenti e attrezzature, Strumenti per pneumatici e ruote, Strumenti per la riparazione dei pneumatici,

Angolo di estensione: 45°. Questi estensori facilitano il controllo e il gonfiaggio dei pneumatici gemellati. Questi durevoli estensori per valvole in ottone nichelato sono angolati per allungare le valvole dei pneumatici anteriori o posteriori. Goditi un facile accesso agli steli delle valvole anteriori e posteriori difficili da raggiungere.

Brand	WheelMaster
Brand	‎WheelMaster
Country of Origin	‎USA
Customer Reviews	4.0 4.0 out of 5 stars 105 ratings 4.0 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item model number	‎8029
Item Weight	‎2.08 ounces
Manufacturer	‎Wheel Masters
Manufacturer Part Number	‎8029
Material	Brass
Number of Pieces	1
Product Dimensions	‎1 x 0.1 x 4.25 inches
Shape	Round

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Timbo Slims

Glad to see they came with the hex-nut style tightener, and not the knurled knob as shown in the picutre - so far so good.

These are pictured with the knurling on the threaded part that attaches to valve stem - I was happy to see when these arrived that they actually have a hex bolt style that you can tighten with a wrench. I have had the "finger tighten" type before, and always felt like I was not getting them tight enough - with the ones that arrived I could put a wrench on them and gently get them snugged up where I wanted them. So far so good, they have been installed for a couple of weeks with no signs of leakage. I have not taken an extended trip with them, only short trips, so I will update this review if anything changes or they do not perform as they should. I am using these on my Motorhome, front tires. Thanks for reading

Scritto da: seamus

sometimes the degree is off abit.. needed the 45 degree extensions, not the 180 degree..

that it was not 45 degrees, but 180 degrees

Scritto da: J-Rod

Good for bike rims.

I installed some new wheels on my bike and had to drill out the hole that I could get the schrader nipple through the presta hole. I was a little worried about this but after doing some research this is common for those of us in the US that can't get tubes at the store with presta valves. I bought these because the nipple just barely come out from the rim. I installed the one of the front and it seem to work fine.

Scritto da: jtx

... on front wheels of my RV so I can easily install and remove tire pressure monitoring units without having ...

Works well on front wheels of my RV so I can easily install and remove tire pressure monitoring units without having to remove the wheel covers. Even better that they have wrench tightening system rather than finger tightening system shown.

Scritto da: P. Mooter

So I bought these and they are fine and do what they're supposed to do

So I bought these and they are fine and do what they're supposed to do, but I used them on my RV tires and one of them had a rubber valve stem which is a no no on RV tires. And it wound of leaking even though I REALLY tighten them down. So..not using them.

Scritto da: Biker Doc

Recommended

I was told that the electrochemical reaction from the different metals might cause metal corrosion. I see no evidence of that after about a year. They work great on my SUV with deep hub caps. Far easier to fill the tires, especially in the winter with gloves on. No more bleeding fingers from wrestling the hose connector head into place. No more air loss from bad connections.

Scritto da: Deep Diver

Nicew Product

I really don't love it, but I really like them. Fit perfectly, so I gave it five stars. Was easy to install and have no leaks. The top of the valve stems on my new motorhome just come to the top of the dual wheel openings and I wanted to put some TPM sensors on the wheels, so I had to extend the valves. Nice product.

Scritto da: Michael Rolle

Works for me

These extensions have a nut for tightening to the existing stems and provide just enough angle to make filling the rear tire of a dual tire setup easy.

Scritto da: Herbert M.

Rock solid, air-tight extenders.

I bought these as a spare for my RV, just in case. They are the same type that I installed 2 years ago and they have never leaked any air yet.

Scritto da: Doug penny

The thread for the valve Not the Greatest but They Do Work

I bought these for use in on my Ford at 550. I recently bought 90° bends but they interfered with my chrome wheel covers. The thread for the valve Not the Greatest but They Do Work.

Scritto da: Robert

Good quality and perfect for front tires of RV

Good quality and perfect for front tires of RV. Stem cleared the Dicor rim cover and plenty long to take PSI of tire without having to remove the wheel cover.

Scritto da: Excell

Three Stars

They both went flat in the winter . But did stay up after tightening .

Scritto da: Phil S.

Work great on my motor home with dual wheels

Work great on my motor home with dual wheels. Now I can check the air with out taking the hubcaps off, Phil.