0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

Dixon DGH7 Raccordo ad innesto rapido in ottone, set completo di tubo da giardino, pressione 200 psi

Brand:Dixon Valve & Coupling

3.6/5

€
40.93

Questo gruppo completo di tubo da giardino a connessione rapida in ottone Dixon DGH7 ha una spina e un accoppiatore con estremità di connessione GHT e si collega alle connessioni filettate GHT. L'ottone è resistente alla corrosione, duttile alle alte temperature e ha una bassa permeabilità magnetica. Questo gruppo ha una pressione operativa massima (MWP) di 200 psi (13,61 bar) a 70 gradi F. L'accoppiatore ha una connessione filettata per tubo da giardino femmina (GHT) e un anello push-pull per il collegamento e lo scollegamento del tubo, mentre la spina ha una connessione GHT maschio. Questo gruppo è utilizzato in applicazioni idrauliche generali.SPECIFICHEConnessione estremità raccordoGHConnessione estremità femminaGHTMaterialeOttoneMassima pressione di esercizio200 psi (13,61 bar)I raccordi per tubi flessibili collegano, controllano, modificano la direzione e terminano il flusso nei sistemi di tubazioni e tubi flessibili. Sono realizzati in ottone, acciaio inossidabile, acciaio zincato e altri materiali resistenti alla corrosione, alla pressione e all'usura. I raccordi per tubi flessibili hanno vari tipi di connessioni, tra cui filettati, spinati, push-to-connect, disconnessione a secco e altri, inclusi quelli basati su specifiche accettate a livello internazionale. I raccordi per tubi flessibili sono utilizzati in sistemi come compressori d'aria, operazioni di produzione automatiche, controlli di aeromobili e installazione di pneumatici in settori quali agricoltura, miniere, costruzione di strade, antincendio e aviazione. Dixon Valve & Coupling Company produce raccordi e accessori per tubi e tubi flessibili. L'azienda, fondata nel 1916, ha sede a Chestertown, nel Maryland.

Prodotto non disponibile

EAN: 0355494673569

Categories: Patio, prato e giardino, Prodotti industriali e scientifici, Giardinaggio e cura del prato, Attrezzature per l'irrigazione, Connettori e accessori per tubi flessibili, Parti e connettori,

Precisione lavorata con anello push-pull per un attacco rapido del tubo. Ottone per resistenza alla corrosione, duttilità alle alte temperature e bassa permeabilità magnetica. La costruzione senza valvola consente il flusso quando è disconnessa. GHT maschio e GHT femmina sul raccordo portagomma. Gruppo completo di collegamento rapido filettato (GHT) per tubo da giardino che include un tappo e un accoppiatore per collegare i tubi alle connessioni GHT.
Brand Dixon Valve & Coupling
Color Brass
Country of Origin China
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer No
Item model number DGH7
Manufacturer Dixon Valve & Coupling
Material Brass
Maximum Pressure 200 Pound per Square Inch
Package Dimensions 2.36 x 1.81 x 1.46 inches; 3.53 Ounces

3.6

5 Review
5 Star
77
4 Star
8
3 Star
8
2 Star
2
1 Star
4

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: DmK
Solid, but vulnerable to drop damage; male connector knurled ring is a bit narrow
I have one of these connectors attached at the water spigot and one at the spray end of the hose. That second connector might and eventually will get dropped/dragged over concrete. I try to be careful, but this is just the reality if you unwind your hose over a concrete driveway. What prompted me to write this review was the fact that my previous quick-connects had a plastic rings around them that protected them from such damage. They had their own share of problems, and I like these Dixon's better, but I am missing those rings. They could also make attaching the male connector easier. Otherwise, it can be hard to grab the narrow knurled brass ring once the connector is threaded in. Now, to the good. These connectors are made of solid brass, they are not too bulky (ever tried quick connects by ELEY corporation?), and use special washers to seal the connection. While these washers are not as common as garden hose washers, they can still be purchased separately. My previous quick connects used o-rings instead of washers: good luck changing those once they start leaking! One thing I realized is that the male connectors from my previous quick connects still fit these. Great, I need more male connectors since I have some attached to and stored with different gizmos that can potentially be connected to the garden hose. Lastly, I will mention that if you are in the business of changing the attachments on your hose while the water is running, it may be worth it to get an inline shut-off valve to be installed at the spray end of the hose: this way there is no need to run back to the spigot to shut off the water. There some thumb controlled valves on Amazon that look promising.
Scritto da: 2A III
What's in a name?
I expected a higher quality disconnect from a brand name like Dixon. This piece felt like every other cheap import. The pressure washer quick disconnect set I bought from Lowe's had much higher material and construction qualities.
Scritto da: Amazon Customer
50% price increase in last 2 years
These were already the "premium" choice for hose quick connects, and they work great, possibly the best thing out there that's commonly available, but it's hard to forgive price gouging. Granted it's a small item, but I just checked my history and the price for these was holding steady for several years before increasing 50% over the last two years. Other websites have them for much less but then there's shipping...
Scritto da: M.C
Absolutely NO LEAK year after year
Edit: 5 yrs later one of the female fittings displays signs of misfitting/dripping. Upon close inspection I found the connector's special shaped (dual layers) rubber washer losing the seal. The replacement washer was an easy find and costs only a few cents. Search "500QCSG" from wink hose warehouse wink. Edit: Some may find it hard to disconnect the fitting -- release the water pressures before attempting to disconnect. Remember the connection is a tight seal. This is the real deal. I have purchased a few Dixon's fittings over the last 5 years. The first one installed outdoor under the California scourging sun/mild winter year after year. Every time it click-connects, it's a firm seal. Never a time should I be concerned about water dripping and wetting my pants/sleeves. In one of my setup it's connected to a heavy long-pole sprayer and no sweat. Just thinking I had wasted so much money on big-box stores' items that never last past winter. Be aware of also another cheaper knockoff fitting that looks the same to Dixon (full brass sold on Amazon but made in China. Yeah, lasted only for a summer - one leaked and another one cracked).
Scritto da: Andrew J. Camenga
Solid Construction. Once connected, no leaks or drips.
When this quick-connect arrived, I was fairly certain this was a good purchase. Having used it for five months, I'm convinced. * The metal is not flimsy, it is well constructed. * The male and female pieces fit together easily and come apart well. * Once everything has clicked into place, I've experienced no leaking. * The metal sleeve for connecting and disconnecting moves freely (when there is no pressure in the line). * Whether intended or not, there seems to be a safety feature: it is nearly impossible to disconnect when the line is under pressure. I have jury-rigged a system to make a portable dishwasher out of a cabinet based unit. For ease-of-use this required setting up a quick disconnect system for the water supply. The unit is connected and disconnected several times a week -- and sometimes two or three times in a day. I tried a variety of inexpensive and more expensive plastic quick disconnects. They either outright failed or developed slow leaks. This was not acceptable for a connector inside the house. So I decided to try a metal fitting and this one had good ratings. The one down-side for my use was the difficulty of disconnecting a line under pressure. After turning off the supply valve, the line between the dishwasher and supply was still pressurized -- so I could easily connect but not disconnect. I had to install an extra pressure release point in my connection system to make disconnecting work well. Having done that, I've been thrilled with this unit.

Prodotti correlati

hot
Orbit 58248 Adattatore rubinetto per tubo da giardino a doppia uscita in ottone, marrone 1
3.6/5

€ 29.76

Orbit 58248 Adattatore rubinetto per tubo da giardino a doppia uscita in ottone, marrone 1
3.6/5

€ 29.76

hot
Tubo in ottone Orbit Quick Connect Set Raccordo maschio
3.1/5

€ 25.34

Tubo in ottone Orbit Quick Connect Set Raccordo maschio
3.1/5

€ 25.34

hot
Valvola Midline S3538-5 Bibb per tubo sillcock con flangia sovradimensionata Ingresso FIP da 3/4" x uscita MHT, ottone cromato (confezione da 5), ​​3/4 3/4, 5 pezzi Confezione da 5 Ingresso FIP da 3/4" x 3/ Uscita tubo MHT da 4 pollici
3.6/5

€ 146.50

Valvola Midline S3538-5 Bibb per tubo sillcock con flangia sovradimensionata Ingresso FIP da 3/4" x uscita MHT, ottone cromato (confezione da 5), ​​3/4 3/4, 5 pezzi Confezione da 5 Ingresso FIP da 3/4" x 3/ Uscita tubo MHT da 4 pollici
3.6/5

€ 146.50

hot
Eastman Heavy-Pattern Maschio No-Kink Hose Bibb Valve, MIP Connection, Brass Plumbing Fitting 3/4 in. MIP
3.4/5

€ 36.20

Eastman Heavy-Pattern Maschio No-Kink Hose Bibb Valve, MIP Connection, Brass Plumbing Fitting 3/4 in. MIP
3.4/5

€ 36.20

hot
Gardena 36938 valvola a Y per tubo da giardino con connettore rapido
3.4/5

€ 45.63

Gardena 36938 valvola a Y per tubo da giardino con connettore rapido
3.4/5

€ 45.63

hot
EASTMAN 1/2 pollice FIP x 1/2 pollice MHT Valvola per tubo da giardino a naso piegato, raccordo idraulico in ottone, 20251 1/2 pollice x 1/2 pollice.
3.6/5

€ 28.81

EASTMAN 1/2 pollice FIP x 1/2 pollice MHT Valvola per tubo da giardino a naso piegato, raccordo idraulico in ottone, 20251 1/2 pollice x 1/2 pollice.
3.6/5

€ 28.81

hot
Jabsco 31911-0000 - Raccordo per tubo dell'acqua in acciaio inox per montaggio a filo marino con connettore per tubo (ingresso femmina da 1/2" NPT)
3.5/5

€ 140.81

Jabsco 31911-0000 - Raccordo per tubo dell'acqua in acciaio inox per montaggio a filo marino con connettore per tubo (ingresso femmina da 1/2" NPT)
3.5/5

€ 140.81

hot
Liberty Garden Products 125-Feet of 5/8-inch Tan Liberty 691-2 Base Tubo da giardino per montaggio a parete Butler-Holds 125-F Confezione da 1 gancio per tubo
3.7/5

€ 40.44

Liberty Garden Products 125-Feet of 5/8-inch Tan Liberty 691-2 Base Tubo da giardino per montaggio a parete Butler-Holds 125-F Confezione da 1 gancio per tubo
3.7/5

€ 40.44

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu