Scalpello Marples IRWIN per la lavorazione del legno, 1/8 di pollice (3 mm) (M44418N), blu 1/8"

Brand:IRWIN

3.7/5

€
29.55

DESCRIZIONE DEL PRODOTTO La lama lunga e il manico sottile e sagomato in polipropilene offrono una maggiore leva per un maggiore controllo, precisione e comfort. Lama in acciaio temprato forgiato solido ad alto tenore di carbonio per prestazioni superiori e massima ritenzione del bordo. Questi scalpelli per legno sono progettati per essere utilizzati con un martello di legno o con il palmo della mano. Gli scalpelli IRWIN Tools Marples sono leader del settore per i falegnami da quasi 200 anni. IRWIN Tools Marples Scalpello per la lavorazione del legno, 1/8 di pollice (3 mm) (M44418N) DAL PRODUTTORE IRWIN Marples Scalpello M444/-1/8N BlueChip, bordo smussato 1/8 di pollice (3 mm) - Lo scalpello Marples è progettato per il falegname fine con una lama e un manico più lunghi per una maggiore leva. Lo scalpello Marples è più adatto per il lavoro a mano o con il martello. Lo scalpello Marples è realizzato con una lama in acciaio forgiato solido ad alto tenore di carbonio per la massima ritenzione del bordo. Per i falegnami pregiati, gli scalpelli IRWIN Marples rimangono lo standard mondiale, incorporando i vantaggi che li hanno resi un marchio leader del settore per quasi 200 anni.

Quantity

Aggiungi al carrello Compra subito

EAN: 0024721096715

Categories: Strumenti e miglioramento della casa, Utensili elettrici e manuali, Utensili manuali, Scalpelli, Scalpelli per legno,

Gli scalpelli IRWIN Tools Marples sono leader del settore per i falegnami da quasi 200 anni. Questi scalpelli per legno sono progettati per essere utilizzati con un martello di legno o con il palmo della mano. Lama in acciaio temprato forgiato solido ad alto tenore di carbonio per prestazioni superiori e massima ritenzione del bordo. La lama lunga e il manico sottile e sagomato in polipropilene offrono una maggiore leva per un maggiore controllo, precisione e comfort.

Batteries Included?	‎No
Batteries Required?	‎No
Blade Material	Alloy Steel
Brand	IRWIN
Color	‎Multi
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 1,322 ratings 4.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Handle Material	Polypropylene
Handle Material	Polypropylene (PP)
Handle Material	‎Polypropylene
Included Components	‎CHISEL WOODWK 1/8"
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎M44418N
Item Package Quantity	‎1
Item Weight	‎4.2 ounces
Manufacturer	‎IRWIN
Material	‎Blend
Number of Handles	‎1
Number Of Pieces	‎1
Part Number	‎M44418N
Product Dimensions	‎0.5 x 8.1 x 11.94 inches
Size	1/8"
Size	‎1/8"

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Robert O. Cox

Well made for the price.

Usable as it comes but you are better off lapping the bottom flat then putting a better edge on it. But then I like chisels extra sharp.

Scritto da: Sandra W.

well made

worked perfect

Scritto da: MGDOM

Excelente construcción

Muy complacido con el artículo, ya que la marca Irwin hace muy buenos productos y este no es la excepción, el mango se siente bien al tacto y no resbala, tiene buen filo, además , es ligero .

Scritto da: Anthony V.

A decent (not a great) chisel

As with any inexpensive chisel, you will need to resharpen often depending on the task. Ex. Chopping 3/4” mortises in 3x3 red pine ( a harder pine) I needed to resharpen after each mortise

Scritto da: Ron Z. Lemontree

MAKE YOUR OWN STATUETTES (Review #23)

(This is twenty-two in a series of reviews describing products used for the making of PHOTO STATUETTES. All 28 reviews are yours by clicking "Ron Z" and scrolling down or by clicking the x in Ron's x-tab (above). The series begins Nov 18, 2013 withElmer's Foam Boards, 20 x 30 Inches, 1/2-Inch Thick, Black/Black, 10-Count (951300) ). We have cut our bar(s) into various lengths and now it is time to choose one for a base. If you are in the process of making a full-length statuette an 8-inch base will probably suffice. Temporarily insert your statuette into its groove. See how "8" looks; then maybe try a "9". If you are making a bust-type statuette do the same, but of course with a longer base. Be sure to leave space on both sides of your statuette. For example, the bust I am making measures 7.5" wide, and, I have chosen a 10-inch long base. This shall leave 1.25" on both sides. The space serves as margins on both left and right. It's part of the design, or, the "overall concept". Return your statuette to a safe place. REMOVING THE ACRYLIC After choosing a base we must remove its acrylic nameplate; this, for a label and a Color-aid strip. Reinserted thereafter it is removed nevermore. Any removal procedure will do as long as it does not scratch the acrylic. Following are three methods one of which should be useful: METHOD #1 Start by pushing one end of the acrylic up and out using a non-slip gripper material:Set of 2 - Easy Non Slip Jar / Lid Opener Gripper Pad . Completely remove acrylic strip. METHOD #2 Here we'll be using a flat bamboo skewer:Pack of 200 Flat Bamboo Skewers for BBQ, Skewer, Shish Kabobs, Appetizers (6 INCH) . Sand pointed end to a gradual slope using your belt sander (Review #4). Push skewer into your 1/16th gap. Give it a tap with a hammer if needed. Lateral movement invites scuffs and scratches so slide it in at the groove's WALL as you push. Use the groove's wall to maintain a straight push. The process should raise the acrylic high enough for you to cajole and remove it by hand. METHOD #3 a. Use a 1/8th or 1/4-inch wood chisel. (My IRWIN 1/8th chisel [featured] has served me well). Run a strip of double-sided tape up the shank, over the blade and down the other side.Scotch Permanent Double Sided Tape, 1/2 x 250 Inches 3-Pack Caddy(3136) b. Remove excess tape from the sides of the metal shank by sliding a razor blade up or down. c. Run a flat shoelace up the shank, over the blade and down the other side. Press it securely against the tape.Skateboard Style Flat Shoelaces 3/8" Wide, incorrectly advertised as 1/2" wide, For All Shoes - 45" and 54" Lengths Then, with the shoelace acting as a buffer, apply your chisel to the 1/16th gap. Carefully force your acrylic strip upward for fingers to finish the job of removal. Cleanup: Remove tape from chisel. Use Goo Gone to eliminate sticky residue.Goo Gone 8 oz. - Removes stickers, grease, gum, tar, crayon & tape NEXT: Color-Aid.Coloraid Full Set of 314 Color Swatches - 4.5 x 6 Inches

Scritto da: Dale

Pleasantly surprised

For 5 bucks, I really had low expectations when I ordered this chisel. I've been struggling along with a 1/8" chisels I made out of an allen wrench so I figured if works even marginally better I/d be happy. Then I took it out of the package and was immediately struck by the heftiness of the shank. I don't know why but I wasn't expecting a mortise chisel but that's what this is. And I have to say it works really well for chopping a 1/8" mortise in hard maple. I don't know how many 1/8" mortises you guys chop but the test one I did was my first and likely two be the last 1/8" mortise but it worked very well for that. The sides are parallel which is more than I can say for a Narex mortise chisel I recently paid 5X as much for. It was actually usably sharp right out of the package and back is flat so I'm impressed with this $5.00 chisel. It's very likely I'll buy more of this brand. Even though I hate the blue plastic but I "Cosmanized" it with black hockey tape before I even took the plasic card off so that took care of that issue. All in all I'm very pleasantly surprised and quite happy with the purchase.

Scritto da: jkobi

Worked for me

I didn’t have high expectations for this because it’s not something I’m going to use more than once every few years, but it was totally fine for me. I do own a set of Marples chisels bought 30 years ago and this didn’t seem like too much of s drop off from those, but maybe my old set was more of an entry-level at the time of purchase? I just needed something to help deepen a wood channel for a .118” thick plexi insert that was cut a bit too wide. This came in a plastic bag so I can see how it could have arrived bent, but the point was well protected, very sharp, and it did not arrive bent, meaning I was able to use it right away. Good deal for the price and speed of arrival, and fills the smaller end of the set of chisels I already had (1”, 3/4”, 1/2”, 1/4” and now 1/8”). Worked out well for me.

Scritto da: Amazon Customer

chisel

works fine

Scritto da: David P

It's pretty good

Overall seems well made except that it arrived with the cutting edge slightly chipped, which is odd as it comes with a sturdy plastic edge protection, so it couldn't have happened in transit. Likely dropped on the assembly line by someone. Otherwise ok.

Scritto da: Amazon Customer

Un formón economico

Aunque la marca es irwin-marples, lejos se queda de ser una herramienta que merezca la pena de llevar la marca marples, es un formón echo en china y como todo lo echo en china tiene defectos en su fabricación, si buscas un formón económico para tú taller es una buena opción, pero si buscas un formón de mejor calidad te recomiendo otras marcas. Estos formones ya se quedan muy lejos de lo que fueron hace muchos años atrás.

Scritto da: Gregory

Good enough for the price

Hard to find 1/8" size. Most sets or single options start at 1/4". It's not something I'm going to use a lot but a size I need sometimes. Marples is a brand name but don't expect premium quality at this price level. Someone was whining that it had a nick on the cutting edge. My goodness imagine having to sharpen a tool before using it. It comes with machining marks on it including the cutting edge. I've had other tools chisels and plane blades that required less work to get to a good edge. This one took 15 minutes or so to get it to mirror finish all around and able to shave the hair on the back of the hand. Started with 320 and 1200 diamond stones and worked through various grits up to 10,000 water stone. That's a one time procedure though; re sharpening only takes a minute or two. The price is reasonable for the quality. It's listed twice by the way , same item, 2nd one over double the price, Amazon eh. The Narex brand has better steel but close to 6 times the price. If it was something you used a lot it might be worth it but for the price it's good enough.

Scritto da: Shamus Lit

Not made in Sheffield, England and not as shown in the photo

The photo for this item clearly shows it is a classic Marple (Irwin) Blue Chip Chisel with the smooth oval handle made in Sheffield England. What I actually received was a Chinese made, lumpy handled chisel. I did not use it and it may be OK but I think it is a bait and switch to show one product and then ship a different item. The original Marples rounded handle has a very good feel in the hand. The handle of this is flat on the end and has a much larger diameter. It also feels very much like cheap plastic. The photo shows what actually arrived. On a positive note Amazon refunded without a hitch.

Scritto da: Edwin R.

Highly Recommended

I bought this item with no great expectations of using it much. But I was wrong. Up to this point, my most used chisel was probably one of my trusty1-inch models (whichever was the most sharp at the time), but unexpectedly, I now find myself reaching for this this 2-inch chisel on all sorts of occasions such as adding finishing touches to my tenons or even mortises. I have found the edge to keep its sharpness as well as or better than my other medium-grade tools.