Trend Air Stealth Maschera Antipolvere, Semimaschera con Doppio Filtro HEPAC Sostituibile per Falegnameria, Edilizia e Lavori di Costruzione, Medio/Grande, STEALTH/ML

Name: Trend Air Stealth Maschera Antipolvere, Semimaschera con Doppio Filtro HEPAC Sostituibile per Falegnameria, Edilizia e Lavori di Costruzione, Medio/Grande, STEALTH/ML
Brand: TREND
SKU: 5027654062210
Price: 46.72 EUR
Availability: InStock

Brand:TREND

3.4/5

€
46.72

Dalla nuova generazione di semimaschere N100, la maschera Trend Stealth Air presenta una costruzione ergonomica a basso profilo. Il design sottile, compatto e leggero della semimaschera consente all'utente di godere di una buona visione a 360° con una protezione respiratoria ultra efficiente secondo gli standard N100 APF10, coprendo particelle sospese nell'aria, nebbia, saldature, fumi, polvere, intonaco, cemento e polvere di silice a 99. Efficienza del 99% a 0,3 micron e oltre. Con due filtri pieghettati HEPAC (High Efficiency Particulate Air Composite) facili da sostituire alloggiati dietro griglie incernierate, questo respiratore a maschera li protegge da umidità e particelle, fornendo migliori prestazioni ed efficienza del filtro. L'ampia superficie del filtro sull'area del filtro della maschera consente il massimo flusso d'aria mentre lavori per una minore resistenza respiratoria e un'esperienza di lavoro più confortevole per lunghi periodi di utilizzo.

Prodotto non disponibile

EAN: 5027654062210

Categories: Strumenti e miglioramento della casa, Sicurezza sicurezza, Equipaggiamento per la protezione personale, Maschere e respiratori, Respiratori,

TECNOLOGIA DI FILTRAZIONE AVANZATA: Il filtro con design incapsulato a doppia piega HEPAC fornisce una filtrazione del 99,99% di particelle e aerosol sospesi nell'aria a 0,3 micron e oltre, con una griglia protettiva che copre il 100% della superficie del filtro. USI MULTIPLI: Adatta a vari compiti come verniciatura a base d'acqua, edilizia, saldatura e fai-da-te, la maschera protegge da polvere di silice, polvere di mattoni, polvere di cemento, grano, gesso, aerosol d'olio e particelle sospese nell'aria. IDEALE PER LA PELLE SENSIBILE: Realizzata con materiali inodori e anallergici, il corpo della maschera in TPE è privo di lattice e silicone, il che lo rende ideale per le pelli sensibili. PROTEZIONE RESPIRATORIA COMPLETA: con un'ampia superficie filtrante e una protezione respiratoria completa, la semimaschera protegge da più particelle di lavoro in casa, in officina o sul posto di lavoro. TRASPIRANTE E CONFORTEVOLE: la maschera riutilizzabile con valvola di espirazione inferiore è progettata per un'esperienza di lavoro confortevole e traspirante senza appannamento o appannamento per chi indossa gli occhiali. Importato. Policarbonato, TPE Silicone non lattice e Panno. Ideale per pelli sensibili.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	TREND
Color	Red/Black Or Green/Black
Color	‎Red/Black Or Green/Black
Country of Origin	‎USA
Customer Reviews	4.3 4.3 out of 5 stars 5,065 ratings 4.3 out of 5 stars
Filter Class	N100
Included Components	‎1x AIR STEALTH Half Mask Medium/Large APF10 in red/black or green/black
Is Discontinued By Manufacturer	‎No
Item model number	‎STEALTH/ML
Item Package Quantity	‎1
Item Weight	‎7 ounces
Manufacturer	‎TREND
Material	‎Polycarbonate, TPE Non latex silicone and Cloth. Ideal for sensitive skin
Measurement System	‎Metric
Number of Items	1
Part Number	‎STEALTH/ML
Pattern	‎Respirator
Product Dimensions	‎5.51 x 4.13 x 5.51 inches
Size	Medium/Large
Size	‎Medium/Large
Special Features	‎Lightweight,Reusable
Style	‎Medium/Large
Warranty Description	‎One year manufacturer

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Jaybird

Fits Like a Custom Made Mask

Saw this mask recommended on a YouTube woodworking site. The fit of this mask is exceptional and usually only attainable in a custom fitted commercial mask. This mask fit perfectly and sealed up completely the first time I put it on. The rubber like material around the face and nose is extremely soft and flexible and sealed up perfectly. I would say I have an average type face for a 220 lb 6’1” guy. You can tell the mask is sealed by the movement of the mask when inhaling/exhaling plus there are no odors that get through. Also safety glasses do not fog up indicating no escape of exhalation around edges of mask. Did not have to tighten mask excessively to attain sealing and mask is very comfortable. Only downside would be the replacement N 100 filters cost almost as much as a complete new filter. Used while routing MDF cabinet doors with zero penetration of the extremely small(less than 5 microns) dust created by the router. Don’t risk your health with dust masks or other face masks held in place with rubber band type straps if you work with MDF or other materials that create hazardous small particles.

Scritto da: Dave

Size exchange?

I understand that there is a "no return" policy. But they should at least have a size exchange option. Having it listed as M / L is vague. The only way to know if this fits you is to take a chance. It turned out that M / L is too big :(

Scritto da: Alexander R. Pruss

good for indoor rock climbing and grocery store

By now I have a large collection of masks and respirators. I have modified this one by placing a circle of surgical mask material over the valve to protect other people. This made it too difficult to exhale, so I additionally removed the one-way valves on the cheek inhalation filters, and as a result most of the exhalation goes through the inhalation filters which are now being used for both directions (no doubt reducing their useful lifetime; BTW, I can't find what that lifetime is in the manual). Of course, I didn't remove the inhalation one-way valve, or my protection level would go down to that of the surgical mask material! The result is a mask that is very easy to breathe through: so easy that at times I have worried that the filters have fallen out (no worries: they are quite secure, actually). Occasionally I have felt the tell-tale coolness of a bit of air slipping out around the plastic near the nose. It feels like there is less leakage when inhaling than exhaling. I can remove most or maybe all of this leakage if I cinch the mask somewhat uncomfortably (but not painfully) tight, and it also helps when my face gets sweaty (the sweat seems to help the seal). Note that I have a particularly large nose on a face that is more medium than large. With the inhalation one-way valves removed, I think I am pretty comprehensible when talking through this mask. It's probably not quite as good as a KN95 or surgical mask for communication, but it seems much better than my 3M 6300 respirator with its P100 filters (and its one-way valves intact, but the exhale valve covered with a filter). My main use for this respirator is rock climbing at the gym. I did have to explain to the desk staff once that the exhale valve was covered (the gym has strict rules against valves). Because of the smooth round plastic shape of the mask, the rope doesn't catch on it like it does on my 3M 6300 respirator. It probably even provides some bonus impact protection for my face! Cinched tight, with sweat adding to the seal, and with inhale one-ways removed, the very heavy exhalations that I generate when climbing typically do NOT manage to push the mask away from the face, and as a result my belayer is generally protected from my breath, no doubt much better than if I were wearing a cloth mask. After exercising, the inside of the mask is covered with sweat, but the filters are set far enough away from the face that they appear unharmed. There is a chin sweat drain that one can unplug after use, but I don't find it that helpful. I have also used this in place of my usual 3M P100 respirator for going to the grocery store when with a kid, so that I could more easily talk to them. Comfort/convenience comparison with my 3M 6300 respirator: The straps are fairly comfortable even when cinched tight, but I prefer the 3M's top-of-head harness to the top Stealth Air strap. The face-contact plastic is stiffer and less comfortable than on the 6300, and appears to seal less well. And the sweat drain plug can dig into the chin. The back-of-head strap snaps together in a nice and secure way once you get the hang of it, but the 3M quick-join clasp is a bit faster. It's slightly inconvenient that one cannot independently adjust the top strap tightness: when you tighten the top strap, the bottom strap becomes looser, and then you have tighten it in turn. PROS: - smooth shape doesn't get caught on things - ease of talking once inhalation one-way valves are removed - N100 filters CONS: - stiffish face-contact plastic - imperfect fit around nose except when cinched very tight - big and sticks out a lot

Scritto da: Zion Home

Great Dusk Mask!

This is a great product for those having to do a lot of sanding (dry walls, wood, et.,). Comfortable fit and easy to breakdown, clean and reuse. Definitely looking to purchase a few more of these in the near future for workers.

Scritto da: Steel402

A+

This thing is pretty nice aside from all the condensation you build up. Aside from that it does work great.

Scritto da: Jeannie

Best mask I found for wearing with glasses but size chart is off.

Ever since the start of the pandemic, I have struggled to find a mask that wouldn't fog up my glasses. After seeing a recommendation for this mask for use in a shop on a YouTube woodworking channel, I ordered a small/medium mask based on the sizing chart even though, technically, it is not for medical use due to the exhaust valve. It fit, but not very comfortably. On the plus size, it didn't fog up my glasses and was fairly easy to put on once I sorted out how to adjust the straps. I didn't even have to take off my glasses to put it on. However, it just felt too narrow on my face, crowding my mouth and cheeks, and pinched my nose a bit. I decided to try out the medium/large and ordered it. It fit perfectly and was far more comfortable. It was also easier to breathe and talk in, so easy, in fact, I had to check to make sure there were filters in it (they were) and the check valves were working properly (they were). Again, it was easy to put on, I didn't have to remove my glasses to do so, and my glasses do not fog up. This one is a keeper and I'm going to get a second one in this size so I can keep one in my truck and another one in the house. Obviously, this mask will be ideal for protection from dust when cleaning the house or working with wood and metal. I'm wearing a conventional pleated surgical mask positioned over the respirator's exhaust valve so I won't be spewing any potential viruses on other people. It also covers the respirator's filter intakes so that may give me a slight added bit of protection. The sizing chart needs work. My face was well within the small/medium range according to the chart yet the mask was still too small. I can't return the mask , especially since I had worn it several times but I'm keeping the filters and any other parts I can salvage so I'm not out much money. BTW, If one is going to wear this mask very much, get the five pair filter pack; they are much less expensive that way. The enormous fly in the ointment is the flimsy box these are packed in. Even worse is Amazon's inexcusable use of flimsy paper envelopes to ship them in. Fortunately, even though both boxes I received were in pretty tough shape, the masks were still in good shape. Amazon has a habit of using the cheapest packaging possible but the only time I've seen it worse than this was when I received multiple shipment of light bulbs to replace ones that arrived broken because of the repeated, ridiculously inadequate packaging. These masks should be shipped in a sturdy boxes with enough padding, such as air pillows, to protect the flimsy box the respirators come in.

Scritto da: Sam

Mumph, bimm,

Sorry forgot to take the mask off ???? VERY comfortable to wear. Easy to adjust and easy to change out filter pads. I use it for working with my resin.

Scritto da: The glass man

Quality mask at bargain price

At £9 price I was rather cautious as to what the quality of this mask would be, especially as it came with filters. I am pleasantly surprised, I have worn it for a good period of times and it comfortable and effective. The filter replacement system is easy and quick and the straps seem to be thick enough to last a while. The mask is very lightweight when on and the exhalation vent is low on the mask, a real benefit as it stops safety goggles from steaming up. After 2 days use this gets a thumbs up from me.

Scritto da: Adam Moverley

Great mask

Great mask I wear glasses and struggle with masks as they steam my glasses up not a problem with this mask every time I've worn it my glasses have stayed clear. Very comfortable to wear.

Scritto da: Company

Great product!

Scritto da: Jack

Make sure you get the right size! S/M for glasses

If you wear glasses, be aware that this may not fit. The nose section, in order to seal properly to your face, comes way up high on the nose, therefore glasses won't sit correctly. If you put the mask lower on your nose, it doesn't seal around the chin. *EDIT* Amended my rating from 3 to 5. I actually realised that I ordered the M/L version of this mask, but should have ordered the S/M. The mask now fits great and I can wear my glasses with it, so my mistake. It's actually a really good mask. Make sure you get an appropriate size! The S/M is much smaller than the M/L. They actually fit

Scritto da: Donald Wilson

Very efficient and surprisingly comfortable.

At last. A dust mask which doesn't make my glasses steam up! I've tried quite a few masks before discovering this one. Each and every so far had me wiping my glasses constantly. I work with a wood lathe and this provides excellent protection. Wood dust can get through an inferior mask very easily, so don't skimp on a cheap alternative. The replacement filters are a bit pricey but if you shop around you can find them relatively cheap.