Nilight 50026R Manometro Digitale per Gonfiaggio Pneumatici, Mandrino Aria 250 PSI e Accessori Compressore Heavy Duty con Tubo in Gomma e Attacco Rapido per Risoluzione Display 0,1, 2 Anni di Garanzia Stile 1

Name: Nilight 50026R Manometro Digitale per Gonfiaggio Pneumatici, Mandrino Aria 250 PSI e Accessori Compressore Heavy Duty con Tubo in Gomma e Attacco Rapido per Risoluzione Display 0,1, 2 Anni di Garanzia Stile 1
Brand: Nilight
SKU: 0812227031411
Price: 44.38 EUR
Availability: InStock

Brand:Nilight

3.5/5

€
44.38

Indicatore digitale di gonfiaggio pneumatici Nilight 250 PSI - Garantisci la tua guida sicura! Ottenere una gomma a terra o troppo gonfia sulla strada può essere molto pericoloso. Controllare regolarmente la pressione dei pneumatici della tua auto è il modo migliore per assicurarti che i tuoi pneumatici non scendano mai molto al di sotto del PSI ottimale e mantenere te e la tua famiglia al sicuro. Controllare regolarmente la pressione dei pneumatici tramite il misuratore di gonfiaggio dei pneumatici Nilight può essere eseguito in pochi minuti ovunque o in qualsiasi momento. Collegalo semplicemente allo stelo della valvola del tuo pneumatico, puoi ottenere una pressione dei pneumatici istantanea e accurata che è testata sulle prestazioni e certificata con precisione all'1% con risoluzione del display di 0,1 per la massima precisione. Per tutti i veicoli, compresi quelli pesanti, come automobili, camion, motociclette, biciclette (sia per valvola Presta che Schrader), palloni sportivi (è necessario l'ago della sfera), ecc. Applicazione: Intervallo di gonfiaggio: 0 ~ 250 PSI Precisione: 1% Display Risoluzione: 0. 1 PSIDisplay: display digitale LCD Unità di misura: PSI, KPA, Bar, Kgf/cm² Alimentazione: 2 batterie AAA da 1,5 V (incluse) x batterie AAA 1 x rotolo di nastro sigillante per filettature 1 x strumento per il nucleo della valvola 2 x anello di ricambio Avvertenza: 1. Tenere il gonfiatore per pneumatici lontano dalla portata dei bambini per proteggere i bambini dal pericolo. 2. Si prega di togliere le batterie se non vengono utilizzate per lungo tempo. 3. Non smontare gli indicatori, ciò causerà perdite d'aria, visualizzazione errata o danni non riparati all'indicatore. 4. Non mettere il gonfiatore nel fuoco o in altri ambienti ad alta temperatura. Batterie da 5 V (incluse) Contenuto della confezione 1 x manometro per gonfiaggio pneumatici Nilight 1 x manuale utente 4 x tappi per valvole 1 x mandrino ad aria in ottone 2 x batterie AAA 1 x rotolo di nastro sigillante per filettature 1 x strumento per il nucleo della valvola 2 x anello di ricambio proteggi i tuoi bambini dal pericolo. 2. Si prega di togliere le batterie se non vengono utilizzate per lungo tempo. 3. Non smontare gli indicatori, ciò causerà perdite d'aria, visualizzazione errata o danni non riparati all'indicatore. 4. Non mettere il gonfiatore nel fuoco o in altri ambienti ad alta temperatura. Batterie da 5 V (incluse) Contenuto della confezione 1 x manometro per gonfiaggio pneumatici Nilight 1 x manuale utente 4 x tappi per valvole 1 x mandrino ad aria in ottone 2 x batterie AAA 1 x rotolo di nastro sigillante per filettature 1 x strumento per il nucleo della valvola 2 x anello di ricambio proteggi i tuoi bambini dal pericolo. 2. Si prega di togliere le batterie se non vengono utilizzate per lungo tempo. 3. Non smontare gli indicatori, ciò causerà perdite d'aria, visualizzazione errata o danni non riparati all'indicatore. 4. Non mettere il gonfiatore nel fuoco o in altri ambienti ad alta temperatura.

Quantity

Aggiungi al carrello Compra subito

EAN: 0812227031411

Categories: Settore automobilistico, Pneumatici e ruote, Accessori e parti, Compressori d'aria e dispositivi di gonfiaggio,

Compressore non incluso. La confezione include: pistola di gonfiaggio, rotolo di nastro sigillante per filettature, strumento per il nucleo della valvola, 4 cappucci per valvole, 2 anelli di ricambio, un manuale utente. INSTANT ON DISPLAY: display LCD retroilluminato integrato per condizioni di scarsa illuminazione. Ottenere la migliore misurazione precisa sarà entro +/- 1% di questo intervallo di pressione (0-200 psi), risoluzione (0,1 psi). Pressione massima 250 psi max. COSTRUZIONE SUPERIORE: Costruito con componenti in acciaio e ottone per impieghi gravosi di alta qualità che garantiscono prestazioni durature; Utilizzo di tutti i veicoli, come auto, SUV, camion, motociclette, biciclette (con valvola Schrader) ecc. 1 per la massima precisione; dispone di un luminoso display LCD 0-250 PSI che si spegne automaticamente dopo 2 minuti di inattività. Funzionalità ALL-IN-ONE: lo schermo retroilluminato a LED presenta misurazioni in PSI, KPA, Bar e Kg/cm²; Include una pistola di gonfiaggio, un mandrino, un manometro, un rotolo di nastro sigillante per filettature e una valvola di spurgo, tutto in un'unica unità; Compatibile con l'uscita del compressore d'aria da ¼ NPT.

Brand	Nilight
Country of Origin	China
Item Dimensions LxWxH	8 x 7 x 2 inches
Item model number	50026R
Item Weight	0.88 Pounds
Manufacturer	Nilight
Material	Alloy Steel, Brass, Rubber
Product Dimensions	8 x 7 x 2 inches; 14.08 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Dave L.

Very impressed so far, especially for the price.

Have only had it for a week, but tested it out on several tires/valves and it locks on very easily and have 0 trouble getting a leak-free seal without even trying. Hardly any air escapes when attaching or detaching, which is more than I can say for the standard type chucks. The gauge responds very quickly and not having to hold the chuck in place on the stem is so much easier. Trigger and release valves both work smoothly and let you control the amount of flow easily. Overall very sturdy feeling. The weak point on any of these is where the rubber hose crimps to the metal fittings, we'll see how that holds up over time (probably best to not leave it connected and under pressure all the time, but that applies to any air hose). The rubber itself will eventually crack if you leave it out in the cold or direct sun, but probably not for many years. Actually they should sell a replacement hose/chuck assembly, I would have bought an extra just to have it. My old Husky one from Home Depot has had cracking rubber for years, the inside has a reinforced woven section and it does not leak, so that has been cosmetic only, I'm assuming this one (like any rubber air hose) is probably of similar construction, we'll see. I don't have a perfect reference gauge that I can compare to, but I have an old digital gauge, and both my cars have TPMS. I tested on my car that has been sitting (air in the tires was at a stable room temperature so no pressure fluctuation between readings. After running the built in calibration on my old digital gauge, it read 29.8 and 29.9 on my rear tires. This Nilight read 30.6 and 30.7. The TPMS in my car (which does not give decimal places) read 31, which means it is somewhere between 30.5 and 31.4. So as far as I'm concerned the Nilight is right within the accuracy range it advertises and more accurate than my old digital gauge. It also reads much faster than the old one and is far easier to see the readout. I also tested using a couple traditional pen testers and both showed between 30 and 32 (can't really get more accurate than that with those). I then bled both tires with the nilight to 30.0 and after backing out of the driveway (TPMS takes a minute to update) both tires changed to 30 in the car. So I'm confident in what is shown on the display. I'll do the same test on my truck next which runs 80 psi in the rear tires, see if I get similar results at the higher pressure, but no reason to think it won't do well there either. I'll also have to see if I can track down something with very low pressure and try with that too, but since I rarely need to fill anything less than my 20 psi wheelbarrow tire, not really all that concerned with whether it is spot on at 5-10 PSI or not. Got it for $18 and at that price it is a great value. Even at $25 to $30 would be very happy with it. It comes with the Industrial type air fitting pre-installed. So if you have an industrial or universal female coupler, you're good to go right out of the box. I found it to be leak free right out of the box (it uses an O ring instead of thread seal tape, and includes a couple extra O rings). It includes a large spool of teflon tape, I guess in case you need to switch it over to an automotive style fitting. Threads are standard 1/4 NPT so swapping the coupling is easy, though the O-ring seems designed for the included coupling and may not work well with others, hence the teflon tape being included I'm assuming. Also includes a valve stem core removal tool, and 4 stem caps (no cores though). I already have several core tools and cores from various tire repair kits, and honestly have never had to replace a core in my life, but can't hurt to have them around. The caps are always handy to have though, nice of them to toss those in as you never seem to have one when you need it. Couple generic AAA batteries included as well (not Panasonic as shown in the picture, but no big deal). On the topic of batteries, you'll notice that most low drain devices (this, TV remotes, etc) come with NON alkaline batteries. That is because Alkaline batteries, when not used enough, will leak, regardless of what brand they are. They also have a tendency to leak really bad when they are dead. If you do use alkaline batteries in this, remove them if you won't be using it for a while. But better to just buy a pack of Carbon Zinc (non alkaline) batteries for use in all your low drain devices (remote controls, etc). Will save you headache in the future. You can get no-name brands cheap at the dollar store or harbor freight and even some grocery stores, and generally they are perfectly fine quality, but you can find Panasonic Carbon Zinc batteries (called Super Heavy Duty) on Amazon and other places and I'd trust those a bit more. They last a really long time in remote controls etc and are far less likely to leak (still make sure you replace them when they die though as that's when any battery tends to leak badly). Rayovac and Eveready make them too, quality wise those are in between the no name like Sunbeam and the Panasonic.

Scritto da: Monroe

Good design bad chuck

Everything about my item, but the locking chuck met expectations. Triggers worked great. Easy to read display, and it goes down to 0.1 instead of 0.5. However when the chuck was on the tire it either let the air out or read 0.0 because it wasn't fully engaging. Afterwards I noticed the clamp sites offset and probably caused the bad connection. The display also blurs when buttons are pressed (though it doesn't affect usage it just shows lack of quality). All in all 4 stars for 90% of the product and an easy refund. I might have just received a defective unit, but i am going with a different unit and different chuck right now.

Scritto da: TA

Almost perfect

I’m on my second tire gauge. For the price, it’s excellent. All of these gauges use the same lock on thumb latch. They don’t stay on by themselves! You have to hold them on for a full connection. Awkward but workable!

Scritto da: Amazon Customer

Always something

Everything works only problem is can’t read the pressure gage while airing up tire and leaks air. Other than that. Works great.

Scritto da: Vision Hive LLC

Works but seals are leaky and tire attachment is jaggy

Shouldn't need plumbers tape for a good quick-connect air seal, the whole point is that it should be quick... The attachment is jagged. You may scratch your rims if you aren't careful. Otherwise it works, and is usable.

Scritto da: German De Laire

Muy buen producto buena calidad

La utilizo para medir presión de llantas.

Scritto da: Aj

Should have bought one sooner

As the title says, I'm not sure why I waited so long to invest in one of these. I've been staring at a low pressure light on my Jeep since the weather shifted a couple months ago, and as easy as it is, filling up is a process I usually dread. This, coupled with my harbor freight compressor had all 4 tires done in under 5 min (not including filling the air tank). Not having to stop filling and check psi with a separate crappy hand held gauge was the best part; I only wish I had more tires to do! The unit feels good in hand, and I'm confident that it will hold up well. Nothing leaks and the gauge seems to be accurate. Will report back if it does not hold up well. As of now though, I would confidently recommend this product.

Scritto da: jose a martinez

Scritto da: aurel dumitrescu

Made in China

Came on time made in china the chuck is very strong hope is going to last.

Scritto da: David

It I a good replacement for what I had

Product was exactly what I needed

Scritto da: ARMANDO RUSA

La mejor pistola para llenar aire.

Me gustó mucho esta inflador de llantas, es muy bueno y quiero relatar mi experiencia. Yo lo utilizo mucho para presiones 35 a 45 PSI y no me ha fallado, unas veces lo e ocupado a 100 PSI y la punta agarra muy bien y la lectura en el manómetro también es muy buena. Me gusta que en cuanto metes la pistola, detecta la presión de la llanta y te lo da. También cuando te excedes en ves de quitar el conector y sacar el aire, en la pistola incluye una válvula de alivio y es muy bueno. Mi crítica es que esta pistola es muy buena incluso incluye un pieza para limpiar las entradas de las llantas. Funciona muy bien y está excelente todo.

Scritto da: nrqsnchz

LLegó descalibrado

Me llegó descalibrado y lo voy a tener que devolver. Marca 3.5 PSI al encenderlo, cuando que debería marcar 0.0. Por lo demás se ve de buena calidad.

Scritto da: Karina Simón

Excelente compra

Funciona perfectamente. Tal cual se muestra la información es lo que recibes. Hice comparación con otros medidores y es muy exacto.