Extreme Max 5600.3211 Cavalletto di sollevamento anteriore e posteriore per motocicletta sportiva, adatto per la maggior parte di Yamaha, Honda, Kawasaki, Suzuki, Ducati, BMW

Brand:‎Extreme Max

3.2/5

160.20

Sollevare la tua moto sportiva per la manutenzione o lo stoccaggio è più facile che mai con il cavalletto di sollevamento anteriore e posteriore per moto Sport Bike di Extreme Max Products. Composto da due singoli sollevatori che funzionano separatamente o come un'unità, il supporto di sollevamento anteriore si annida sotto le forcelle della ruota anteriore, imbottito con imbottitura in gomma che non graffia le forcelle, mentre il supporto di sollevamento posteriore culla le bobine del braccio oscillante a doppio lato (non incluse), sollevando la bicicletta da terra e nella posizione perfetta per la manutenzione, la riparazione o il rimessaggio. Ogni supporto presenta una sostanziale regolazione della larghezza, creando una vestibilità personalizzata per quasi tutte le bici sportive; la larghezza della forcella di montaggio anteriore si espande da 9,5 a 12,5 mentre l'attacco della bobina posteriore si apre da 10,75 a 13,5. Come forse la sua migliore caratteristica, i cavalletti sono incredibilmente facili da usare. Una volta che conosci la misura della larghezza delle tue forchette e bobine, blocca i supporti nella larghezza corrispondente. Da lì, sposta i supporti in posizione e abbassa semplicemente la maniglia per un sollevamento piacevole e fluido. La maniglia diventa quindi la base del supporto, abbastanza larga da mantenere la stabilità e abbastanza forte da non abbassarsi mai. Nota: le bobine del braccio oscillante sono necessarie per l'uso con il cavalletto di sollevamento posteriore e non sono incluse. Extreme Max consiglia di fissare tutte le biciclette ai cavalletti con cinghie mentre vengono sollevate come misura di sicurezza aggiuntiva.

Le bobine del braccio oscillante sono necessarie per l'uso con il cavalletto di sollevamento posteriore e non sono incluse; Non compatibile con bracci oscillanti monobraccio. Completo di finitura verniciata a polvere nera e dotato di quattro ruote girevoli su ciascun supporto per un maggiore supporto e facilità d'uso. Il cavalletto di sollevamento posteriore si adatta alle bobine del forcellone posteriore della bici sportiva da 10,75 a 13,5 di larghezza. Il cavalletto di sollevamento anteriore si adatta a forcelle per ruote di bici sportive da 9,5 a 12,5 di larghezza e contiene un'imbottitura in gomma per evitare graffi e rigature - Si adatta a un'altezza massima della forcella di 13. Solleva una o entrambe le ruote della tua bici sportiva da terra in modo rapido e semplice per la manutenzione, la riparazione o lo stoccaggio.
Brand ‎Extreme Max
Country of Origin ‎China
Customer Reviews 4.1 4.1 out of 5 stars 886 ratings 4.1 out of 5 stars
Item model number ‎5600.3211
Item Weight ‎17 pounds
Manufacturer ‎Extreme Max
Manufacturer Part Number ‎5600.3211
Model ‎5600.3211
Product Dimensions ‎20.75 x 18.5 x 4 inches

3.2

13 Review
5 Star
58
4 Star
15
3 Star
15
2 Star
4
1 Star
8

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Nicholas N, Barros
Don’t expect $600 quality for $100
Okay first things first, they work fine! They do the job which for me was to swap tires on my 2019 Indian FTR. Don’t expect the fit and finish of these to be anything like a $400-$600 set, it’s just not realistic. If your expecting that, you’re going to be disappointed. They are a little off on the front but with the weight of your bike it will be fine. I wouldn’t trust storing my bike on them 24/7 but for $100 they are a good deal! The comments here complaining about misaligned pieces are just asking too much for to little. If you seriously expect a sub $100 stand to perform the same as the big brands, you’re trippin! Manual is pretty useless but it comes with 4 bolds and 6 frame pieces and 4 frame rests, it’s not that complicated. If you can’t put this together then you probably shouldn’t be working on your own bike, take it to a mechanic. Worth the buy if you’d rather spend your money on performance upgrades then stands.
Scritto da: gabe padilla
Balling on a budget.
Let's start with the dislikes. The front is perfect nothing wrong with it from my point. The rear is my issue. I set the stands up perfectly square and on my bike 05cbr1k it was not wide enough for the rear spools. I had to spread the stand apart a little to get it to seat well. So take it with a grain of salt. Otherwise! AMAZING VALUE! The stands are easy to build and set up. My favorite part is the ease of lifting. Some stands you have to put alot of pressure behind and sometimes they just never feel sturdy these lift the bike with ease and feel confident going up and down. Would definitely buy again
Scritto da: Rob Davis
Decent for the price
Some assembly required. The bottom sections fit fairly easily to the upper handle, but they are loose, and you really have to tighten up the bolts that hold them together to make them feel sturdy. They worked well for what I needed them for, and are less expensive than other sets which made them more appealing to me.
Scritto da: Amazon Customer
Absolute Steal ????????
The media could not be loaded. I love it. Super easy to put together if you have a brain lol. Front are off a tab but still fits up great.
Scritto da: Ian B.
Product is very flimsy
The stand is very narrow , it bends easily , the bike does not feel stable on it and if you were to put any weight on the bike I feel it would collapse. I wouldnt trust it to sit on the stand.
Scritto da: Bayle Duncan
Barely fits my 2016 gsxr750 but works
Bought these for my 2016 gsxr750. Assembly was pretty easy and straight forward. When fitting them into the bike, they are pretty narrow may have to do light bending to make fit better but they definitely work props both ends up and fairly sturdy. It’s sturdy enough to do some maintenance but I wouldn’t sit on it the way it sits without minor adjustments to the tubes. Overall for the price, it’s worth the money but later down the road will want some better quality ones but this will do.
Scritto da: Michael
Great Product and Customer Service!
I purchased these stands for storage and maintenance and they are great! Initially I was only sent the front stand, but when I contacted the seller they promptly sent me the missing rear stand. Things happen, but a great company is judged by how they respond and take care of customers. Highly recommend!!
Scritto da: Bryan
Lazy construction
It’s a $70 dual stand, so I get that it’s what I paid for. But they completely forgot to drill the holes on my front right stand as seen in picture.
Scritto da: Steven B.
Does what it needs to do
Great product, sturdy enough to support a bike for storage or too do minor work on but don’t attempt to sit on the bike while it’s up on stands. Good value for the money.
Scritto da: Citizen1130
Not the best, but not the worst
The product came in with a broken piece. Since the part wasn’t crucial to the integrity of the frame I decided to keep it. The wheels aren’t the sturdiest but for the price I paid it’s a decent assembly. Overall ok product for the price.
Scritto da: Rob deCarle
Does a nice job
The product arrived quickly and seemed to be well packaged. Instructions were available and pretty easy to assemble. If you tighten the bolts properly, the stands seem to be very solid. I installed both the rear and front stands on my R3 and it seems pretty stable.
Scritto da: Amazon Customer
Works great
Easy to assemble. Bike is very sturdy on them!
Scritto da: RP
Works but...
Needed to change the tires on my 07 Suzuki DL650 so I ordered this. It arrived slightly bent and with a couple of broken plastic parts. The product was pretty obviously returned by someone. The vendor should have checked the items before sending it again to another customer. Being in a bit of a hurry to change my tires I just bent the tube back to somewhat normal and didn't use the non-essential plastic parts. The product is made of tube, doesn't feel extremely solid, but I was able to lift the rear of my bike without a problem. The fitting of the rear lifter did not match my bike exactly, but I turned the fitting around and the fork then rested on the bolts. Bottom line, it does the job. Could be a little more solid. Vendor should not do what it did. I'd have sent it back was I not in a hurry to change my tires.

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart