PC Products PC-Pool Stucco epossidico, stick modellabile da 4 oz, bianco sporco 41116 Bianco sporco

Brand:PC Products

3.3/5

€
28.15

DESCRIZIONE DEL PRODOTTO PC-Pool Putty Epoxy è uno stucco epossidico modellabile a mano progettato per riparazioni rapide di emergenza. PC-Pool Putty Epoxy è formulato per aderire a superfici pulite, bagnate, asciutte e sommerse. Tagliare, mescolare e applicare. PC-Pool Putty Epoxy consente un tempo di lavorazione di circa 3 minuti e polimerizza per il servizio in 60 minuti. PC-Pool Putty Epoxy non si lega a carta oleata, teflon, polietilene e altre materie plastiche. Ci sono centinaia di usi in migliaia di combinazioni. Funziona sott'acqua. Ottimo per skimmer, piastrelle, cemento e molte altre applicazioni. DAL PRODUTTORE PC-Products, che celebra i 75 anni di "Fixing Your Things", con prodotti di riparazione affidabili e di qualità. Soluzioni di riparazione per quasi tutto ciò che necessita di riparazione o ciò che riesci a rompere. Dal cemento al restauro del legno e alle riparazioni permanenti per impieghi gravosi, abbiamo quello che fa per te. Noi possiamo aggiustarlo

Quantity

Aggiungi al carrello Compra subito

EAN: 308134586187

Categories: Prodotti industriali e scientifici, Adesivi, sigillanti e lubrificanti, Epossidici, Adesivi epossidici per piastrelle,

Può essere utilizzato in applicazioni sopraelevate e verticali. Fornisce un tempo di lavoro di 3 minuti e un tempo di cura per il servizio di 60 minuti. Intervallo di temperatura di servizio continuo da -20 a +200 gradi F. Modellabile a mano senza necessità di strumenti di miscelazione o applicazione. Lo stucco epossidico fornisce riparazioni temporanee di crepe in fibra di vetro, cemento, gesso, marcite e gunite e polimerizza su superfici umide, asciutte e sott'acqua.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	PC Products
Brand	‎PC Products
Color	Off - White
Color	‎Off - White
Compatible Material	Fiberglass, Gunite, Cement, Plaster, Marcite
Compatible Material	‎Fiberglass, Gunite, Cement, Plaster, Marcite
Country of Origin	‎USA
Customer Reviews	4.3 4.3 out of 5 stars 553 ratings 4.3 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Form	Putty
Item Form	‎Putty
Item model number	‎41116
Item Package Quantity	‎1
Item Volume	‎4 Fluid Ounces
Item Weight	‎4.2 ounces
Manufacturer	‎Protective Coating Co
Material	Putty
Material	‎Putty
Package Information	‎Stick
Part Number	‎41116
Product Dimensions	‎8 x 1 x 1 inches
Size	‎4 oz
Water Resistance Level	‎Water Resistant

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Amazon Customer

Works very well

I used this for an unusual application. Basically, as insulation on brass condenser tubing for a refrigerator. There was some kind of air leak from the inside of the refrigerator to the outside, causing condensation and ice to form on the brass condenser tubing, just at the point where it met the atmosphere outside the refrigerator, and then along the tubing for 6-8". I decided to use this epoxy to seal the leak AND to insulate the brass tubing. I was curious how it would work on the frozen tubing. It worked just fine! From past experience, I knew this type of epoxy is amazingly strong. What I didn't know is that it would work well in very cold temperatures. I cleaned the ice off the tubing, dried it off, and quickly applied the epoxy, so that frost wouldn't have a chance to form underneath the epoxy covering. It was easy to mold over the tubing, and cured pretty quickly, as expected. The ice is now gone, and so I am happy. I found this particular composition very easy to use. You just break off a chunk - I use a razor blade to cut it cleanly, so you don't combine the chemicals on the piece that you put back into the tube for storage. That prevent the chemical reaction from starting within the storage tube. Then you mold the stick you cut off with your fingers. I suppose you could be cautious and use gloves, because you don't want to leave residue from this stuff on your hands. But it doesn't really stick to your fingers, and since it cures so quickly, I found you can squish it to combine the two parts directly with your fingers, mold it in place to cure (you only get about five minutes!), and then wash your hands well with soap and water immediately afterward. There were no ill effects. None. It was kind of like working with regular window or plumber's putty. Great stuff!

Scritto da: ObsidianX

Works great for Salt water pool

I used this to patch up a few cracks on the waterfall from hot tub to pool in a salt water system. The epoxy gets hot and hardens in 3min. I recommend you use smaller amounts for the job at a time. If you can patch while the area is dry even better. If you need to do a wet application, make sure to apply even pressure do that it can bond and adhere to the surface. My application was from grout to tile. Working well so far at day 3.

Scritto da: Tom Tom

Does the job

Perfect material for fixing a leak.

Scritto da: Miki

Review for the Black Heat Resistant Glove

I am writing this as I have come back to buy another glove after purchasing my first glove for my Chirstmas stocking. I have used this glove for removing 400 degree and higher glass dishes and metal pans from my oven along side my big fat knobby red silicone BBQ grilling mit on my other hand. Both protect from initial heat but both will heat up with time and contact. This glove conducts less heat than the red BBQ mit for a longer time and cools off faster. Having the fingers of the glove is a ten times advantage over the mit. The red BBQ mit does have the advantage of being more or less hot water and grease proof. I would never grab anything glowing red with this glove unless it was a real emergency! In which case it would be safer than not wearing it. If I were to have anything to add to them it would be more silicone to the outside in a more ergonomical pattern as opposed to the graphic label design on the glove. Make it available in a larger size. Also a more water proof glove would be great. Overall, I'm very happy with this glove and the price with Amazon Prime is pretty good.

Scritto da: Juliet

Easy to Use / Works Great / Highly Recommend

This product was an excellent choice to quickly resolve a leak in my in-ground swimming pool. My leak was on the exterior of one of the 1½" Schedule 40 PVC pipes penetrating the side wall for the pump return jet. In my case the fitting for the jet nozzle was a friction fit to the pipe interior, so I slid out the jet nozzle so the junction between the 1½" PVC pipe and the cement / Diamond Bright wall was exposed. A utility knife was used to dig out any loose cement / Diamond Bright around the pipe prior to starting, increasing the leak slightly at this point. A suitable length of the epoxy rod was cut off, then mixed by hand until a uniform color was attained. That mixed epoxy was forced into the gap between the 1½" PVC and the cement / Diamond Bright, until I was unable to push any more into the gap. The leak was identified prior to the repair using liquid food coloring and a children's oral liquid medicine syringe. This permitted placing very controlled small drops of coloring in the water near the suspected leak, then watching the water flow forcing it through the wall gap. Once the epoxy repaired the leak, the food coloring demonstrated the leak was fixed.

Scritto da: Angie M.

Easy to use for pool

Had a slow leak around a jet in our salt water pool and have tried multiple products to fix it, none have worked. This product was easy to mix, just pull a small piece off and roll around with your fingers for about a minute then apply. If you wait too long it will get very hot and harden, so work fast. I used it under water and was gentle and it worked fine. So far, so good. I have almost an entire tube left in case I need to keep re applying.

Scritto da: James L.

Moldable, cures under water.

Fresh enough that only the first 1/4 inch is crusty, good to go after that. Toss the crusty bit, cut off the amount you need, knead what you cut, then mold in place. Cured adhesion appears good, though initial underwater tack is poor. Push in place and make sure edges stay in place during cure.

Scritto da: 1986 GLW.

did the trick.

had a crack in above ground skimmer neck. did not want to drain water to replace. used the putty as directed and it stopped the leak and last the season. Good product.

Scritto da: Amazon Customer

Works, but doesn’t last long

I used this on a crack on the stairs of an in-ground pool. Worked for about a month, but then began tj crack and come off. Worked for a short term fix

Scritto da: Adam Thompson

It works

It fixed my pool leak on the first try. It can be applied underwater so you don't need to drain anything. Pretty big amount -- I only used around a quarter of it. It seemed to stick to my fingers better than the pool material, but it stayed on.

Scritto da: Amazon Customer

Work very well

I had a small leak in my pool did work fast and well, there are years now and I can say still works. Buy with trust.

Scritto da: Li RT

The best product !!!

Put this around pool drain and it’s never leaked — BEST PRODUCT EVER!!!!!

Scritto da: Amazon Customer

Worked well in pool

as advertised, easy to mix epoxy and cured under water.