Pony 13025 Morsetto leggero da 3 pollici su morsa

Brand:Pony Jorgensen

3.5/5

78.78

DESCRIZIONE PRODOTTO Pony 13025 Morsetto per uso leggero da 3 pollici è progettato per uso domestico leggero, negozio e uso professionale. È completamente portatile, ma si monta facilmente e in modo sicuro su bordi spessi fino a 2 pollici. Caratteristiche: larghezza della ganascia da 3 pollici, capacità di apertura di 2-1/2 pollici, vite e maniglia in acciaio placcato, barre di guida doppie in acciaio consentono un funzionamento regolare, finitura smaltata al forno arancione previene la ruggine, ganasce per tubi fusi tengono il tubo tondo. La Pony Tools Inc. con sede a Chicago (precedentemente attiva come Adjustable Clamp Company), fondata nel 1903, è il produttore di tutte le morse Pony. I nostri Pony Vise sono realizzati in Cina. AMAZON.COM Ogni officina ha bisogno di almeno una morsa e l'incredibile morsa a morsetto di Pony è perfetta. È completamente portatile e si fissa a qualsiasi tavolo fino a 2 pollici di spessore. La maniglia scorrevole gira come un incantesimo e sei a posto. Per una morsa così incredibilmente economica, le ganasce sono davvero larghe e hanno persino una superficie seghettata, con una capacità aperta di ben 2-1/2 pollici. Possiamo pensare a mille usi per un dispositivo così pratico. È come una mano in più quando e dove ne hai bisogno. Pony si è guadagnata la reputazione di produttore di morsetti pregiati, quindi sai che qualsiasi cosa nel caratteristico colore arancione brillante andrà bene per te. Questa non fa eccezione.--Kris Jensen-Van Heste DAL PRODUTTORE Sia i professionisti che i fai-da-te apprezzeranno la costante forza di serraggio, la precisione e il funzionamento regolare della morsa a morsetto Pony Light-Duty. Le ganasce seghettate aderiscono saldamente, mentre le doppie barre di guida placcate in acciaio assicurano sempre un bloccaggio diritto ea filo. Una maniglia a perno scorrevole ti consente di ruotare rapidamente quando è centrata, oppure scorre per consentirti di utilizzare l'intera lunghezza del perno per far leva quando devi davvero appoggiare il materiale. Un morsetto inferiore fissa l'intera morsa a piani di lavoro spessi fino a due pollici. Le fusioni in ghisa grigia con finitura smaltata a fuoco arancione significano una maggiore durata dell'utensile. Più forte di morse comparabili, questa morsa Pony è anche economica. CARATTERISTICHE * Capacità di apertura della ganascia da 2-1/2 pollici per contenere una varietà di materiali * Ganasce seghettate da tre pollici per un serraggio costante * Il morsetto da tavolo si monta saldamente su piani di lavoro fino a 2 pollici di spessore * Doppie barre di guida per un bloccaggio positivo * Realizzato con acciaio placcato per una maggiore durata dell'utensile SPECIFICHE * Capacità di apertura 2-1/2 * Larghezza della ganascia 3 * Spessore del tavolo fino a 2 Vedi altro

Le doppie barre di guida in acciaio consentono un funzionamento regolare. Vite e maniglia in acciaio placcato. Si monta facilmente e in modo sicuro su bordi fino a 2 pollici di spessore. Capacità di apertura di 2-1/2 pollici. Larghezza della mascella da 3 pollici. Il prodotto è fabbricato in Cina. Utilizzato per utensili manuali e organizzatori di utensili, morsetti. Questo articolo è Pony 13025 Morsetto per servizio leggero da 3 pollici su morsa.
Batteries Included? ‎No
Batteries Required? ‎No
Color ‎Orange
Country of Origin ‎China
Customer Reviews 4.5 4.5 out of 5 stars 166 ratings 4.5 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Included Components ‎Product Information Guide
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎3-Inch Light Duty Clamp On Vise
Item Package Quantity ‎1
Item Weight ‎4.17 pounds
Manufacturer ‎Adjustable Clamp
Material ‎Steel
Measurement System ‎Inch
Part Number ‎13025
Product Dimensions ‎6.75 x 3.25 x 5.25 inches
Size ‎1 Pack
Style ‎Modern
Warranty Description ‎1-Year Limited Manufacturer

3.5

8 Review
5 Star
72
4 Star
12
3 Star
10
2 Star
3
1 Star
3

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Zach B.
Excellent for the Money and Intended Use
It's light duty and you should plan to use it as such. My current house is too small to have a dedicated workshop area, despite all the work I do on guns and other things. I got this so I could clamp it to the kitchen counter for an AR build. It's not as good as if I had a dedicated space for a medium duty vise, but it worked as well as could be expected. My two complaints are the depth of the vise and the clamp face surface material. When the vise is open you don't have enough depth to it for some needs.The top guide bar gets in the way. As other reviewers have said the clamp face is smooth paint. This allows slippage without a lot of clamp force but I don't see this as a big drawback as they make this stuff called... sandpaper. Skateboard tape would be another good way around this. Great vise that seems well put together. Just remember that it's quite small and for light use.
Scritto da: Triple Bogie
Very Solid built Vise for $20 Shipped - Great for Golf Grip Installation!!!!
I was looking for an inexpensive vise to use to install my new golf grips. I searched many others on ebay and Amazon and finally settled on this one due to the low price and free shipping. Today I installed my golf grips on my irons and this vise worked perfectly. You have to also buy the rubber shaft holder that surrounds the shaft when clamping down. I mounted this vise to my kitchen table and used 2 pieces of cut bicycle tube to protect the top and the bottom when gripping this vise to my table. The rubber also acted as a grip and held well. I could see way more uses from this vise but my main focus on buying this was for re-gripping my golf clubs. It makes aligning and installing the new golf grips onto the shaft really fast. I would rate this 10 STARS for the low price and good quality, but the MAX is 5 STARS.
Scritto da: Michael LaBossiere
A nice, small vise.
On the plus side, the vise is made entirely of metal (no cheap plastic parts) and can be secured via its clamp to a table, sawhorse or other surface. The jaws are smooth and while other reviewers have complained about a weak grip, I found mine to hold metal rods, wood and other items quite well. On the minus side, the pin used in one of the rods grinds against the body of the vise when opening the jaws. It is not hard to open the jaws, it is just a bit annoying. The jaws close smoothly. As the description says, this is a light-duty vise and is suitable for light work. It is really not designed for fine work-you would obviously want a specialized vise for things like tying flies or doing fine jewelry work.
Scritto da: Dan and Roe Sang
Clamp on vise
Like I can mount it any where. Have a rubber made cabinet outside and used it many times when I have cut or loosen any thing. Also like that it easy to come off and can store it and dose not take up too much room.
Scritto da: racer1
Ok for the price
I haven't used this vice yet and is smaller then I thought but clamps to surfaces I tried just fine. Be aware though this vice does not have jagged jaws to hold maybe slippery items as well but clamps tight enough so should be fine. Vice should work for what I bought it for, sharpening saw blades and or holding material for gluing, drilling or cutting etc although jaws only open to a little over 2" so it wont hold like larger PVC pipe or materials larger then that.. The fact that its portable is nice also so can be used anywhere there is something like a bench or table to clamp to.
Scritto da: Ron DiGiovanni
Deceptive Appearance
Somehow, this vise seems larger in the photo. The product description does not give any indication of the most important feature, namely, the jaws width. They're 3 inches wide, and so now you know how small the product really is. Also, in the photo the jaws have the appearance of having teeth, by the fact that they are not painted. However, in reality the jaws are perfectly smooth on the inside, and are painted orange like the the rest of the item. Fortunately, it works well for the specific purpose I had for it. The clamp is OK for this size of vise and the jaws have sufficient strength. But just keep in mind, this is most definitely a hobby clamp which is just perfect for your Dremmel tool, but most certainly not compatible with your angle grinder. Ron DiGiovanni Easton, PA
Scritto da: Mark Masaki
Solid painted metal; does what it is intended to do, but smaller than the picture suggests.
It is smaller than I expected, but also heavier and more solid. There isn't much space to work with for the bottom clamp, but it's designed to be attached to a table or desk anyway, so I give it 5 stars for what it can do for the money. There is no swivel of course, but no wiggle or slippage once it is clamped tight. There is no rubber stoppers on the vice, think "solid painted metal." You could probably kill someone with this if thrown, so watch out for your toes if you drop it. Mine had it's handle sticking out of the factory and shipping packages.
Scritto da: Duke VonMeep
Definition of meh
Meh. It works and is portable but don't think you are getting the same performance as a bolted down heavier duty vise. Many would consider this a light duty vise and I agree. So for what it is it is technically great and bump up the rating to 4/5, HOWEVER, advice is to only buy if for some reason you just are not able to get a bolted down vise (you live in an apartment and can't fit a work table/bench, you need to have it with you like in a truck or something) just get a bolted down vise as those are more capable and you probably will end up getting one eventually anyway and probably have access to a work bench.

Prodotti correlati

hot
hot
Morsa con base a morsetto BESSEY BV-CO30
2.9/5

€ 73.58

Morsa con base a morsetto BESSEY BV-CO30
2.9/5

€ 73.58

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart