Yost Morse F9WW Morsa Frontale

Name: Yost Morse F9WW Morsa Frontale
Brand: Yost Tools
SKU: 0789755001820
Price: 127.99 EUR
Availability: InStock

Brand:Yost Tools

3.6/5

€
127.99

GARANZIA: viene fornito con una garanzia limitata di 1 anno e un reso di 90 giorni. INFORMAZIONI DI SICUREZZA: L'uso improprio delle morse può causare gravi lesioni agli occhi, alle mani e/o ad altre parti del corpo. Le morse devono essere installate e utilizzate correttamente. Prima della configurazione e dell'uso, leggere, comprendere e seguire tutte le istruzioni descritte nel manuale. QUALITÀ DEI MORSETTI YOST: Ogni strumento Yost Vises è progettato per avere elevati standard di qualità, resistenza e durata. Apprezziamo la qualità rispetto alla quantità e produciamo prodotti sicuri e facili da usare. Offriamo supporto tecnico a vita per sostenere la nostra garanzia di qualità. MIGLIOR UTILIZZO: nella realizzazione di armadi, in particolare per fissare insieme 2 pezzi di legno mentre si fora o si sega il legno. Può essere utilizzato per bloccare e allineare i tuoi progetti di lavorazione del legno. MORSA FRONTALE: la morsa da falegname da 9 pollici Yost Vises F10WW è lo strumento perfetto per la tua officina domestica. Realizzato con una morsa per impieghi gravosi, ha un corpo in ghisa per una maggiore durata e una vite principale in acciaio solido per la versatilità.

Quantity

Aggiungi al carrello Compra subito

EAN: 0789755001820

Categories: Strumenti e miglioramento della casa, Utensili elettrici e manuali, Tenuta del lavoro, Utensili manuali, Morse, Morse da banco,

Brand	Yost Tools
Color	Blue
Item Weight	9 Pounds
Material	Cast Iron
Style	Modern

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Tyler Durden

Great Cheap little vise

I put this on the end of my woodworking bench as a secondary vise for my main leg vice and it works well. I stored it in storage for about 4 months over winter and I see no corrosion or rust after pulling it back out. This will take a little more setup to use at woodworking bench since you have to put together a face plate, but I had no problem doing this for the price.

Scritto da: sparky

Just what I needed

Works fine for a wood tinker, wish I had it years earlier.

Scritto da: paul

Quality produce, but would upgrade.

I’ve been using this vise for about a year and a half now and I would definitely say it works really well. For the price you pay it’s definitely worth it, especially over the big box store vises. Pros: - Very smooth and easy to open and close. Making your life easier when moving workpieces in and out, or swapping out different sized pieces. - you can definitely apply solid torque on the workpiece. You can really crank down on the vise and it holds that position well. Only fear I’ve had is breaking the wood and never the vise itself. - better than the ones you get at the big box stores for both price, size, and durability, from what I saw at least. Cons: - it will bend/flex if you try to clamp on 1 side of the vise. This is honestly the only reason I gave it 4 stars vice 5. Not a major issue or deal breaker for me (as of now), however, I would have preferred a more sturdy vise, but you get what you pay for. When I try and clamp on 1 side of the vise, I have to use a second piece on the other side of the vise to counter the flexing. If you’re looking at this product instead of a much more expensive vise, that, along with a quick release, are probably the only things you’re paying extra for, and it might be worth it if you are going to use the vise for smaller workpieces or working on end grain / generally securing the piece in a verticals position, which is pretty common for most people looking at this style of vise. Overall this is a good product, and I’ve loved having it in my shop, however, if given the opportunity to go back, I would probably just buy once and cry once, and buy a more expensive vise that will not flex or bend.

Scritto da: K. Day

Well made and it works great

Mechanically this device is very good. I also like the fact that the company supplies drawing with dimensions which does help with installation. Especially getting the clearance holes lined up. The main screw drivers machines well and makes this easy to turn in and I out.

Scritto da: Inaseateveryweek

Great Value for the Price

I purchased the Yost 9-inch vise to add a front face vise to a smaller woodworking bench. The bench is not that heavy so I needed something that would complement the construction without having to engineer a lot of support structure. This vise fit nicely and mounted in between the bench dog holes for a clean installation. I needed a medium duty vise with sturdy construction that would resist racking reasonably well but did not want to pay for the “premium” brands. Yost has been around for a long time, so I was familiar with older products. It took about 2 hours to mount on the bench, taking my time. I purchased a 7/8-inch dowel handle at a local woodworking store and made a face out of 2x6 stock to complete the install. It works the way I need it to. I believe the value for the price is really good in this price point. I would recommend to others.

Scritto da: hearlouis

9" Yost Front Vise

I started out with the 10" version, but decided it was to large for my needs. For the less than $2.00, I thought there wouldn't be that much difference in size. I was wrong. The 10" vise was 4lbs heavier and took more room to mount. Interestingly, the depth of the mounts were the same, about 4", but the width was wider on the 10". Had to build out the edge of my assembly table to accommodate, but very pleased with how smooth it operates. Used a 7/8" birch dowel for the handle and a couple of 7/8" rubber chair plugs for the handle ends. Used 6/4" cherry for the jaws. Note, no template for drilling the holes, but disassembled the vise and used the mounting flange to locate. I used oversized holes about 1/4" all the way around, to insure a friction free operation. As other buyers noted, would be nice if Yost included a template. Finished it with a couple of coats of rub on poly.

Scritto da: sfgadget

Good vise, tricky install, poor documents

Use a 1/2” diameter galvanized, 12” long “nipple” for the handle, with end caps. Mount jaw to vise with #12 3/4” wood screws. Use a 1.5” hole saw to bore the holes in the jaws. Use 3/4” birch plywood for the jaws. Use 1 1/2” pan head self tapping wood screws to mount the body to the underside of the bench. First time a did this. Lot of trial and error. Tried spade bits first for the bore holes. Bad result, lot of tear out. Threw out the first two jaws I made. Bore holes should be plenty big so you don’t get any contact or binding on the screw or support rods. UPDATE: 3/4 birch ply face jaw was inadequate. It hinged too much when I closed the vise on a workpiece, due to the shortness of the wood screws attaching the plywood to the vise. I upgraded the jaw to two pieces of 3/4 x6” red oak with #12 x1 3/4” wood screws. Very solid now.

Scritto da: kcmtnbiker

Nice low cost end vice

This seems to be well made for the cost. I have been using it for a few weeks and have no unexpected issues. When I say unexpected.... I assumed when I purchased this it would rack out if I tried to use only one side of the vise to hold something. As expected, if I clamp something that only takes up half or less of the clamping area the vice squeezes in more on the other side. This results in poor clamping of the object and I have to off-set it by putting a piece of wood on the other side to maintain even clamp pressure. When used properly, this provides good strong clamping pressure on the object.

Scritto da: Mr Paul chetwyn

Good quality

Very good vise just what I expected, good quality will work fine

Scritto da: Amazon Customer

Good quality worth the money.

Real sturdy vice. Simple enough to install even without a template. The opening is wide enough to clamp a 2x8 and work with it confidently. Had to make my own handle but a broken broom handle worked just fine.

Scritto da: Phillipp G.

Great Vise!

For about $50.00, one cannot beat the quality of this vise. I have installed it on a new bench I made this summer and found it to be everything and more that I require. I am very happy with the Yost 9" front vise and recommend it highly.

Scritto da: Armando

Robusta.

Peso, sensación y construcción bastante robusta. Requiere algo de ensamblaje preciso y no incluye mango, cual se debe construir. Lo recomiendo teniendo todo ello en cuenta.

Scritto da: JOSE DE JESUS VERDUZCO

excelente

muy buen producto