Milescraft 1201 Piastra di base/set di boccole per fresatrici medie

Name: Milescraft 1201 Piastra di base/set di boccole per fresatrici medie
Brand: Milescraft
SKU: 730337086780
Price: 45.49 EUR
Availability: InStock

Brand:Milescraft

3.4/5

€
45.49

DESCRIZIONE DEL PRODOTTO Guida veloce senza attrezzi Scambi di boccole su qualsiasi router. Si adatta alla maggior parte dei router (incluso 3HP). installare e rimuovere le boccole di guida Turn Lock senza attrezzi. Installa e rimuovi gli allegati del router Turn Lock senza strumenti. DAL PRODUTTORE Il set di piastre di base / boccole Milescraft 1201 per router, con tecnologia TurnLock, sarà l'ultima piastra di base che installerai mai sul tuo router. Dotato di boccole di guida rapide senza attrezzi e scambi di attacchi per router, i progetti di router sono appena diventati un po 'più veloci e molto più semplici. Installa la piastra di base una volta utilizzando il perno di centraggio incluso e sarai in grado di sostituire le boccole di guida in pochi secondi. Ottimo per modelli e applicazioni di giunzione. Facile come cambiare le boccole di guida, anche la base TurnLock Offset e la guida circolare/bordo possono essere fissate e rimosse dalla piastra di base in pochi secondi. Il kit include un adattatore superiore per convertire le boccole metalliche standard in boccole a cambio rapido TurnLock. Include boccole con diametro esterno di dimensioni comuni: 5/16 pollici, 3/8 pollici, 7/16 pollici, naso esteso 7/16 pollici, naso esteso 1/2 pollici, 5/8 pollici, 5/8 pollici e 51/64 pollici.

Quantity

Aggiungi al carrello Compra subito

EAN: 730337086780

Categories: Strumenti e miglioramento della casa, Utensili elettrici e manuali, Parti e accessori per utensili elettrici, Parti e accessori del router, Modelli,

Fare riferimento al manuale del prodotto per la pettinabilità del router. BasePlate in policarbonato resistente può essere modificato con un trapano o un file per adattarsi a router non standard. Include un adattatore per cappello superiore per convertire altre boccole metalliche in boccole a cambio rapido turn-n-lock. Include 8 misure comuni di boccole: 5/16", 3/8", 7/16". Punta estesa da 1/2, 5/8", 51/64" e 7/16" e 5/8". La tecnologia turn-n-lock offre una guida rapida senza attrezzi per la sostituzione delle boccole sulla maggior parte dei router. Le boccole di guida durevoli mantengono un allineamento coerente con qualsiasi forma del modello di fresatrice.

Batteries Included?	‎No
Batteries Required?	‎No
Color	‎As Shown in the Picture
Country of Origin	‎China
Customer Reviews	4.3 4.3 out of 5 stars 643 ratings 4.3 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎Milescraft 1201 Base Plate/Bushing Set for Routers
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎1201
Item Package Quantity	‎1
Item Weight	‎0.3 ounces
Manufacturer	‎Milescraft Inc.
Material	‎Brass
Part Number	‎1201
Size	‎Medium
Style	‎Durable
Warranty Description	‎3 year limited warranty. Milescraft will at its option, repair, or replace without charge, any defects due to faulty materials or workmanship for three years from the date of purchase.

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Rick D.

Very good adapter for plunge routing

My old plunge router bushings weren't working it any more. I needed a new set. With the supplied centering tool, this went on to my Skil router easily and worked great.

Scritto da: T. Dempsey

nearly a perfect router upgrade

I've got a fairly old Ryobi router that came with a router table. I've used it a LOT. recently decided I wanted to try my hand at Dovetail joints and bought a jig for that purpose. I just needed a guide bushing to make it work right. I felt fortunate that this would fit my old router and do the job. the only thing I don't like about it is there is only 3 of the 4 screws holding it to my router's base. also, I can't just install and leave it in place as the adjustment for the bit height while in it's router table is blocked off. still, it works as it's designed and does what I needed.

Scritto da: Penny Watson

Works great.

This allowed my regular router to be used as a pattern router. It fit my router perfectly and performed very well. I would recommend this base plate.

Scritto da: Robb

Great value and solved my problem

I modified the base to fit my small hand router. The plastic base was easy to cut on the band saw. Since I'm using it for cutting F Holes in cigar box guitars, it worked out perfect.

Scritto da: mitchell le

Not the easiest to use or to figure out.

This is not the easiest one to install and to figure out how to use. But it does fit.

Scritto da: ~ƒ

Good for a Starter kit if you do not have a good router plate

Couple things Pro- The unit comes with the base plate so if you do not have a base plate that can accept a 1 3/16 insert to run router collars this will work. The inserts came with a "Tested" for snugness. The reason for that? (See Pic) of an older one I've been using and this is actually my second one. I gave them the benefit of the doubt that I had not SET the insert in FULL lock position, but I DID after checking the 1/2" collar insert into the new base. So that cost me a bit. Which brings me to the Cons Con- The unit has some that have shorter collars than others. IE., 7/16 collar is short enough for a dove tail jig. However if you are using a Harbor Freight Dovetail jig you will want to run the 1/2" collar set at 1/2 deep, using a 14º 1/2" Dovetail bit, preferably a 30.00 One. (See Pic) I ended up having to grind down the collar to clear the stock so the bit can route. The Base Plate has been re cut to now be almost Too Snug to accept the inserts/collars. Really snug. Like Monkey Grip hands to get it out. I am gonna give the brass ones (generic) a shot next round. They thread into the 1 3/16 insert that this plate does come with. The Base plate is 6" across/wide.

Scritto da: Harry Beals

Easy to install

Great product,recommend it

Scritto da: Andrew Levan

Takes Time

I bought this for sign making. Took me about 30 minutes to figure out the right configuration but it worked well. I have the Milwaukee Fuel compact router (which is not on their list). You have to put the large router plate on, and it needs to be offset, only two screw holes will line up. Then I needed my own small screws and nuts to secure the Milescraft baseplate to the large router plate. I think it was grooves B and H. I was pretty disappointed in how the router letters came out but I think that was just the font of the letters I got. I ended up setting up lots of tees and clamps to make my letters.

Scritto da: S.J.Cook

Good!

These are to replace one that I destroyed earlier that same week.

Scritto da: Dale

Happy

Sadly this does not fit my Makita emulation (katsu) palm router, or some modification will be required. But I do like the way it works and fits together with a satisfying snap leaving no excess wiggle

Scritto da: colin wilson

It takes katsu bushes as well !!!

Great with the added multi bush fitment for all bushes for routers.

Scritto da: Graham Coxon

Good Product

Good product good price

Scritto da: Daveyboy

1251 base plate

ordered off amazon arived very prompt, good value for money if your only using for light workshop work. I have looked at more expensive makes but for the ammount of use I need this item is perfect, already used quite a lot it is quick and easy to set up and use. dont know how long it will last but at this price I would buy another replacement without hesitation!