Enerlites MPC-52V Sensore PIR da soffitto, sensore di presenza a soffitto, sensore di luce a soffitto, sensore di presenza, grado commerciale FOV a 360 gradi, 800 mq. Copertura Ft, 120-277 V CA, bianco

Name: Enerlites MPC-52V Sensore PIR da soffitto, sensore di presenza a soffitto, sensore di luce a soffitto, sensore di presenza, grado commerciale FOV a 360 gradi, 800 mq. Copertura Ft, 120-277 V CA, bianco
Brand: ENERLITES
SKU: 0883951414733
Price: 69.73 EUR
Availability: InStock

Brand:ENERLITES

3.2/5

€
69.73

Sensore di presenza per montaggio a soffitto a infrarossi passivi a 360 gradi di grado commerciale con rilevamento del movimento. L'interruttore del sensore a soffitto accende e spegne automaticamente le luci quando viene rilevato un movimento. Risparmia sulle bollette energetiche installando Enerlites MPC-52V poiché il tempo di installazione si riduce da 45 minuti a 10 minuti. Per questo prodotto non è necessaria alcuna scatola da soffitto. Include due obiettivi gratuiti di cui uno per una portata più ravvicinata più sensibile al movimento e uno per una portata più lunga con minore sensibilità. Per installare questa plafoniera con sensore di presenza, è sufficiente praticare un foro nel soffitto con il cacciavite, inserire la piastra posteriore nel foro, quindi far passare i fili e collegare. La lampada da soffitto è ideale per uso aziendale o commerciale ai fini della comodità, dell'efficienza energetica, della sicurezza e della sorveglianza. Personalizzazione: • Tempo di ritardo regolabile: 15 sec. - 30 minuti. • Regolazione della sensibilità: 50% / 100% Specifiche: • Lente di Fresnel multilivello a 360° per un rilevamento di presenza superiore • Copertura: campo visivo a 360°; 800 piedi quadrati di copertura • Temperatura operativa: da 0° a 55°C (da 32° a 131°F) • Incandescente 800 W a 120 V CA, 60 Hz • Fluorescente 800 VA 277 V CA, 60 Hz • Motore: 1/4 HP, 120 V CA, 60 Hz • Designazione filo: caldo, neutro, carico • Tecnologia a infrarossi passivi, sensore di movimento PIR • Controlli incand illuminazione fluorescente, CFL e LED. • Elencato UL

Quantity

Aggiungi al carrello Compra subito

EAN: 0883951414733

Categories: Strumenti e miglioramento della casa, Elettrico, Interruttori e dimmer, Interruttori a muro, Interruttori attivati dal movimento,

Il montaggio a soffitto del sensore di presenza è omologato UL, a incandescenza: 400 W a 120 V CA; Fluorescente: 800VA @120VAC, 1200VA @277VAC; Motore: 1/4 HP @120VAC. Temperatura di esercizio (32 – 131°F), non è necessaria alcuna scatola da soffitto. Lenti di Fresnel multilivello: il sensore a soffitto include due lenti intercambiabili per diversi livelli di sensibilità. Personalizza per ottenere i migliori risultati. Campo visivo completo a 360° Lente di Fresnel che copre fino a 800 piedi quadrati. Progettato per un'altezza del soffitto di circa 8-10 piedi. Grado commerciale, ideale per aziende e immobili commerciali. Il sensore di movimento a soffitto può essere collegato direttamente all'apparecchio o al soffitto per una facile installazione. Basta praticare un foro nel soffitto, quindi far passare il cablaggio, riducendo il tempo di installazione di 30 minuti. Il sensore di presenza per montaggio a soffitto utilizza la tecnologia a infrarossi passivi (pir) per accendere automaticamente le luci.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	ENERLITES
Brand	‎ENERLITES
Certification	‎UL
Color	White
Color	‎White
Customer Reviews	4.2 4.2 out of 5 stars 76 ratings 4.2 out of 5 stars
Included Components	‎MPC-52V
Is Discontinued By Manufacturer	‎No
Item model number	‎MPC-52V
Item Package Quantity	‎1
Item Weight	0.01 Ounces
Item Weight	‎0.01 Ounces
Manufacturer	‎Top Greener Inc
Maximum Range	10 Feet
Maximum Range	‎10 Feet
Mounting Type	‎Ceiling Mount
Part Number	‎MPC-52V
Power Source	Corded Electric
Power Source	‎Corded Electric
Product Dimensions	‎5.1 x 4.3 x 4.4 inches
Switch Style	‎Temperature Switch
Wattage	‎400 watts

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Circle C

Great Instructions

What impressed me the most was the completeness of the instructions and each wire was clearly marked in layman's terms. I also like that you don't have cut a 4" hole to install it. The unit has three main components. The base, the sensor and electronics, and the cover. I plan on ordering another one for my office which has the wall switch inconveniently placed behind one of the French doors making a switch mounted sensor unusable.

Scritto da: Casual Reviewer

Watch out for the lenses in the box

I installed it in a room with an 8ft ceiling and I had to walk almost directly below it for it to work. UPDATE after a couple hours of research.... Frustrated at the prospect of returning a device I just bought and installed, I began reading about passive infrared technology on my phone in the dark room I was trying to automatically light up. In my research I found an article mentioning how a fresnel lens (the jewel shaped lens on the cover) helps with the sensitivity of the devise because it divides the field of view into zones that the detector can monitor. I then remembered seeing when I unpacked the box, a spare lens inside and thought it odd for them so supply one. To try my luck, I took the lens that was mounted on the cover and compared it to the spare one and to my amazement saw that the interior face of the spare lens was much more textured. To try my luck I swapped them out and all my problems went away. The instructions do not make any mention of this so I am not sure if they indeed supply lenses with two sensitivities or whether one was defective. I give it 5 stars for working as advertised minus 1 for either poor documentation or providing defective lenses.

Scritto da: Robert L Klawuhn

Easy to install and works well.

It seems to be very sensitive. Maybe too much sensitivity for a small porch, even at the low setting. But it works great and was simple to install.

Scritto da: A. Adams

Failed in less than one week of actual use

Update: Failed just one day after my return window closed. At around 2AM in the morning it started turning on and off repeatedly without any trigger. One day later fails to register any motion. Will now have to follow up on the two year warranty but i'm not holding my breath... Typical passive infrared (PIR) occupancy sensor that is easy to set up and wire. Adjustable time settings are 15 seconds, 5 minutes, 10 minutes, 20 minutes, and 30 minutes. Really wish they had 1 minute as 15 seconds is too short and 5 minutes is much too long. Didn't test the ambient light settings that much (cool feature that won't turn on the lights if the sensor detects enough ambient light). Did change the sensitivity down to 50% (either 50 or 100% sensitivity). The kit included another lens and some pie shaped stickers so that you could 'blind' the sensor to certain unwanted triggers (IE sunlight, window, adjacent space, heater vent, etc). The wiring has a black (hot) neutral (white) and red that goes to the load. Underneath the cover they have two screw holes or you can use the threaded nut connection and washer to affix the stem on the backside through a material such as drywall or plywood. Conveniently the stem also has some thread for 1/2" flexible conduit so no adapter would be needed just in case the application required conduit. Literature lists a two-year warranty. Using this sensor in a walk-in closet for hands free activation and no worry automatic shut off.

Scritto da: Amazon User

Easy install.

So far so good. Turns on when you expect. I use it for a closet and the range is perfect. It has multiple time and light settings. Also includes tape pieces to mask from detecting unnecessary movment. I bought it because I could mount it without requiring additional install of junction box. Keep in mind you still need access to ceiling to tighten nut that holds it against drywall. So don't place too far from light fixture. Looks nice and clean.

Scritto da: Jeff

Excellent solution for ceiling sensor

This ceiling mounted infrared motion sensor works as described and is well made. Although it appears to be designed for suspended ceiling applications, I was able to install this in an existing sheetrock ceiling to control a ceiling fixture in a hallway. I used an old work ceiling box and a cover plate because the size of this sensor did not match with any old work box that I could find readily. This unit has been performing flawlessly for several weeks now. UL listing is a plus.

Scritto da: Fab.

works ok

But needs adjustment, change of the cap head depending of your configuration otherwise you need to be right under for it get triggered.

Scritto da: ronald rorick

works great

i use it for a bathroom and its work great

Scritto da: Cam Summerfeldt

Not a direct fit for standard ceiling boxes.

Great operation but not typical mounting style or size. Extra trim pieces will need to be made or purchased.