WORKSHOP Wet/Dry Vacs Vacuum Adapter WS25011A 2-1/2-Inch a 1-1/4-Inch Universal Shop Adattatore per Tubo Flessibile per Negozio Accessori per Vuoto

Name: WORKSHOP Wet/Dry Vacs Vacuum Adapter WS25011A 2-1/2-Inch a 1-1/4-Inch Universal Shop Adattatore per Tubo Flessibile per Negozio Accessori per Vuoto
Brand: WORKSHOP Wet/Dry Vacs
SKU: 0648846100319
Price: 27.93 EUR
Availability: InStock

Brand:WORKSHOP Wet/Dry Vacs

3.3/5

€
27.93

DESCRIZIONE DEL PRODOTTO Se disponi di accessori per aspirapolvere a secco umido da 1-1/4 pollici di diametro e un tubo flessibile da 2-1/2 pollici di diametro, questo adattatore per aspirapolvere a secco umido è proprio ciò di cui hai bisogno. Ottieni la manovrabilità degli accessori per il vuoto più piccoli quando ne hai bisogno ed essere comunque in grado di utilizzare il tubo da 2-1/2 pollici per i lavori più grandi. DAL PRODUTTORE Adatta il tubo aspirapolvere umido/secco 2-1/2 agli accessori 1-1/4. Il diametro 2-1/2 consente la raccolta di detriti più grandi, mentre gli accessori 1-1/4 offrono una maggiore versatilità.

Quantity

Aggiungi al carrello Compra subito

EAN: 0648846100319

Categories: Strumenti e miglioramento della casa, Utensili elettrici e manuali, Parti e accessori per utensili elettrici, Accessori per aspiratori e aspiratori, Parti per aspirapolvere e collettori di polveri,

Succhialo. Fallo. con WORKSHOP Wet Dry Vacs WS25011A l'adattatore per vuoto umido e secco aiuta a sfruttare maggiormente il vuoto del tuo negozio. Il miglior adattatore per vuoto umido e secco per la tua applicazione può variare. Vedi anche WS25007A e WS25055A. L'adattatore universale per aspirapolvere da negozio consente agli utenti di continuare a utilizzare i tubi da 2-1/2 pollici di diametro per una maggiore raccolta di detriti e il massimo flusso d'aria, ma utilizzare un diametro di 1-1/4 pollici quando si collegano strumenti, accessori e accessori più piccoli. Fornisce ulteriore versatilità fornendo una gamma più ampia di strumenti e opzioni disponibili. L'adattatore per vuoto umido e secco collega gli accessori per vuoto umido e secco da 1-1/4 pollici a un tubo per vuoto umido/secco da 2-1/2 pollici. Succhialo. Fallo. con WORKSHOP Wet Dry Vacs WS25011A l'adattatore per vuoto umido e secco aiuta a sfruttare maggiormente il vuoto del tuo negozio. Il miglior adattatore per vuoto umido e secco per la tua applicazione può variare. Vedi anche WS25007A e WS25055A. L'adattatore universale per aspirapolvere da negozio consente agli utenti di continuare a utilizzare i tubi da 2-1/2 pollici di diametro per una maggiore raccolta di detriti e il massimo flusso d'aria, ma utilizzare un diametro di 1-1/4 pollici quando si collegano strumenti, accessori e accessori più piccoli. Fornisce ulteriore versatilità fornendo una gamma più ampia di strumenti e opzioni disponibili. L'adattatore per vuoto a secco umido collega gli accessori per vuoto a secco umido da 1-1/4 pollici a un tubo per vuoto umido/secco da 2-1/2 pollici.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	WORKSHOP Wet/Dry Vacs
Color	Black
Color	‎Black
Country of Origin	‎Mexico
Customer Reviews	4.3 4.3 out of 5 stars 1,701 ratings 4.3 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎2-1/2 in. to 1-1/4 in. Adapter
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	2.44 x 2.44 x 3.25 inches
Item model number	‎WS25011A
Item Package Quantity	‎1
Item Weight	‎0.634 ounces
Manufacturer	‎Emerson Tool Company
Part Number	‎WS25011A
Power Source	‎hand_powered
Product Dimensions	‎2.44 x 2.44 x 3.25 inches
Special Features	‎Wet/Dry
Warranty Description	‎No Warranty

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: jt

Works as Expected. Sizing Claims Too Vague

I don't know about you all but this shop vacuum hose size thing is ridiculous. Rigid, ShopVac, Craftsman, and whoever else are petty. Either make them the standard sizes, same as standard PVC, or at least be upfront about the connection sizes ID and OD. I got this adapter to attach my Rigid vacuum/Dustopper to my DeWalt mitre saw. The hose from the vacuum to the adapter is from Rigid (model LA2550 2-1/2 in. x 7 ft. Dual-Flex Tug-A-Long Locking Vacuum Hose for RIDGID Wet/Dry Shop Vacuums). The adapter fits quite snug on the end of the hose. The smaller end does not fit onto the DeWalt saw. I had to heat gun a piece of PVC and stretch it around the end of the adapter. The other end of the PVC was also stretched wider the same amount so that it would fit snug inside of the saw. Other than the questionable sizing claims of the adapter, it works as hoped. The plastic maybe a little on the thin side and feels a bit flimsy but I don't expect to toss it around so it should be fine.

Scritto da: Tami

Doesn't fit Craftman 2.5" hose without adjustment

I bought this because I got a new Craftmans shop vac from Lowes. The end is 2.5" and all the attachments from my previous shop vac are 1.25". I tried to put it on the end of my 2.5" hose and it would fall back off because it was just slightly too big. I didn't want to have to deal with returning it so I added a small piece of electrical tape in one spot along the inside of the attachment. That took up just enough slack that it would stay on the end of the hose. 2 stars because after that adjustment it had good suction and the 1.25 end worked fine with all my attachments. Doable but poor quality control making it not as advertised.

Scritto da: MV

Works as expected

Good purchase- worked as expected.

Scritto da: Mike

Works with my Craftsman Wet Vac with 2 1/2 in hose.

I wanted something to clear out my A/C PVC pipes and had just purchased a Craftsman Wet/Vac and didn't realize it came with 2.5 inch hose so it was way too big to fit over the 1 in (outer dimension) PVC pipe like my old 1 1/4 inch hose did. This attachment fit right over the end of the 2.5 inch hose and fit over the PVC pipe perfectly and allows me to also use other tools meant for a 1 1/4 hose. I didn't give it a full 5 stars only because it's a little thin and doesn't seem that rugged, but for the price a good deal.

Scritto da: Bernard Metro

Solved the problem

The 2.5" hose of my 16 Gal. shop vac is unwieldy when working in small spaces. Bought this adapter so that I could add a 1.25" hose. This solved the problem, both in the workshop and when cleaning the cars. Worth the money. Strange that this is NOT a standard accessory with the larger shop vacs.

Scritto da: Mike

Fits perfectly.

Fits tools well. After reading the negative reviews about it not fitting, it appeared the users were not using it correctly. Now Thai have received the adapter, my suspicions were confirmed. The large end fits perfectly on the shop vac hose (2 1/2”) and the small end fits perfectly on my tools with 1 1/4” outlets. Looking at the pictures from the negative reviews, some were trying to fit this adapter to the outlet on the vacuum, where the hose attaches. It doesn’t go there, it goes on the end if the hose where the attachments go.

Scritto da: John

Works as described

I used to use a little 2.5 gallon craftsman shop vac that a 1 1/4" hose. I recently upgraded to a large Ridgid shop vac with 2 1/2" hose and I'm able to use all the old attachments on the new shop vac. I'm also able to hook up my Kreg K4 pocket hole jig using this attachment as well. It fits snugly onto attachments and is very useful. Glad I bought it.

Scritto da: Rusty Mccullough

It works as it is designed to

It is sturdy, sized according to specifications advertized

Scritto da: Robert Sawaryn

Is not as advertised

Absolutely terrible product. Not only does it not funnel, causing clogs. Neither are sized as advertised. Both are significantly smaller. Mine measured less than 1 inch by 2.2inches. bought product from company Woodstock for half the price and is far superior.

Scritto da: Gary Giste

Perfect for my shop vac!

This 2-1/2 to 1-14 adapter allows me to use more attachments with my shop vac.

Scritto da: Derek Thompson

Happy

Perfect fit very happy

Scritto da: Frank valencia

Buen producto

Buen producto tal y como son las medidas que ocupaba

Scritto da: PWS

Four Stars

Great adapter, better price than local stores.