0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

Eagle Tool US EM50036 Punta da trapano per installatore, punta in metallo duro per applicazioni in muratura, 1/2 pollice per 36 pollici, prodotta negli Stati Uniti, nera 1/2 pollice 36 pollici.

Brand:Eagle Tool US

3.2/5

€
69.29

Punta per muratura con punta in carburo di alta qualità di Eagle Tool. È la soluzione migliore per le situazioni difficili. Questa punta viene fornita di serie con un'impugnatura antiscivolo a tre piatte, fori per l'alloggiamento del pesce nel trapano e il gambo flessibile in acciaio per molle. Funziona bene su blocchi di cemento, piastrelle, mattoni e la maggior parte degli altri prodotti in muratura. Diametro della testa da 1/2 pollice, diametro del gambo da 1/4 di pollice e lunghezza complessiva di 36 pollici.

Quantity
Aggiungi al carrelloCompra subito

EAN: 0850078004666

Categories: Strumenti e miglioramento della casa, Utensili elettrici e manuali, Parti e accessori per utensili elettrici, Parti e accessori per trapani elettrici, Punta del trapano, Punte da trapano per installatore,

Fabbricato negli Usa. Aggiungi un Quick Switch Hex per adattarlo a un mandrino a cambio rapido numero parte ETHXKIT250. Tre impugnature piatte antiscivolo sull'estremità del mandrino. Gambo flessibile in acciaio per molle con fori di alloggiamento per la pesca del filo nella testa e nel gambo. Punta per installazione punta in carburo.
Brand Eagle Tool US
Country of Origin USA
Cutting Diameter 0.5 Inches
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Item Dimensions LxWxH 36 x 0.5 x 0.5 inches
Item model number EM50036
Manufacturer Eagle Tool US
Material Carbide, steel, spring steel
Product Dimensions 36 x 0.5 x 0.5 inches; 9.6 Ounces
Shank Type Triangle

3.2

11 Review
5 Star
59
4 Star
19
3 Star
8
2 Star
7
1 Star
8

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Travis Milner
Important for remodeling.
This bit is one of those tool's you rarely need, and when you do, you need it now! I had to run new electrical wire in a cinder block wall from the attic, was a struggle. I tried various ways unsuccessfully I mite add. Before I found this bit. Was stiff enough to apply pressure yet flexible enough that I could get it where I needed in my short attic. Made short work of something that I fought for a week. Glad I have, price was great. Prompt delivery.
Scritto da: Jonny84
Great bit very handy
I needed to run a new receptacle over an existing fireplace which required drilling horizontally over the fireplace. This bit went through cinder block with ease. Also went through brick with a little more effort. I got the 1/4” shank which is great and does have a little flex but obviously not as much as a smaller shank. I have a wood drill bit with a 3/16” shank and that thing can make a 90degree bend and still drill a hole. You might be able to get a 45 degree angle with this 1/4” shank, maybe! But since I was drilling through brick I was glad I got the larger shank as it required a lot more forward pressure and a small shank would have been bending and flexing too much during drilling.
Scritto da: James Bushey
PAY ATTENTION: THIS IS A MASONRY BIT
As of this review, the title and specs do not indicate that it is a masonry bit. You can not interchange a masonry or a wood bit, period. Also, this is a good bit more rigid than it is flexible. A very good buy if you are needing to drill through masonry. They do mention the word masonry within the description and I do take responsibility for not checking closer.
Scritto da: D P
worked perfectly
as you would expect, this drills a hole thru a 2x4 and into a large gap area and in my case an open attic space to locate a hole. very useful
Scritto da: AT
Did the job for me
Was drilling all day. It did the job for me.
Scritto da: Rideonbikesand R.
Is it the bit or me?
I needed to drill a hole for an outdoor light fixture. The hole was to be frilled in a brick and mortar lamp standard about 4 foot tall. The bit worked good at first, then began to bog down. I was using a 1/2 hp hammer drill, which seemed to turn it ok but not great. The bit finally became stuck in the boring hole and was not removable. It broke in the hole leaving me without a bit and about a foot short of my goal. I don't know if it was the bit or my use of it because I have never attempted anything like this before.
Scritto da: Amazon Customer
Junk, Not sharp and quickly broke
Unlike most reviews I bought this to use for masonry holes. Unfortunately it was complete junk. I got one hole drilled and part way into the second hole it snapped clean off and was stuck in the cinder block. The bit does have a lot of flex so I kept the speed a little lower and a normal bit but it did a horrible job cutting into the block and then failed. Ended up being a waste of money for me and I can't even say I got good use out of it because I only had 4 holes to drill and it couldn't even complete the job. Wish I could return it and get my money back.
Scritto da: David
Works well for wire fishing seeker bit
Purchased to use for drilling into floor to fish wire up through crawl space. Plenty long enough to penetrate several layers of headers/subfloor, etc to find a route to fish wire.
Scritto da: Amazon Customer
Don't buy this item
Probably the lowest quality drill bit you could possibly find. Total garbage. Save your money.
Scritto da: Red Masters
Waste of my time
Your insistence upon a review
Scritto da: Roy Walters
Four Stars
looks like it well do the job for me

Prodotti correlati

hot
MAGBIT 786.18.0716 MAG786 Punta da trapano Bellhanger in acciaio ad alto tenore di carbonio da 7/16 pollici per 18 pollici
4.1/5

€ 40.60

MAGBIT 786.18.0716 MAG786 Punta da trapano Bellhanger in acciaio ad alto tenore di carbonio da 7/16 pollici per 18 pollici
4.1/5

€ 40.60

hot
BOSCH BH2003T 3/8 pollici x 18 pollici Bit di installazione
3.6/5

€ 27.06

BOSCH BH2003T 3/8 pollici x 18 pollici Bit di installazione
3.6/5

€ 27.06

hot
MAGBIT 728.1216 MAG728 Punta per legno da 3/4 pollici per 40 pollici
3.9/5

€ 181.64

MAGBIT 728.1216 MAG728 Punta per legno da 3/4 pollici per 40 pollici
3.9/5

€ 181.64

hot
Eagle Tool US ET37536 Punta da trapano per installatore, punta interruttore intercambiabile, punta a vite, 3/8 pollici per 36 pollici, prodotta negli Stati Uniti
2.9/5

€ 73.47

Eagle Tool US ET37536 Punta da trapano per installatore, punta interruttore intercambiabile, punta a vite, 3/8 pollici per 36 pollici, prodotta negli Stati Uniti
2.9/5

€ 73.47

hot
MAGBIT 786.24.0816 MAG786 1/2-Inch da 24-Inch Punta per trapano Bellhanger in acciaio ad alto tenore di carbonio
3.5/5

€ 60.11

MAGBIT 786.24.0816 MAG786 1/2-Inch da 24-Inch Punta per trapano Bellhanger in acciaio ad alto tenore di carbonio
3.5/5

€ 60.11

hot
BOSCH BH2001T 1/4 pollici x 18 pollici Bit di installazione
3.2/5

€ 29.63

BOSCH BH2001T 1/4 pollici x 18 pollici Bit di installazione
3.2/5

€ 29.63

hot
Eagle Tool US ET18721 Gambo punta trapano installatore, utilizzato con teste di punte intercambiabili, 3/16 pollici per 21 pollici, prodotto negli Stati Uniti 3/16 pollici 21 pollici.
3.9/5

€ 42.49

Eagle Tool US ET18721 Gambo punta trapano installatore, utilizzato con teste di punte intercambiabili, 3/16 pollici per 21 pollici, prodotto negli Stati Uniti 3/16 pollici 21 pollici.
3.9/5

€ 42.49

hot
Disston 4430 Xtreme punta quadrupla per vetro e piastrelle, 3/16"
3.5/5

€ 24.74

Disston 4430 Xtreme punta quadrupla per vetro e piastrelle, 3/16"
3.5/5

€ 24.74

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu