POWERTEC 20318-P4 Morsetto a levetta Push Pull 305CM - 500 lb Capacità di tenuta per impieghi gravosi, Morsetto a corsa del pistone con piastra di base flangiata, 4PK 4 Pack

Brand:POWERTEC

3.5/5

70.45

CAPACITÀ DI TENUTA: 227 kg/ 500 libbre. MONTAGGIO DELLA BASE: presenta una base con morsetto in ferro duttile che offre un funzionamento più stabile e sicuro, smorzando le vibrazioni e massimizzando l'assorbimento della forza di trazione insieme alla resistenza all'usura. MANIGLIA ORIZZONTALE: il morsetto a levetta sfoggia una maniglia in plastica a coste facile da usare che offre comfort, regolabilità ottimale e azione push pull che consente allo stantuffo di muoversi dentro e fuori lungo l'asse. FUNZIONE: Fornisce una rapida soluzione di bloccaggio a levetta di fissaggio laterale con una maniglia che si apre di 180 gradi ed è essenziale per l'uso con un assortimento di maschere, dispositivi, assemblaggi, il tutto fissando il pezzo in un posizionamento verticale o orizzontale. COMPRENDE: (4) Morsetto a levetta con corsa del pistone 305-CM con base in ferro.

CAPACITÀ DI TENUTA: 227 kg/ 500 libbre. MONTAGGIO DELLA BASE: presenta una base con morsetto in ferro duttile che offre un funzionamento più stabile e sicuro, smorzando le vibrazioni e massimizzando l'assorbimento della forza di trazione insieme alla resistenza all'usura. MANIGLIA ORIZZONTALE: il morsetto a levetta sfoggia una maniglia in plastica a coste facile da usare che offre comfort, regolabilità ottimale e azione push pull che consente allo stantuffo di muoversi dentro e fuori lungo l'asse. FUNZIONE: Fornisce una rapida soluzione di bloccaggio a levetta di fissaggio laterale con una maniglia che si apre di 180 gradi ed è essenziale per l'uso con un assortimento di maschere, dispositivi, assemblaggi, il tutto fissando il pezzo in un posizionamento verticale o orizzontale. COMPRENDE: (4) Morsetto a levetta con corsa del pistone 305-CM con base in ferro.
Batteries Required? ‎No
Brand POWERTEC
Customer Reviews 4.5 4.5 out of 5 stars 234 ratings 4.5 out of 5 stars
Included Components ‎INCLUDES:
Item Dimensions LxWxH 10 x 4.5 x 6 inches
Item model number ‎20318-P4
Item Package Quantity ‎1
Item Weight ‎3.09 pounds
Manufacturer ‎POWERTEC
Part Number ‎20318-P4
Product Dimensions ‎10 x 4.5 x 6 inches
Style 4 Pack
Style ‎4 Pack
Tensile Strength 500 Pounds

3.5

13 Review
5 Star
69
4 Star
21
3 Star
7
2 Star
1
1 Star
2

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Mark L. Beuligmann
Functional clamp
I bought this push-pull clamp to be part of a woodworking jig that will hold round wood knobs so that I can drill them to accept a threaded insert. It is solidly built and looks like it can apply the clamping pressure I need. Before you purchase this clamp, however, you need to know that the shaft does not have a close tolerance fit in the barrel. There is some wobble - almost 3/32" at the end of the shaft when the clamp is closed.
Scritto da: Don
Works great
Works great. built well , quality product . A little pricy for one clamp . but i only needed one.
Scritto da: Richard
Made a pen press with mine.
I made my wife a pen press for her woodturning hobby. It works great.
Scritto da: well-buzzed
These are small
These are not the regular size wagon brakes. They're fine, thought the handle doesn't stay locked if it is up.
Scritto da: M Ali Izadi
Very Good
Very Good
Scritto da: Tracey
They are what they are but moneywise I think that these could be cheaper.
They are what they are but moneywise I think that these could be cheaper
Scritto da: Ashley
great product
very strong , small in size, exactly what was needed to hold a 600 lb welding table
Scritto da: Pia R.
Handles fall down
The handles would fall down and would not stay in the unlocked position. We added Velcro to the handle to keep it up when needed. Locked position is great.
Scritto da: Tolly
LOOKS GOOD
Looks good for my pocket hole jig, not built yet but will update when completed.
Scritto da: Richard
This is a sturdy item
I have 2 of these clamps which will be used to build desk mounts almost identical to the very expensive name brands. The desk mounts are for a separate throttle and flight stick (HOTAS) for my flight simulator. The only other piece required to finish it is a small rubber furniture foot that can be purchased cheaply at most hardware stores. I am able to build the mounts with minimal tools and for about 1/3 the cost of the name brand mounts. For those interested simply google "DIY hotas mounts" or look at some images. I will include a few photos when the mounts are complete.
Scritto da: ramiro
herramienta facil de usar y poner
Me gusto lo practica de utilizar y lo que no me gusto es que tiene un tolerancia corta de agarre. Por lo que solo se puede usar con espesores poco variables de material. Es decir es corta la tolerancia del tornillo. Fuera de eso funciona perfecto
Scritto da: Kenny Tam
A bit too high
The centre of the cylinder is close to 3/4", which is mostly the wood thickness i work with. It would be better if the cylinder is 1/4" or 5-6mm lower.
Scritto da: Ricardo Guevara
EL MECANISMO QUE NO DEBE FALTAR EN NINGÚN TALLER SEA DE CARPINTERÍA, HERRERÍA, etc.
Es exactamente lo que necesitaba para complementar una plantilla para corte de bolsillo, tiene buena presión y la carrera muy bien también con el tornillo de ajuste se hace más versátil, el precio muy razonable vs los materiales de construcción.

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart