PSI Woodworking L5818 Adattatore mandrino per paletta tornio da 5/8" Shopsmith a 1" x 8tpi Shopsmith da 5/8" a 1" x 8tpi

Brand:PSI Woodworking

3.7/5

€
56.27

Converte il mandrino del tuo tornio Shop Smith in modo da poter utilizzare mandrini con filettatura da 1 x 8 tpi. Si adatta al mandrino senza filettatura da 5/8 di pollice per accogliere qualsiasi accessorio di montaggio femmina da 1 x 8 tpi. Realizzato in acciaio, ha una vite di fermo per stringere il piatto sul mandrino. Estende la lunghezza del mandrino oltre 1 pollice.

Quantity

Aggiungi al carrello Compra subito

EAN: 0689076537698

Categories: Strumenti e miglioramento della casa, Utensili elettrici e manuali, Parti e accessori per utensili elettrici, Parti e accessori per tornio, Accessori,

Gli appartamenti consentono una solida presa dell'utensile per chiavi per il serraggio e l'allentamento dal mandrino; Chiave non inclusa. Include vite di fermo per bloccare l'adattatore al mandrino. Fatto di acciaio; Pesa 0,65 libbre; Estende la lunghezza del mandrino di circa 1-1/4. Consente a un mandrino non filettato 5/8 di accettare mandrini filettati 1 x 8tpi, piastre frontali e altri strumenti e accessori per la tornitura del legno. Converti un mandrino per paletta per tornio Shopsmith 5/8 non filettato in 1 x 8tpi filettato.

Batteries Required?	‎No
Brand	PSI Woodworking
Compatible Devices	Lathe
Customer Reviews	4.7 4.7 out of 5 stars 1,819 ratings 4.7 out of 5 stars
Included Components	Spindle Adapter
Included Components	‎Spindle Adapter
Item model number	‎L5818
Item Package Quantity	‎1
Item Weight	0.65 Pounds
Item Weight	‎10.4 ounces
Manufacturer	‎PSI Woodworking
Material	Alloy Steel
Material	‎Alloy Steel
Part Number	‎L5818
Product Dimensions	‎4.5 x 2.5 x 2.5 inches
Size	‎Shopsmith 5/8" to 1" x 8tpi
Style	‎Headstock Spindle Adapter
Warranty Description	‎2 Years Under Normal Use

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: CR

PSI Woodworking LA341018 Lathe Headstock Spindle Adapter 3/4" x 10tpi to 1" x 8tpi

Works as expected.....Recommended...!!

Scritto da: Wood Lathe hobbiest

Lathe Headstock Spindle Adapter

Part allows me to turn bowls and round mallet bases on an 80 year old lathe. Fits perfectly.

Scritto da: Amanda

Great quality

Fits as it should, works flawlessly.

Scritto da: Phycophile

Heavy adaptor with good concentricity that can be improved with a few modifications.

I bought this adapter when I upgraded from an (very) old Delta lathe with 1 x 8 treads to a newer Jet 1824 electronic variable speed lathe with a 1 1/4 x 8 spindle. I had a large collection of faceplates, including some that were made into vacuum chucks that fit on the Delta spindle but not the Jet. It probably would have cost more than $150 to replace all these faceplates. Instead, I purchased this adapter. It also let me use the new lathe to finish a couple of projects that were in progress. The adapter was much more substantial than I expected for the price. In general, it seems very well made. I had two issues with it, both of which could be addressed with minor modifications. First, when I initially mounted a faceplate to the adapter and then to the late, I had a lot of wobble in the faceplate. At first I thought that the adapter was non-concentric. But the problem was that the thread on the PSI adapter bottomed out on the female threads of the faceplate and prevented the shoulder of the adapter mating with the shoulder of the lathe spindle. The wobble was reduced very significantly by making a 3/16 inch plywood spacer and mounting it between the adapter and the faceplate. It still has a minor wobble, but I am not sure if that is the result of the lathe spindle, the adapter or the faceplate. If the PSI adapter had been manufactured with a slightly shorter threaded portion use of a spacer would not have been necessary. Secondly, this adapter is solid, and therefore cannot be used as is with a vacuum chuck. I solved this problem by drilling a 3/8 inch hole down its length. The adapter is not hardened so its easy if you take your time. I was able to get a different spindle adapter for my Teknatool G3 chuck, so I will not be using this PSI adapter for use on the 4 jawed chuck. I think that changing out the chuck adapter is probably much better that use of this PSI adapter with a chuck, both because of concentricity and because the headstock to bowl distance is as short as possible. Overall I am satisfied with this purchase.

Scritto da: Jeff

Good Quality, Great Price

The above picture of this adapter doesn't do it justice. I was surprised at the quality. This item is a large, heavy weight, finely machined and polished spindle adapter. Both ends screws on smooth. It's top quality at a price that's cheaper than PSI (Penn State Industries), sales it for. And a lot cheaper than other adapters are sold for. View my photos for more detail. It turns true and on center. It doesn't have set screws to lock it to the spindle for reverse operation, but I can drill and tap a couple of holes for set screws if it becomes necessary. It has a solid core on the male threads so you can't use a vacuum chuck. On the female end there are two flat spots for a wrench if necessary. I use an 'Adjustable Slip & Lock - Plumbers Nut Wrench,' its cheap light weight and can accommodate the large size of the adapter (search Amazon # TW408302). The adapter does jamb tight against the chuck and/or spindle so the wrench might come in handy. The nut wrench is also sold at local home improvement centers. This adapter screwed nicely onto my lathe's spindle, right over the shoulder of the spindle to mate with the shoulder of the adapter, as if it was made specifically for my lathe. I did read a magazine Q & A article where someone said their adapter didn't screw on far enough to seat onto the shoulder of the spindle and was asking if he could use a stack of large washers to fill in the gap. The answer was - not a good idea to use washers from the hardware store due to variation in hole ID and thickness from one washer to another. It was suggested to use 'Anti-Lock Lathe Spindle Washers' to fill in any gaps (search Amazon, about $2). Maybe this might help others, but it was not an issue with my lathe. Specs: OD at female end: 2 1/16" Depth of female pocket: 1 1/2" Depth of shoulder inside female pocket: 1/4" Length of male threaded end: 1" Total length: 2 3/4" Wrench size to fit flats: 1 13/16" Weight: 1 lb. 4.8 oz. [See my photos for more detail.]

Scritto da: R Martin

I had to modify it to fit

The product appears to be well built, but in order to use it on my older Shopsmith, I had to use a Dremel tool with an abrasive stone to ream it out (not much, but it was not going on without doing so). It is supposed to fit the 5/8" arbor on the Shopsmith. It does now. Tight tolerances.

Scritto da: MKB

Beware - I checked it to a 4" Lathe chuck and locked onto shopsmith - but

I turned it on, shut the shopsmith and as it was winding down, the lathe chuck unwound from the adapter. LUCKILY , I had a hockey puck in the jaws of the chuck and as the lathe chuck came lose, the hockey puck kept the chuck from flying off because as the chuck unwound, the puck pressed against the drill bit I had in place. If this went flying, with its sheer weight could have easily killed or mamed me or anyone around. I believe with he force, it would easily go thru a wood wall and damage whatever is on the other side. I don't know what to do to hold this from spinning off when winding down, please feel free to help I just applied red loctite to the threads and will wait 24 hours to cure, but would feel better perhaps drilling a hole, tapping it and inserting a set screw, but I really hate to alter the chuck as it is perfect and I may drill thru something that aligns the heads so feel it is above my pay grade to do this.

Scritto da: John D Renner

Great, but Needs a Breaker Bar Hole

Great adapter - heavy, durable, and dead-on centering - Can move work from "small" to "large" lathe without any changes or eccentricity. Only complaint is that there is no breaker-bar hole to disengage it. Instead there is a skinny 1-7/8" wrench flat - what turner has a 1-7/8 wrench sitting by their lathe? None of them. Should have a breaker-bar hole, like every other lathe accessory in the world.

Scritto da: dave

Excellent product

Excellent product fits like a glove thank you.

Scritto da: Mr. Ronald L. Alcock

size matters

the product is good but it has grub screws to stop the adaptor undoing in revers but no grub screws to stop the chuck from coming adrift when the lathe is in reverse

Scritto da: Jamie

Fit is perfect

Feels like a solid heavy duty piece. Only place I could find an adaptor for my 35 year old lathe and it fits great. They also refunded import fee as it was less than expected.

Scritto da: charlieboy

Woodturning.

Good service excellent quality.

Scritto da: JR

Not as specified

Diameter or thread of both ends was not as specified. Would not mount on 1" by 8 TPI lathe spindle or into 1 1/2" 8TPI chuck. Ordered twice with same result indicating it was not a one-off mistake.. Tooling looked good though. Returned both and got refunds. Ordered an adapter from another vendor that fit perfectly.