WARN 39886 Accessorio componente verricello: gruppo presa telecomando per impianto elettrico a 5 fili

Brand:WARN

3.7/5

108.03

Il kit presa WARN 39886 consente ai telecomandi a 5 fili di funzionare con fonti di alimentazione a 12 volt per un uso più efficiente. Questo eccezionale kit include una presa remota a 5 fili e un cablaggio (telecomando venduto separatamente). È strategicamente progettato per tutti gli argani per camion WARN con cablaggio a 5 fili e 4 solenoidi (configurazioni sia in linea che quadrate). Non è compatibile con quanto segue: 9.5cti (utilizzare WARN PN 86688) e 9.5ti, 9.5si, 16.5ti (utilizzare WARN PN 64639).

Non compatibile con quanto segue: 9.5cti (usare WARN PN 86688) e 9.5ti, 9.5si, 16.5ti (usare WARN PN 64639). Progettato strategicamente per tutti gli argani per camion WARN con cablaggio a 5 fili e 4 solenoidi (configurazioni sia in linea che quadrate). Questo eccezionale kit include una presa remota a 5 fili e un cablaggio (telecomando venduto separatamente). Consente ai telecomandi a 5 fili di funzionare con fonti di alimentazione a 12 volt per un uso più efficiente.
Brand WARN
Brand ‎WARN
Country of Origin ‎USA
Customer Reviews 4.6 4.6 out of 5 stars 107 ratings 4.6 out of 5 stars
Exterior ‎Machined
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 8 x 1.25 x 8 inches
Item model number ‎39886
Item Weight 0.1 Pounds
Item Weight ‎1.6 ounces
Manufacturer ‎Warn
Manufacturer Part Number ‎39886
Model ‎39886
OEM Part Number ‎39886
Product Dimensions ‎8 x 1.25 x 8 inches

3.7

13 Review
5 Star
81
4 Star
14
3 Star
0
2 Star
0
1 Star
5

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Sean m
Fixed the winch on my 2008 powerwagon
The socket was damaged on my powerwagon so I used this to replace the whole harness. You can get the control box out without removing the winch. It’s just not easily. This will also remove the low voltage disconnect and motor over heat cut out that regular warren winches done come with anyway so that’s fine with me. It comes with instructions including a wiring diagram so there’s no confusion.
Scritto da: Douglas
FIT PERFECT
MY WARN WINCH BURNED THE CABLES AND REPLACED IT WITH THE NEW ASSEMBLY. GLAD I TOOK A PICTURE BEFORE I REPLACE IT. LOST OF COMBINATIONS INSIDE THE BOX.
Scritto da: Shane Beauseau
Great part
Better than the original. Easy replacement.
Scritto da: Rick
Buy a different one
Had to cut and tie into the ground wire to make it work the remote switch cable is not grounded.
Scritto da: Doug Little
Replacement 5 pin harness
It will fit a warn 9.5ti, it will need to be trimmed to fit opening. It is not an easy install, but did work following supplied wiring diagram and talking with warn techs. Original part no longer available. This works but with some hassles. Would recommend
Scritto da: Lon B. Ayers
That it's the right part
The part was the correct part and the plus was the very clear wiring schematic that came with the part
Scritto da: sara f hawkins
Replaced a bad socket.
Was installed on a Warn XD9000i. Works great!
Scritto da: charles wolf
Correct part for five pin remote winch
Worked great perfect and replacement
Scritto da: Amazon Customer
Good quality, wire colours have changed.
The wire colours have changed between the original and the replacement plug, so pay attention to the pin orientation when installing the wires. And yes I did it right, "OUT" spools out, "IN" goes in and releasing the buttons stops the winch. The rest of the new plug is OEM quality.
Scritto da: Amazon Customer
Replacement harness m8000
Perfect fit
Scritto da: Pierre
Good
Parfaite pièce de remplacement. Fonctionne très bien.
Scritto da: Amazon Customer
Five Stars
Came on time and works!
Scritto da: Amazon Customer
Works on Ram 2500 Power Wagon
Works on my 2006 Ram 2500 power wagon, with minor wiring changes.

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart