Watts ANKA (ASC1) Raccordo a innesto diritto per tubi in polietilene ad alta pressione da 1 "

Brand:Watts

3.6/5

€
27.89

Questo giunto diritto da 1 pollice x 1 pollice collega una gamma di tubi, tubi e tubi flessibili in polietilene di dimensioni nominali ID (diametro interno) con spessori delle pareti variabili. È riutilizzabile ed elimina la necessità di più parti di ricambio. Un unico dado prigioniero blu rimane sul raccordo e si infila all'esterno del tubo per sigillare la punta per una connessione senza perdite. La pressione massima è di 230 psi e la temperatura massima è di 140 gradi F.

Quantity

Aggiungi al carrello Compra subito

EAN: 0098268149937

Categories: Prodotti industriali e scientifici, Idraulica, pneumatica e idraulica, Tubi, tubazioni e tubi flessibili, Tubi,

Fornisce protezione senza perdite* ed è stabilizzato ai raggi UV per applicazioni fuori terra o sotto terra. La costruzione in nylon rinforzato con fibra di vetro di alta qualità offre resistenza alla corrosione e usura riutilizzabile di lunga durata. Veloce e facile da installare; Il collegamento può essere effettuato a mano, senza bisogno di attrezzi speciali. Collega in modo efficiente tubo, tubo e tubo in polietilene. Ideale per applicazioni agricole, di irrigazione, rurali e municipali e idrauliche.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Watts
Brand	‎Watts
Color	Blue and black
Color	‎Blue and black
Connector Type	Barb
Connector Type	‎Barb
Customer Reviews	4.5 4.5 out of 5 stars 96 ratings 4.5 out of 5 stars
Exterior Finish	Stainless steel
Exterior Finish	‎Stainless steel
Finish	‎Plastic
Included Components	‎Straight coupling
Item Dimensions LxWxH	1.55 x 7 x 1.75 inches
Item Dimensions LxWxH	‎1.55 x 7 x 1.75 inches
Item model number	‎ANKA
Item Package Quantity	‎1
Item Weight	‎3.98 ounces
Manufacturer	‎Watts
Material	Nylon
Material	‎Nylon
Number of Handles	‎1
Number Of Pieces	1
Number Of Pieces	‎1
Part Number	‎ASC1
Product Dimensions	‎1.55 x 7 x 1.75 inches
Size	Insert
Size	‎Insert
Thread Size	1 inch
Thread Size	‎1 inch
Warranty Description	‎Watts

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: mike

Repaired broken sprinkler line

This worked out well for a broken sprinkler line, no other tools needed, strongly recommend!

Scritto da: ohs0fast

It works!

Apparently the previous owners of this house bypassed the original copper on the main water line from the well and used poly. I nicked it with a shovel when digging up an adjacent line and tried to repair with a barbed coupling but the size seemed slightly off (not sure how old the poly was). I order one of these couplings not really having very high hopes, but it worked. I installed it and let sit under pressure (~40-50psi) for 24 hours before burying and it didn't seem to leak at all. No telling how long it will hold, but I'm very satisfied and relieved I didn't have to replace the whole line.

Scritto da: Richard

Minor threading difficulties, but worked in the end

Very simple to install. I needed 2 of these to patch my mistake. 2 of the threaded ends bit into the tubing quite well, the other 2 did not. This could have been due to my unique situation, but possibly have some hose clamps on hand just incase. The patch is holding and my sprinkler heads are working once again. I did not end up needing any additional components other than a knife to cut my tubes.

Scritto da: Ray

Fast and permanent repair

I damaged a one inch line in my lawn irrigation system, and wanted to avoid the expense of having the installer come out for the repair. I tried to do the repair myself, but the high pressure in the line kept causing leaks. When I found the Watts ANKA coupler, it seemed like the solution to my problem. I agree with a previous review - it took me longer to remove my failed repair than it did to install the coupler. Cut the tube, push the coupler in place, tighten the blue retainers, and you're done. Great product for a super price.

Scritto da: Pamela R Muth

Won't bite into my poly

I'm sure its a great product if you have the right poly. The product installed by my landscaper is apparently standard, but the product won't bite into it. Specs on New Zealand site specifically mention that it is supposed to work with a "low density" poly. Might not work for your application

Scritto da: John H.

Easy to install hose splice, no tools needed.

Someone ran over my irrigation line with a shredder. Installation of this coupler is a breeze, 1. Cut the pipe straight on both ends that you're trying to couple. 2. Push the pipe over the barbs. 3. Screw the hand screws over the pipe. Easy, quick installation. No hose clamps needed. No tools needed if the pipe is cut clean. Works great if you're in a hurry.

Scritto da: Genesis P-Orridge

The only thing that worked.

I tried silicon tape, epoxy, everything I could think of to repair a punctured irrigation system hose, waiting 24 hours on several occasions for epoxy to solidify. Countless times digging up, 'repairing' & burying again, only to see the area filling up with water again. I eventually tried this. It literally takes 2 minutes to install & it's the only thing I've found that truly works, & at a fraction of the cost of the other stuff.

Scritto da: Kurt E. Niska

This thing works

Punctured 1" irrigation line. Tried a coupler from a plumbing store with 3 hose clamps on each side torqued very tight and still leaked. This thing installed in 5 minutes and did not leak a drop. Took me longer to undo the first messy attempt than it took to install this item.