Portabicchieri NOVA per Walker, Rollator, sedia da trasporto, sedie a rotelle - Adattamento universale solo su tubo tondo, portabevande regolabile e pieghevole

Name: Portabicchieri NOVA per Walker, Rollator, sedia da trasporto, sedie a rotelle - Adattamento universale solo su tubo tondo, portabevande regolabile e pieghevole
Brand: NOVA Medical Products
SKU: 0652308710008
Price: 45.01 EUR
Availability: InStock

Brand:NOVA Medical Products

3.3/5

€
45.01

Portabicchieri NOVA per Walker, Rollator, sedia da trasporto, sedie a rotelle - Portabevande universale, regolabile e pieghevole

Quantity

Aggiungi al carrello Compra subito

EAN: 0652308710008

Categories: Forniture e attrezzature mediche, Ausili per la mobilità e la vita quotidiana, Ausili e attrezzature per la mobilità, Deambulatori, deambulatori e accessori, Portabicchieri,

L'INSTALLAZIONE FACILE E VELOCE richiede solo un cacciavite Phillips. Guarda il video per istruzioni facili. SI PIEGA RAPIDAMENTE quando non in uso prevenendo danni al portabicchieri e mantiene il tuo prodotto per la mobilità ottimizzato. IL PORTABICCHIERE È REGOLABILE per contenere e fissare tazze e bevande di diverse dimensioni da 2,25" a 3,75" di diametro. L'altezza del supporto è di 4 pollici con un'apertura per consentire il manico della tazza e della tazza da caffè. VERSATILE & UNIVERSAL FIT si attacca alla maggior parte dei deambulatori, deambulatori, sedie di trasporto e sedie a rotelle. Il design brevettato e unico consente al portabicchieri di fissarsi su un tubo inclinato mantenendo il portabicchieri dritto ed equilibrato. Si attacca su tubi di diametro 3/4", 7/8" o 1" a qualsiasi angolazione. UN PORTABICCHIERE È UN MUST, e questo è il portabevande regolabile perfetto per il tuo prodotto per la mobilità. Realizzato in plastica resistente.

Brand	NOVA Medical Products
Color	Black
Country of Origin	China
Domestic Shipping	Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item model number	CH-10000
Manufacturer	NOVA Medical Products
Material	Plastic
Product Dimensions	4.5 x 1.25 x 7.5 inches; 6.08 Ounces
Product Dimensions	4.5"L x 1.25"W x 7.5"H

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Stephen Barnacle

Material that its made of

I absolutely love it but I think it needs to be made out of something else besides plastic. Needless to say I have purchased 5 of them just so to replace either the arm or tray that has been sheared off. Speed is not the problem.????

Scritto da: Kathy Johnson Luck

Perfect for walker

This is the second cup holder I purchased for my walker. The first one dumped my water the second I accidentally bumped it. This one not only clamps the container, the clamp can easily adjust to most containers or bottles. It also folds completely flat so when I fold up the walker to put it in the car, the holder isn’t in the way nor does it get snapped off.

Scritto da: stacie1117

Helps prevent spilled beverages!

I highly recommend this to anyone who uses a rollator walker. Prior to buying this I would attempt to balance (which resulted in many messes) my drinks on the cushion seat and walk at the same time. I never knew a product like this existed but it is almost a necessity now!

Scritto da: BikerDan

Fits good on Rolator.

Mom in law has a rolater. There were few places to put it, but we worked it out. She loves it.

Scritto da: James Laurie

They actually made a worthwhile improvement

I use 2 at a time. They work great for my Walker. I originally bought them 4 years ago. I have broken 2. My fault both times. The original they gave you a piece of rubber to wrap around the pole for the bracket. It was difficult putting that rubber in and lining up the bracket while screwing it in. Now they have a rubber piece that is designed to embed in the bracket so it stays put. It was by far the easiest installation I have made. I’ve broken a few walkers so.I had to reinstall then too. This is a little bit bigger. It look like they made some design changes, I’m guessing for specific situations. Nothing that would that effects performance. They also added a little sticker to go at the bottom for the drink to sit on. I would highly recommend this coaster. I have another coaster on another walker, but it doesn’t fold up near as easy as these.

Scritto da: Charles J.

Easy to mount cup holder is a must for wheeled walker users (& others)!

I purchased this cup holder for my mother to use with her walker (the kind on wheels). She loves it and uses it often. Because I had seen her trying to carry a glass of soda or water while holding onto the walker and I thought that was dangerous so I purchased this for her. Only issue which isn't one for my mother is: When you have the adjustable cup holder arms pulled out all the way, you cannot completely fold it back up unless you adjust them in a little (wouldn't want to have to pull the arms open and then close them every time you fold it up). But I have it open to the point where it closes without changing anything and still holds the biggest cups she uses which are fairly large cups. It folds up so it isn't in the way when not in use. I had to use both rubber stick on pieces to wrap around the tube I mounted it on because it was thinner at that point. It has two pieces (diff. thickness) of sticky rubber to put around the tube to make it thicker (if not thick enough at that point) when screwing the mount into the bar/tube section. You can angle it to be level before you tighten it onto the mount so it doesn't matter at what angle the tube section is you mount to, it will still be level when done. I mounted hers to the partially padded removable section that is like a back piece when you sit on the walkers pad to sit down and rest. I mounted it on that part and on the inside. I did this so when she has a cup in it, it is not sticking out and getting too close to doorways. When not in use she can fold it up and the padded seat section will still open up on hers to access the removable storage section on her wheeled walker. I think this type of mounting is the best because it does not affect function of the walker at all and keeps the cup and holder safe from being bumped into walls or doorways when in use and moving around. I would highly recommend the same mounting if you have the option on yours. Just test the mounting piece on the piece of tube at your mounting location, if it doesn't clamp tight onto it, then see which rubber piece (or both) you need to make it thick enough. I had to trim the first piece in length just a little bit with scissors. I removed the backing and applied one piece of rubber, then the other. Then I clamped the clamp on and then the cup holder was bolted to the clamp at a level position. It mounted very solid and works great! Ask any questions you like and I will answer best I can. I will add some pictures of the mounting location as well.

Scritto da: CJ Chicago

Does not fit the rollator with oval pipes

This holder does not fit on the Nova Petite Rollator that has oval shaped pipe structure. The company’s web site now shows a cup holder that is intended for the oval shape.

Scritto da: Alex Brown

Terrific little gizmos

Installed two of these on mom's walker. She uses one for her 500ml water bottle and the other for her perpetual cup of take-out coffee. The install quick and easy. They fold up out of the way quite easily. Took a few adjustments after using them for a bit to get them just so - out of the way of her knees when she's sitting, but not too far on the outside to be catching on doorways and such, and angled so that the walker still folds up. But now that they're just right, love them.

Scritto da: hollingb

the whole unit folds out of the way easily.

This cup holder is very flexible in terms of where you set it up. It has the capacity to fit on to quite robust tubing, or can also fit narrow tubing, based on variable layers of runner sleeves that fit under the compression housing. The housing also rotates to any angle in cause you are using an angled down-stay. The bottom shelf has raised edges to trap any spillage. The top supports ratchet in and out to provide a secure fit. They thought of everything. I mounted mine above the seat, so it does not project out beyond the walker edge, so does not hang up on doorways. For sitting, the whole unit folds out of the way easily.

Scritto da: Bluejay

great idea and very useful

quite a good cup holder, I attached it to my mother's walker and it's come in handy many times. I couldn't manage to get it perfectly straight though, so it's on a bit of an angle. It took a couple of tries to attach it properly so it does take a bit of effort, but I'm not that handy to begin with. easy to fold up and adjust to a drink's width. I would recommend it, I bought another for her wheelchair

Scritto da: Peggy Shepherd Johnson

Seems defective

Not very happy with this the mechanism to secure the holder to the walker - the back piece was “stripped” and the screws would not maintain the hold- looking inside the compartment not sure if the screws were too small or the plastic had not enough threads? The old cup holder I bought for my daughter lasted for years this didn’t even last a month - would not recommend

Scritto da: Terre Poppe

Doesn't work!

I was so excited about the possibility of having a cup holder on my walker, and I am so disappointed with this product. It came with two rubber(?) tapes to wrap around a leg on the walker. One was too thick and the piece that attaches to the leg could not be tightened in place. The other is too thin and the piece slips and slides. When I put the tray on, it didn't stay in place and seems much too unstable to actually hold a container that has liquids in it. This was a big failure and I'm still looking for a cup holder for my walker.