Genesis GBS321A Levigatrice a nastro a leva singola 3" x 21" a velocitÃ variabile con impugnatura anteriore regolabile e sacco di raccolta polvere, grigio

Brand:Genesis

3.1/5

€
126.44

La levigatrice a nastro da 3 x 21 pollici di Genesis, modello GBS321A, combina potenza e versatilità con caratteristiche di facilità d'uso e meno rumore per una rimozione rapida ed efficiente delle scorte. È progettato per falegnami, carpentieri, produttori di mobili, installatori di pavimenti, costruttori di ponti e appaltatori generali che richiedono un'eccellente levigatrice a nastro con risultati prevedibili. Il GBS321A è dotato di un potente motore da 8,0 AMP con controllo elettronico della velocità per garantire una velocità costante sotto carico. Il quadrante di controllo della velocità variabile consente all'utente di adattare la velocità (390-1.180 piedi/min.) all'applicazione desiderata.- Sistema di cintura di tracciamento automatico che segue la cintura senza regolazione e una maniglia anteriore regolabile per un funzionamento e un controllo confortevoli.- Il design a basso profilo offre un equilibrio incredibile e consente di entrare in punti e angoli stretti. progettato per la lavorazione del legno e l'ebanisteria ed è perfetto per levigare pannelli di legno, mobili, armadi e altro ancora. Aggiungi oggi stesso la levigatrice a nastro Genesis GBS321A alla tua collezione di utensili!

Quantity

Aggiungi al carrello Compra subito

EAN: 0891365000077

Categories: Strumenti e miglioramento della casa, Utensili elettrici e manuali, Utensili elettrici, Sanders, Levigatrici a nastro,

CALIFORNIA PROPOSITION 65 AVVERTENZA: cancro e danno riproduttivo. ACCESSORI – Include sacchetto per la polvere e un (1) nastro abrasivo

Amperage Capacity	8 Amps
Amperage Capacity	‎8 Amps
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Genesis
Brand	‎Genesis
Color	‎Grey
Cord Length	‎6.5 Feet
Country of Origin	‎China
Customer Reviews	4.0 4.0 out of 5 stars 342 ratings 4.0 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Grit Number	‎80
Grit Type	Coarse
Grit Type	‎Coarse
Included Components	‎bare-tool
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	14 x 5.75 x 5.75 inches
Item Dimensions LxWxH	‎14 x 5.75 x 5.75 inches
Item model number	‎GBS321A
Item Package Quantity	‎1
Item Weight	‎7.8 Pounds
Manufacturer	‎Genesis
Maximum Rotational Speed	‎18000 RPM
Number of Handles	‎1
Part Number	‎GBS321A
Power Source	Corded Electric
Power Source	‎Corded Electric
Product Dimensions	‎14 x 5.75 x 5.75 inches
Warranty Description	‎Backed by the Genesis 2 Year Manufacturer Warranty with US-Based Customer Support

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Moszis

Scritto da: Staytrue

excellent tool

excellent tool, fast shipping and great bang for your buck

Scritto da: Cliff

Good solid unit

When sanding metal and wood, you can adjust your speed very nice. seems like I've had mine over a year and no problems. had to jury rig a dust catcher. I would buy again .

Scritto da: Swayy

Like most others

Sander works well, this is 3rd sander I have owned. The dust bag is the absolute cheapest and most flimsy bag I have ever seen. Like most others, it broke and tore away, although that didn't matter since dust went right through it away. I purchased elastic top shop vac motor filer bag from HF, and used in place of dust bag. Works tremendously better, although the suction ob this machine is not good. Most dust comes straight out from under belt. However, any sander generates plenty of dust, so I can live with that. I have sanded approx 600 sq feet of hardwood floors with this. At one point it began to not start when pulling switch. Checked brushes, and so must dust had collected inside, it was blocking brush to motor contact. Cleaned out dust--solved the problem.On Genesis website, sent message inquiring about replacement brushes, 2 weeks so far, and no response. Belt breaking..solved by slowing speed to about 2/3 of maximum, made belt last much much longer. Cheapest belts from Amazon, and HF work as well as Diablo or any other brand of belts. Also take a short break every 15 minutes to let belt cool off. Hope I don't need warranty service since Genesis is so far ignored my brush inquiry, doubt they would response to warranty work either. Machine is good, no belt alignment problems, as that is usually only an issue on all machines when you move sander sideways perpendicular against belt rotation direction. UPDATE 6/1/17--still no response from Genesis on brush question, also called, no answers.

Scritto da: Jeff Ballard

Spot on.

I needed a solid belt sander for one medium-sized project and several smaller occasional projects and didn't want to spend big money; but also needed a reliable sander with good power. After reading many reviews, the Genesis was one sander that consistently came up as above average. I just spent a long weekend sanding over 200 board feet of redwood, I am very impressed with the Genesis belt sander. It performed exactly as expected; never bogged down or overheated and provided excellent results. The belts were easy to change, the dust bag was a good size and didn't fall apart and power was good (after using this unit I would never go with anything less an 8 amp sander). Only 2 wishes- I wish I could see where the belt was a bit easier; and I wish the RPM adjustment went higher as I could have used faster sanding in some places. Comparing this $54 sander to a $169 Porter Cable- the Porter Cable is way better, but definitely not 3 times better. I can't think of a better budget belt sander than the Genesis.

Scritto da: P Gleason

Good for the price but be ready for dust

I have only used two belt sanders, this one and a high end 4 inch sander that I borrowed. As one might expect the high end sander was much superior but I was pleasantly surprised that this sander was not so inferior that I was disappointed. For the price and the fact that I don't often need such a sander, this one is definitely good for me. My first serous use was on the seat of an oak bench that I was making for my bedroom. I was making the bench using wood I had sliced from a log from a tree that had died on my property. The seat was composed of several pieces that I had glued together. There was a significant amount of sanding needed to correct unevenness between pieces and to level out the combined section. This sander did a great job. It took more time that it would have if I had had access to the one I previously had borrowed. But the end result was just as good. My one complaint is the dust bag. As I believe others have mentioned, it is not dust proof. It does catch some dust but a very large percentage goes right through. So if you buy one be prepared to use a dust mask or (what I did) have a fan poised to blow the dust away from you.

Scritto da: Edward D Neel

Great value and very durable

I bought mine in May of 2016 and last night it had a bearing go bad. That's 4 years of fairly heavy use by me - i build barn wood furniture as a side hustle. I contacted their customer service this morning explaining what I thought was wrong and included a short video, they responded to me within an hour and a half confirming that I would need a replacement. Thumbs up on the quick response. I would give this 4 1/2 stars if it were an option. The only other issue I had was the drive belt broke earlier this year. I was able to replace it for about $10. I just ordered a replacement that will be here early next week and if I get 4 more years use out of that one, it will again be worth the $60.

Scritto da: BillyNTX

Great value but has quirks.

First, the PROS....easy to install belts and they stay aligned. Adjustable handle is nice. Price for a 3x21 model is sweet. Now the CONS....the weasel electrical cord is poorly placed. Genesis could have given it a kick stand on the back to prevent the belt from sucking it up. Trust me. They could have made the cord stiffer to allow it to move with the direction of the sander. I taped a metal clothes hanger to mine to it would move away from the sander. The dust bag and ventilation is very poor. Filled up first time and jammed after that...so after a short period of use, I blow it out with my wet vac. So wear a mask and ditch the bag. BTW, not sure if this model has an overheat sensor but the power will regulate if overheats...at least mine does. The small guard on the front of the sander could have been longer to act as a real guard and should be easy to flip up if you need to. It does neither. Lastly, toss the 16 gauge orange extension cord that you buy at home depot for $10 for a mile of it. This sander draws power and melted my cord. Step up to the Husky 14 gauge (red) to do the job.

Scritto da: Clayton.

Belt can slip.????

The belt drive wheel is not as wide as the belt so if you put pressure on the sander, the sand belt will slip and the inside will get polished and eventually become unusable. An efficient 6 amp motor can be stronger than an inefficient 8 amp, so be careful! This one seems to be good. Just as noisy as all the rest.

Scritto da: Loma

Quality Construction

Have only used this sander for one job (removing old finish from outside deck), but have to say that it feels like a well built tool. The weight and balance are much better than my old B&D sander, the tracking is excellent and the controls are well placed. Can’t comment on the durability but it has a substantial feeling that augers well.

Scritto da: jimmy brière

Qualité supérieure

Après seulement deux heures d'utilisation la courroie d'entraînement à cassée. Fonctionnait bien jusqu'à ce moment là, en attente d'un remplacement. J'espère que l'autre sera plus durable. J'ai reçu le remplacement, jusqu'à maintenant fonctionne très bien. Pas mal de puissance pour tous les travaux.

Scritto da: Travis W.

Great tool for the price point.

Really happy with this - I chose this over the Makita I was more familiar with, as a belt sander doesn't get a lot of use in my shop, and thus didn't warrant spending more than I had to. This sander has worked great so far, in the couple of hours I have used it I have found it to be well made and ergonomic. I appreciated the light weight, but I wouldn't try refinishing any hardwood floors with it.

Scritto da: Digital Island

The Genesis is an excellent belt sander for the price

The Genesis is an excellent belt sander for the price. Made in the USA it is well made and looks like it will last a good while. The belt sandpaper that came with it has held up well while I was making 2 canoe paddles so I suspect that the Aleko belts that were ordered as an add on will do the job quite nicely as well. This sander has a 2 year warranty but should last a lot longer. The adjustments are easy to use and the belt tracks well.