sourcing map AC 110V H3Y-2 RelÃ¨ temporizzatore a stato solido Timer 0-60S DPDT con presa

Name: sourcing map AC 110V H3Y-2 RelÃ¨ temporizzatore a stato solido Timer 0-60S DPDT con presa
Brand: uxcell
SKU: 0711331262486
Price: 39.93 EUR
Availability: InStock

Brand:uxcell

3.3/5

€
39.93

AC 110 V H3Y-2 H3Y Relè temporizzatore ritardo 0-60 secondi 60 secondi 60 secondi con base . Materiale: metallo, plastica; Peso netto: 69 g; Contenuto della confezione: 1 x relè temporizzato con presa

Quantity

Aggiungi al carrello Compra subito

EAN: 0711331262486

Categories: Strumenti e miglioramento della casa, Elettrico, Temporizzatori,

Dimensione presa: 75 x 22 x 30 mm / 3 x 0,87 x 1,2 (L * W * H); Altezza totale: 88 mm / 3,5; Presa relè abbinata: PYF08A. Intervallo di tempo: 0-60S; Tipo di guida montata: guida DIN da 35 mm; Dimensioni timer: 57 x 27 x 21 mm / 2,2 x 1 x 0,8 (L * W * H). Pin: 8; Sorgente: CA 110 V; Contatto: carico resistivo 5A 250VAC. Marca: Assisi; Modello: H3Y-2; Colore principale: grigio, nero; Tipo di contatto: DPDT. Paese di produzione: CINA; Materiale: metallo, plastica; Peso netto: 69 g; Contenuto della confezione: 1 x relè temporizzato con presa.

Brand	uxcell
Coil Voltage	110 Volts
Contact Type	Dpdt
Current Rating	5 Amps
Is Discontinued By Manufacturer	No
Item model number	a14112200ux0142
Manufacturer	uxcell
Mounting Type	DIN Rail Mount
Package Dimensions	6.06 x 5.04 x 1.81 inches; 1.06 Pounds

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Nick in STL

Check the function of the relay before you order.

The only problem with the relay was that they Don't make it clear that this relay is designed to open or close a contact after you energize the relay and then wait for the amount of time that you have set the delay to start, after the relay is energized. Instead of a relay that is designed to open or close a contact at the time that you energize the relay, and then after the time that you have set the delay the relay will reverse the open and closed contact back to the resting position. The other problem is that they do not have two post that you hook up the button too. You have to use one of the sets of contacts and do a funny wiring job to hold the contact in, after it is engaged. I have to order a different relay.

Scritto da: ITPhoenix

Good deal for money.

It worked. I needed to switch a coil so a TVS was added since the contact rating does not indicated inductive loads. It will only be used in a fail safe circuit so I expect it to be dependable for the few times it will be used. As far as the longevity of the timing circuit and the mechanics, I have no way of rating since it has no hours or cycles on it. It is fairly heavy so I suppose it is built decently. The terminal screws are long enough so the wiring guy does not have to fight to get them in. 14ga. is reasonable and probably 12ga could squeeze in. Giving 5 stars for the price.

Scritto da: Scuff & Miss Q

I added sometime to it maybe another 1/4 second so that the total time is about a half second and it works fine.

I bought this to run a air solenoid and when set to under a half second it can be a bit finicky. i.e. it would actuate the solenoid for a very short amount of time and then the next time it be the setting I have it set to. I added sometime to it maybe another 1/4 second so that the total time is about a half second and it works fine.

Scritto da: Mike E

As advertised

Works as advertised. I installed it into an older pro audio amp to have a delayed turn on to the speaker connectors and an instant off. The amp was doing 5 volt dc after shutdown and I was worried about speaker damage. This does the job perfectly. As I don't care about the exact turn on delay I don't know how accurate it is. Serves my purpose perfectly.

Scritto da: Mr. P.

Product worked well for my application.

Product worked well for a timing application I needed. I would have given this five stars had I not needed to spend additional time locating wiring diagrams from an other vendors website for my application. SO make sure you know for sure this relay will work for your application. Price, with socket, is the best I could find. Just limited on additional documentation.

Scritto da: Phil G

It works very well and I can easily adjust the delay up to one minute

Bought this in error as I didn't really need a DPDT switch, but I'm using it along with a Smartthings Zwave outlet to delay the switching on of a table lamp with a regular LED bulb. It works very well and I can easily adjust the delay up to one minute.... the timing is fairly accurate. The 9 watt LED bulb I'm using draws less than one amp, but the relay still gets quite warm to the touch.

Scritto da: MG

Works as expected

Installed in series with the pump on a commercial espresso machine to add adjustable pre-infusion. Works perfectly for this purpose and set time seems reasonably accurate. Easy to adjust for 4-6 second delay. Time will tell how long it lasts buried inside a chassis with a 5L boiler but so far so good.

Scritto da: M. Waldron

extremely happy with both

This is the second timer I've ordered, extremely happy with both, I'd ordered the 0 - 10 Minute timer, and had another application for a 20 second timer, so I ordered the 0 - 60 second timer. Very nice, high quality timer.

Scritto da: Israel Arteaga

Buen producto

Buen producto

Scritto da: Gaëtan Léveillé

Livré en temps

project privé

Scritto da: 黒ちゃん

性能に満足しています

ソーラー発電の自動出力切替えに使用しています。インバータを『ON』にすると、自動的に商用100vからソーラー100vに切替えるロジックを組込みましたが、インバータの出力が50v付近になるとパワーリレーが励磁し切替わり、50vの低電圧により接続した加湿器が誤作動してしまいました。そこで、このタイマーリレーをロジックに追加し、インバータの出力が安定してからソーラー100vに切替えるように改善しました。(写真１) 今では加湿器も誤作動しなくなり、安心して使用しています。 Rev.2 冬はコタツと加湿器を使用していましたが、暖かくなってきたので、テレビと空気清浄機に負荷を切替えました。バッテリの容量が低下しインバータを『OFF』にしたとき、今度は、テレビが誤作動(画面が消え再起動がかかる)ようになってしまいました。原因は、インバータが『OFF』になって出力が緩やかに低下するが、タイマーリレーの励磁が遅れて切れる事で低電圧が供給され、誤作動していました。そこでタイマーリレーを強制的に『OFF』するロジック(切断SW：写真２)を追加しました。インバータを『OFF』する前にタイマーリレーを『OFF』することで、ソーラー100vから商用100vに瞬時に切替えられ、テレビの誤作動も解決しました。

Scritto da: APT

なんとか使えます

さすがオム〇〇の模倣品って感じ。ダイヤルはむちゃくちゃ固く目盛精度も全くあてにならない。ソケット（型名までオム〇〇コピーwww）のネジ端子はグラグラで外れる寸前。でもON/OFFディレイタイマーとしてダイヤル目盛は無視して実働試験で安定して動作しています。部材調達困難のこの時世、趣味の範囲では充分に使える部材です。

Scritto da: うんぱっぱ

オムロンの製品と区別がつかないくらい良くできたコピー商品です。

オムロンの製品と区別がつかないくらい良くできたコピー商品です。しかも価格は１／３程度でしょうか。オムロンの中古買うより安いですし、中古はどんな使われ方してたか分かりませんので不安があります。問題は耐久性ですが、これは本気で耐久試験をしないと分かりませんね。端子配列もオムロンと同じなので万が一の場合は差し替え可能です。