PC Products Liquido adesivo epossidico trasparente PC, 16 oz in due flaconi, trasparente 70161 16 oz Due flaconi 1

Brand:PC Products

3.4/5

€
63.26

DESCRIZIONE DEL PRODOTTO PC-Clear è una resina epossidica liquida completamente trasparente. PC-Clear è formulato per rimanere trasparente durante e dopo il tempo di polimerizzazione. PC-Clear è molto resistente e flessibile, il che lo rende diverso da molti epossidici liquidi. Se è necessario mascherare una riparazione o l'assenza di colore, PC-Clear è il prodotto che fa per te. PC-Clear dimostra un'eccellente resistenza chimica ad acidi delicati, sostanze caustiche, detergenti, benzina, olio combustibile, sale e acqua dolce. Nota: PC-Clear non aderisce a carta oleata, teflon, polietilene e altre materie plastiche. Ci sono centinaia di materie plastiche in migliaia di combinazioni. Testare una piccola area in caso di dubbio.Consiglio: si prega di essere consapevoli del fatto che PC-Clear si riscalda quando si indurisce. Quanto si riscalda dipende in gran parte dalla quantità di resina e indurente miscelati. Maggiore è la quantità, maggiore è la quantità di calore sviluppata e la temperatura potenziale. Miscelare su una superficie piana o utilizzando un mescolatore statico. Prestare attenzione quando si applica a oggetti sensibili al calore. Indossare guanti ed evitare di entrare in contatto con la pelle o gli occhi. DAL PRODUTTORE PC-Products, che celebra i 75 anni di "Fixing Your Things", con prodotti di riparazione affidabili e di qualità. Soluzioni di riparazione per quasi tutto ciò che necessita di riparazione o ciò che riesci a rompere. Dal cemento al restauro del legno e alle riparazioni permanenti per impieghi gravosi, abbiamo quello che fa per te. Noi possiamo aggiustarlo

Quantity

Aggiungi al carrello Compra subito

EAN: 313913208617

Categories: Prodotti industriali e scientifici, Adesivi, sigillanti e lubrificanti, Adesivi cianoacrilati,

Forma un legame resistente per una maggiore durata. Fornisce un tempo di lavoro di circa 4 minuti, un tempo di indurimento per la funzione di 1 ora e un tempo di indurimento completo di 24 ore. Intervallo di temperatura di servizio continuo da -20 a +200 gradi F. Quando viene miscelato, diventa inizialmente opaco, quindi trasparente fino a completo indurimento per fondersi con il materiale legato. Liquido adesivo epossidico trasparente incolla legno, metallo, vetro, ceramica, cemento e tessuto.

Brand	PC Products
Color	Clear
Compatible Material	Wood, Glass, Ceramic, Concrete, Metal
Country of Origin	USA
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S.
Item Form	Liquid
Item model number	70161
Manufacturer	Protective Coating Co.
Material	Liquid
Product Dimensions	7.25 x 4 x 4 inches; 1.37 Pounds

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Gary96825

Great epoxy for repairing concrete cracks.

I’m in the middle of repainting our concrete pool deck and the last time I did this I use a latex filler for crack repair. That lasted a year or so before cracking again. While I can’t say how long this repair will last, the epoxy is significantly harder and sets into place much better than the latex paste. One drawback, it will take some grinding work to ensure the epoxy paint I’ll use will adhere to the slick surface. If this works, it’ll provide a much longer lasting, better looking repair.

Scritto da: Benjamin W.

Working time is too short to achieve both proper mixing and application.

When this product is mixed thoroughly, it performs well, but if you want to pour it, or work it into cracks, the mixing process is too time consuming for the amount of remaining work time. I needed to mix most of the 16 ounces, so I could pour the product into fairly large voids, so I short-circuited the recommended mixing instructions, in order to have more time for my pour and application. That turned out to be a problem. In some areas of my project, where A & B were not adequately present/mixed, the end result was that it did not harden, and remained somewhat sticky. I used this on a piece of apple wood I began turning on a lathe. There were parts of the wood compromised by rot and powder beetle tunnels, as well as bark space overlapped by other wood growth. For the most part, the pour went well, but the material that was not mixed properly, did not harden, and the result was that it did not "tool" smoothly, and it did not attach well to adjacent surfaces. So, I tried again on cracks that were revealed with more turning. I tried mixing a smaller amount. I tried to be more intent in the mixing process (which took longer). I was only a few minutes into the spreading of the product into holes and cracks, when a chunk appeared. Realizing it was beginning to harden, I worked feverishly to use product that was still liquid, but alas, I was only able to use about 80% of my mix before it got very hot, and hardened to the point it was not usable. I will admit, this is my first time attempting this kind of work with epoxy resin, so I don't know if there is a product out there that would be easier for me to get a "total mix" and still have enough open working time to get it applied. I wanted to include pictures, but am not savvy enough to know how to bring them over. Sorry. Ben

Scritto da: Jo

Not for areas that get frequently water drenched

It does stop the water from leaking, but this epoxy’s bought to seal and appear clear on a granite backsplash against granite countertop. It is clear when dry, but if the water, (from the faucet use), splashes on it and is allowed to stand, the epoxy turns milky-whitish, and is unsightly. Not buying it again.

Scritto da: Alan M. Gladstone

Not for gluing thin pieces.

I love PC PRODUCTS. This was a bit disappointing; it did not hold a glued up stone dish. Possibly it was my error- but even with a “ constructed jig” , clamping , and 24 hour dry time, it was a fail. I think it is still a very good epoxy; just needs sufficient surface area in order to hold.

Scritto da: Sideschulmpf

works fine

Glued marble together to build a bull nose counter top

Scritto da: J. Saunders

Pottery repair

This is a great product. Repaired broken pottery and this was suggested. Did a fantastic job.

Scritto da: Marge B

A little tricky to keep 50/50. But, even ...

A little tricky to keep 50/50. But, even if off ratio, it still cures - just a little slower. I used it to repair stress splits in an exterior table top. Once the cracks were filled, I top coated with Ephanies (sp?) exterior spar varnish. I'll know if is OK for exterior applications in about a year. I'll purchase this product again.

Scritto da: dsmblue

Great control and works as desired

Works as intended. Like the fact that you have separate containers for better control over glue output than you get with plunger type epoxies.

Scritto da: denis troesch

Great product

works great drys hard and clear

Scritto da: andy

Not very strong

No as strong as I expected.