Kit tubo flessibile di ricambio Moen per rubinetti da cucina a scomparsa Moen grigio

Name: Kit tubo flessibile di ricambio Moen per rubinetti da cucina a scomparsa Moen grigio
Brand: Moen
SKU: 0026508218631
Price: 55.07 EUR
Availability: InStock

Brand:Moen

3.6/5

€
55.07

Il numero di parte del tubo è 187108. La confezione in cui viene fornito il prodotto mostra il numero di parte 150259. Include rondella in gomma e adattatori per tubo. Lunghezza del tubo da 68 pollici. Adatto al prodotto MOEN. Parte originale Moen. Tubo di ricambio per rubinetti da cucina Moen Pulldown.

Quantity

Aggiungi al carrello Compra subito

EAN: 0026508218631

Categories: Strumenti e miglioramento della casa, Impianto idraulico grezzo, Parti del rubinetto, Tubi per spruzzatura del rubinetto,

Brand	Moen
Color	Gray
Item Dimensions LxWxH	11 x 7.5 x 1.5 inches
Item Weight	136 Grams
Material	Plastic, Rubber

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Morgan &Chad Stiegler

Great fit

My dog chewed the last one and this has held up for years

Scritto da: Takia

5 minute replacement no tools and no muscles needed

I didn't rate the durability of this because I just put it on. However, I did reduce this review by a star because the replacement part has a plastic nipple instead of the brass that actually comes with the original faucet assembly. It's a part that's going to be pulled on multiple times of every single day. I'm not sure why Moen thought plastic was a good move. But who knows, it might last longer. The original hose only lasted 6 years. The charger in it lasted two. Take what you will from that, since I'm reviewing the hose not the faucet but the faucet in question is pictured below. Now as to the replacement hose it was a great price and very easy to swap out with the old one. 1. turn off the water valves under the sink. 2. Turn on your faucet to bleed sitting water and ensure there is no water being supplied to the hose you're replacing. 3. There will still be a little water in the hose, due to gravity, so put a towel under the sink to catch it. 4. In the photos you will see a slender black connector. If you have the same faucet brand just squeeze the two white prongs and push the release out. The nipple will fall right off of the connection. 5. Take the weight of that's the black bulb attached to the hose to make sure it automatically retracts back into the faucet. 6. Pull the hose up through the faucet by the head. 7. Once the hose is out of the faucet, upnscrew the hose from the head of the faucet. You should be able to do this by hand but there are flat sides on the attachment that allow you to use a wrench. Try to avoid pliers. If you are heavy handed you could cause damage. Theale part on the sprayer head is plastic. 8. At this point t you should have three parts on Your counter, the broken hose, replacement hose and faucet head. I used this time to clear the head of debris and calcium deposits with a veggie brush. 9. Screw the new hose onto the faucet head. I used some white plumbers tape and recommend it but it's not strictly necessary. 10. Feed the new hose back through the faucet which is easiest if you let the curve of the faucet match the curve of the hose. 11. Snap the nipple back in place and reattach the weight. I listed eleven steps but it amounts to five minutes of unclip, unscrew, screw, clip. No tools and no muscle needed. Value wise, even if the hose only lasts a couple of years, at thirty bucks and overnight shipping, I would still rate it four stars.

Scritto da: N. D.

So far so good.

I got one that was low priced. It was repackage in a bag with a thank you (!) from Amazon for buying a repackaged item. You’re welcome. :) It looks brand new and it was easy to install. So far so good.

Scritto da: Jonathan Stokes

Diameter of the hose/connector was too small.

The install was easy and it works perfectly. However, the diameter of the hose and connector between the hose and sprayer piece is too small. It all pulls down and retracts easily, but the sprayer doesn’t seat perfectly after retracting. It has a bunch of side to side play and sits ever so slightly offset. It doesn’t look terrible and still functions acceptably but it‘s definitely not correct.

Scritto da: Andrew Duffy

Fixed the issue

Hose had some small holes in it - so i ordered this to replace. so far so good. no issues. the same day delivery was clutch as well to avoid the kitchen sink being out of commission for a few days. Saw some people upset that it wasn't a copper head for the fitting, mine was plastic. not an issue for me at moment, as i have found the issues with these hoses is usually the small leaks near the wand/nozzle head in the tubing or fibers, not the fitting that connects to the water.

Scritto da: Bonnie

Facet repair

Great!

Scritto da: Spanky

Second hose from Moen

First my Moen shower head hose went after 4 years. Now this one went for my kitchen sink after 4 years. Let alone the dripping from the handle which has to be adjusted every so often. Never again! As far as durability with this one, it’s only been installed for one day. Time will tell! Never again!

Scritto da: Brett

Not an original moen party

Not an original part, I thought it was a play on words. Snap in side is plastic not metal, it was missing an o ring. Next time I would buy a cheaper version. this one works but not worth 25.00 when there is a 15.00 right beside this one on amazon pages.

Scritto da: M.

Fits like OEM, but the connection end is plastic not metal.

When I ordered this hose, the photograph of the part showed a brass connector end just like my original one. Instead, I received a hose with a plastic connector end. The hose was easily installed, and works fine.

Scritto da: John Donnet

Moen Replacement Hose Kit is EXCELLENT!

The Moen replacement hose kit was an excellent purchase because it was easy to install, fits well and saved me the cost of replacing the Moen pull down kitchen faucet.

Scritto da: retlawv

it appears to be an authentic moen part and fits perfectly into my Russo model tap.

I have a moen pull down tap where the pull down hose sprung a leak last week. I do have the bill for my moen faucet and contacted moen Canada for a replacement part which is supposed to be covered in the lifetime warranty. They said they would send me a replacement but it would take between 1 and 2 weeks to get to me. This would mean my kitchen faucet would be unusable for that time, so I decided to buy this hose in the meantime as it would get to me faster. I did wait to write this review till I got the moen hose and the replacement hose sent by moen is identical to this hose. My original hose had a brass fitting on one end but this one is plastic and so is the one that was sent by moen so it appears the design has changed. I did get the moen hose 3 days after this one so I could have waited for their part to arrive but it the 50 dollars I spent on this one was still worth paying to get my tap working 3 days earlier 3 days earlier. I now have a backup hose. The hose fits perfectly and has the swivel joint at one end and the plastic push in connection on the other. My original tap was the Russo model that is no longer produced.

Scritto da: Amazon Customer

MOEN kichen faucet replacement hose

We have a Moen kitchen faucet which we purchased from Costco several years ago. The hose started to leak near the spray nozzel so needed to be replaced. I originally ordered the less expensive one (approx $30) but it was 3/8 inch OD which was smaller than the old hose so returned it and ordered this one. This was the correct size of 1/2 inch OD and is Part No 187108. It was very easy to install (5 minutes) and is working perfectly. I am very pleased.

Scritto da: L. Leland Weisser

the perfect fit

Unlike the first hose purchased and now returned, this product exactly replaces our worn-out Moen kitchen faucet hose. When threading it in and down into the very snug receptor opening, I had to push upwards forcefully in order to make the end finally push down past what felt like an obstruction. The opening is so snug, it feels like a person ought not to have to force it through, but after the third attempt it ultimately popped down through and I could connect the end up into its fitting. It works beautifully now. YouTube has several helpful videos on how to replace a worn-out Moen pulldown hose.