TH Marine LED-51829-DP Luce a cupola a LED per montaggio superficiale LED combinati rosso/bianco

Brand:T-H Marine

3.3/5

67.92

Illumina facilmente l'interno della tua barca o del tuo camper con la luce a cupola a LED montata su superficie di TH Marine. Queste potenti luci a LED emettono luce bianca o rossa e presentano un ampio angolo del fascio di 120 gradi per fornire una visibilità ottimale. L'alloggiamento stabile ai raggi UV resiste allo sbiadimento ed è inoltre completamente sigillato in resina epossidica per resistere all'acqua, alla corrosione e alle vibrazioni.

Prodotto non disponibile
BASSO CONSUMO DI POTENZA - questa luce ad alta efficienza energetica assorbe una potenza minima dalla tua barca o camper e dispone di un interruttore a bilanciere on/off facile da usare in modo da non doverti mai preoccupare di sprecare elettricità. FACILE INSTALLAZIONE - i dispositivi di fissaggio nascosti e l'hardware incluso consentono a questa luce di montare facilmente praticamente su qualsiasi superficie piana. LUNGA DURATA - I LED a lunga durata abbinati a un alloggiamento stabile ai raggi UV manterranno questa luce interna emettendo luce nitida e brillante fino a 100.000 ore. RESISTENTE ALL'ACQUA - i circuiti sono completamente sigillati in resina epossidica per proteggere da acqua, corrosione e vibrazioni. SUPER LUMINOSO - i potenti LED super flusso (P4) offrono un'illuminazione eccellente in modalità rossa o bianca e un'ampia copertura di 120 gradi.
Auto Part Position Unknown
Auto Part Position ‎Unknown
Brand T-H Marine
Brand ‎T-H Marine
Brand Name ‎T-H Marine
Color Red / White Combo LEDs
Color ‎Red / White Combo LEDs
Customer Reviews 4.2 4.2 out of 5 stars 214 ratings 4.2 out of 5 stars
Fishing Technique ‎Dome Light
Included Components ‎Light
Item Dimensions LxWxH 1 x 4.7 x 4.7 inches
Item Dimensions LxWxH ‎1 x 4.7 x 4.7 inches
Item Package Dimensions L x W x H ‎8.66 x 4.65 x 1.42 inches
Item Weight ‎0.17 Pounds
Lens Color Red
Lens Color ‎Red
Light Source Type LED
Light Source Type ‎LED
Manufacturer ‎TH Marine
Material ‎Plastic
Model Name ‎LED Surface Mount Dome Light
Number of Items ‎1
Package Weight ‎0.12 Kilograms
Part Number ‎LED-51830-DP
Size ‎4 inch
Specific Uses For Product Interior
Specific Uses For Product ‎Interior
Suggested Users ‎Unisex-adult
Vehicle Service Type Car
Vehicle Service Type ‎Car
Voltage 12 Volts
Voltage ‎12 Volts
Warranty Description ‎1 year manufacturer

3.3

10 Review
5 Star
58
4 Star
21
3 Star
10
2 Star
6
1 Star
5

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: mountaineer
Great BRIGHT lights
Installed on pontoon boat on canopy structure over a table area. I wanted something that could get wet when the canopy was off and during outdoor storage of the boat. I also wanted something with red light. We spend nights sitting under the stars and need to see when at the table area. I have not verified, but the light is in epoxy to allow getting wet. The light switch is covered by a plastic cover glued on the edges to keep it dry (I don't think the switch is waterproof itself). I don't know how well the plastic cover will hold up, but not sure it will last too long before it falls off, gets cut by fingernails, or gets sliced in some way. It has four holes to secure the cover to the ceiling (screws included). The two wires are tinned with silver to reduce corrosion. Connect the two wires, secure it and your done. Installation (with boat wiring already in place) using weatherproof heat shrink butt connectors, drilling, testing, etc. took about 20 minutes to install. This is a really a great light and we are thinking of replacing one other light we have with this one. It is very bright for both write and red lights. The entire section of the 28ft boat is clearly lit (even in red). The definitions of objects with the red light seems extremely crisp (something I had not expected). Low power usage. I don't anticipate any problems with this light. The only two downsides of the light. The outside cover is hollow in the back to support hiding wires back there. If water comes from above, this will hold water. This problem exists with all covers I've seen. For my situation, if it become a problem, I'll drill some small holes to drain the water. The second issue is flush mounting the light. It works, but the wiring is tight and takes some work to get the wires pushed up and the light secured in the cover. Both are normal situations with almost all lights like this.
Scritto da: RGMac
Decent light
I like the red/white toggle switch, and it seems durable enough. It's hard to install because of the way the light is structured.
Scritto da: Stephen Barr
Shouldn't have had to replace this fixture
The boat came with this light and after 3 seasons there were only a couple of the LEDs working. I replaced the light with the exact same fixture and I'm hoping that it lasts. It's got LEDs and they are supposed to last for thousands of hours. I'm just hoping that the fixture that came with the boat was defective. If the LEDs start dying, I'll be looking for a different lamp.
Scritto da: rbeaus
Bizarre product!
This product was clearly designed by someone who knows nothing about boats of boaters. In order to conceal the tiny mounting screws, they’ve made it a bayonet style mounting system. That requires leaving some slack in the wire. Then it’s impossible to mount to the cabin ceiling. A waterproof switch makes it difficult to turn on. If your boat is under water, you’ve got bigger problems than a switch shorting out. It’s more like a spotlight or map light. Lighting only a small circle directly under it! Leaving the rest of the cabin dark. I ended up reinstalling my old cabin light.
Scritto da: Amazon Customer
Low quality materials
Low quality plastic, screws and construction feels like it costs $5 to make or less. It works but has a very cheap feeling
Scritto da: m_chiclana
awesome little light
need good quality Stainless Steel screws that can self drill to mount. With the included screws it was impossible to drill the holes, I simply replace those with high quality SST and voila, screws in seconds.
Scritto da: Carson H Hobart
Mounting is difficult
if you do not have a hole to shove the wires into before sliding light fixture in, it is a long game of finessing the wires appropriately so you can slide the inside "bulb" into the mounting fixture.
Scritto da: Amazon Customer
Marine closet light
Easily wired to fit closet in my 1976 36’ Grand Banks.
Scritto da: David Kunuk
perfect for the boat cuddy cabin...
As the title say, I am pleased with the light ...
Scritto da: Amazon Customer
Make sure of the hole opening first
Easy to install and it has lots of light

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart