0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

Supporto pieghevole BOSCH GTA500 per sega da banco portatile da 10 pollici (GTS1031), blu

Brand:BOSCH

3.8/5

€
230.91

DESCRIZIONE DEL PRODOTTO La linea di svasatori BOSCH è ideale per sbavare e smussare aperture in fori preforati. Ottimo per gli appaltatori elettrici, idraulici e HVAC. Gli svasatori BOSCH tagliano vari materiali in modo pulito e preciso. Con acciaio ad alta velocità standard e punte rivestite in titanio super duro, queste svasature si comportano alla grande anche nei materiali più duri. DAL PRODUTTORE Il supporto per sega da banco pieghevole senza attrezzi Bosch GTA500 è un accessorio perfetto per accompagnare la tua sega da banco portatile GTS1031 da 10 pollici. Il supporto presenta una funzionalità senza attrezzi: attacca e stacca la sega in pochi secondi, senza attrezzi. Design interamente in acciaio, baricentro solido per le massime prestazioni.

Prodotto non disponibile

EAN: 0000346426526

Categories: Strumenti e miglioramento della casa, Utensili elettrici e manuali, Parti e accessori per utensili elettrici, Supporti e basi mobili, Stand,

Leggero: pesa solo 14 libbre e può essere facilmente trasportato con una sola mano. Solido e resistente: design interamente in acciaio con solido centro di gravità per le massime prestazioni. Si piega in piano per un comodo trasporto e stoccaggio. Attacca e stacca il supporto per sega in pochi secondi, senza attrezzi. Compatibilità esclusiva con GTS1031.
Batteries Included? ‎No
Batteries Required? ‎No
Blade Length ‎10 Inches
Blade Material High Speed Steel
Blade Material ‎High Speed Steel
Brand BOSCH
Brand ‎BOSCH
Color Blue
Color ‎Blue
Customer Reviews 4.8 4.8 out of 5 stars 334 ratings 4.8 out of 5 stars
Included Components (1) GTA500 Table Saw Stand
Included Components ‎
Is Discontinued By Manufacturer ‎No
Item model number ‎GTA500
Item Package Quantity ‎1
Item Weight ‎6.7 Pounds
Manufacturer ‎Bosch
Part Number ‎GTA500
Power Source Corded Electric
Power Source ‎Corded Electric
Product Dimensions ‎23 x 5 x 22 inches
Product Dimensions ‎23"L x 5"W x 22"H
Voltage ‎120 Volts
Warranty Description ‎Limited 1 Year

3.8

13 Review
5 Star
85
4 Star
10
3 Star
2
2 Star
1
1 Star
1

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Mit Ffracs
Very sturdy, low platform that can be adapted for many workshop uses.
The stand is specific for a Bosch table saw, but can easily be adapted for other equipment by making a "form-fitting 1" table top that locks into the brackets; or by making 3/4' bases for other equipment and bolting them to the table through the pre-drilled corner holes (by-passing the tables hinged clamps). The stand is lightweight and folds to 4-5" thick. I am 67" tall, so the low table level is not an issue. I was pleased enough with the quality and price to try to order a second from Amazon, but Amazon was out of stock. (I was able to order from Home Depot for roughly the same price.)
Scritto da: DawnHawk
Works very well on Craftsman Pro Job Site saw / Ridgid Compact saw
This is sturdier and more stable than it looks. Only assembly is the leg extensions. Wish they were continuous but that would have required a much larger package. The couplers seem sturdy enough though. This works fine on my Craftsman professional job site saw. This is the tubular frame saw that is red with wheels and a telescoping handle. It is pretty much the same as the Ridgid compact saw. Neither are sold anymore. Too bad, they are cheaper and have more rip capacity than the Bosch or Dewalt. Good quality too. They have a machined metal miter gage, unlike the Dewalt's plastic one (don't know about the Bosch). The top of the stand is just the right size for the saw base. All you have to do is attach a couple of 1x3 hardwood strips laterally to the saw's feet so they will fit into the clamping mechanism on the base top. The round tubes on these saws are fatter than the square ones on the Bosch and won't fit the clips directly. It helps if you reverse the feet on the saw so the bolt holes are inboard, giving you better spacing for the strips. I considered getting the Bosch gravity rise universal stand, but that costs about three times as much and weight about as much as my saw. Would be a real beast to lug up stairs. The Craftsman already has wheels and is manageable by itself. It shouldn't be much trouble to adapt most compact saws to the stand by attaching wooden strips to the saw base. It does increase the height by 3/4" however, which is fine with me as most table saw are lower than they need to be.
Scritto da: R Nance
Very sturdy Stand
I was skeptical about buying the stand because I saw it as one more accessory that I will not use. I was completely wrong. In my opinion, the stand should be included as part of the package with the table saw. It frees up so much space around the saw because the compact design allows you to walk completely around the saw. You couldn't do this by sitting the saw on a normal table or by using creating a makeshift table. I'm a DIY person and use the stand for home projects but I can imagine that the table would be very handy for professional carpenters that have to set up workstations onsite. It takes up very little space with saw on top of it. I read a review where someone who was 6'3" complained that the height of the table made the saw sit too low. Well, I'm 6'2" and I think the saw height is perfect on the stand. Maybe the other person had short arms but there shouldn't be a problem with the height unless you're extremely tall. Stand is very sturdy and easy to setup.
Scritto da: Leon Paz
Very Happy with it
I am one of those that think any "accessories" specifically design for any other product are just a long shot to get more of the customer's money... Well, this is not that. It is a very well designed Table-saw stand that happens to fit perfectly with my gts1031 because it was design to suit not only the footprint and balance but also the clamping zones of this specific model. (Bosh only has 2 different tablesaws) This stand is a LOT more stable than expected from the images and puts the work height at a very comfy level. I'm 5' 10". Well Done for the Bosch Design dept! (I used different TV dinner tables, patio tables, floor, stools, until I got tired and spent the money on this. Very Happy with it. Do your self a favor and don't waste time like me and just get it) I would also recommend the Bosch dust bag and the ts1012 zero clearance blade insert!
Scritto da: jofran
All that it was advertised to be
This stand is easy and fast to assemble, is sturdy and holds the saw firmly. The only down-side is the final height of the saw top. I am 6' 3" and have to bend over too far to work at the saw for long. Actually, even a slight bending for a short time is tough on my aging lower back. Solved the problem by building a rolling platform out of wood I had on hand and bought 4 wheels (2 locking) to make the saw with stand portable in my garage, easily stored against the wall and at the right height for working. Like the stand and plan on adding a shop vac to complete the package. Will probably buy that from Amazon as I did the stand, especially if it includes free shipping as the purchase of this stand did.
Scritto da: Janice Saunders
Easy setup and mounting of saw.
Worked well on uneven brick floor. Held up to cutting 2x8x6' walnut without any moving. So, lightweight but sturdy.
Scritto da: Leonard1953
Fits Bosch table saw perfect, tough quality
Fits my Bosch table saw perfectly, should have bought one a long time ago,
Scritto da: Buddy K.
GOOD STURDY TABLE SAW STAND!
This stand is made very well. The frame lines up with the table saw. It can hold three times the weight of the table saw. The extension legs are easy to install and folds down without effort. It is easy to lock in place. It is priced right under $95 dollars
Scritto da: Xavier A.
Soporte perfecto para la sierra para la que esta diseniado
El soporte es perfecto para la sierra para la que esta diseniado. Puede ser un poco dificil "atinar" a los clips que sujetan la parte posterior y que quede centrada tal que el broche del frente este alineado con la pestania de la que se sujeta, pero solo es cuestion de practica. Creo que si pudieron haber hecho algo mas amigable con el usuario (alinear una sierra de 20kg 5 o 10 mm con el soporte cargandolo con ambos brazos no es facil), pero cumple su funcion.
Scritto da: Neil R.
Its a perfect match for the "Bosch GTS1031" 10" Portable Table Saw!
If you own, or are thinking of buying the Bosch GTS1031 10" Portable Table Saw, then you have to get one of these, it's a perfect match for the saw. The set up is literally a minute or less, the saw clamps down firmly into place and provides a solid, sturdy fit for your GTS1031 10" Table Saw. When your done with the saw, you can quickly unclamp it from the stand, fold the stand. then hang it on a wall, or place it out of the way in your garage. Very happy with both the purchase and the delivery service that Amazon.ca provides ...
Scritto da: Craftsman Mario
The stand is built out of steel and it is very sturdy providing one with a safe stable work-surface at a ...
Worth every penny. The Bosch GTS 1031 slides right into the two clips in the back and the front gets firmly attached with a flip-clamp. It takes ten seconds to set the saw up in the stand. The stand is built out of steel and it is very sturdy providing one with a safe stable work-surface at a comfortable height. The stand also folds for easy storage. The photo doesn't do the stand justice. My advice is buy it together with the GTS1031 saw.
Scritto da: RahulB
Surprisingly Sturdy
When i initially saw this, i was reluctant to get it as I'd not seen it in stores in person. I thought it was a flimsy stand that would probably wobble and rattle. Wasn't very keen on the latch system as well to secure the saw on. When I got the box, it was pretty heavy and that was a good first initial impression. The set-up instructions were clear and its engineered well - the legs are set up specifically (Look out for the ABCD markings) and the latch holds the saw firmly in place . I used this for a flooring project and cut multiple panels without it wobbling at all. We then also put 2x4's as well as MDF sheets through and it held up really well as well - very pleased.
Scritto da: Frank P.
Great little table for the price
Needed to drill two holes to fit my Ryobi table saw. Nice and sturdy, great price.

Prodotti correlati

hot
Metabo HPT Cavalletti da sega
3.6/5

€ 233.12

Metabo HPT Cavalletti da sega
3.6/5

€ 233.12

hot
Rousseau 2700FX Guida di ricambio per sega circolare per modelli 2700XL, 2750 e 2775
3.7/5

€ 253.71

Rousseau 2700FX Guida di ricambio per sega circolare per modelli 2700XL, 2750 e 2775
3.7/5

€ 253.71

hot
Bora Centipede 4ft x 6ft 12-Strut Work Support e cavalletto portatile con accessori, CK12S Work Stand Orange
3.8/5

€ 349.65

Bora Centipede 4ft x 6ft 12-Strut Work Support e cavalletto portatile con accessori, CK12S Work Stand Orange
3.8/5

€ 349.65

hot
Workstation portatile Rockwell RK9002 JawHorse Sheetmaster
3.7/5

€ 926.71

Workstation portatile Rockwell RK9002 JawHorse Sheetmaster
3.7/5

€ 926.71

hot
Bora Centipede 4x8 15-Strut Supporto da lavoro e tavolo portatile
3.8/5

€ 528.69

Bora Centipede 4x8 15-Strut Supporto da lavoro e tavolo portatile
3.8/5

€ 528.69

hot
Gruppo supporto uscita BOSCH TS1016
3.5/5

€ 176.84

Gruppo supporto uscita BOSCH TS1016
3.5/5

€ 176.84

hot
Supporto da pavimento JET CS-18 per fresatrice/trapanatrice (350045)
3/5

€ 1206.80

Supporto da pavimento JET CS-18 per fresatrice/trapanatrice (350045)
3/5

€ 1206.80

hot
BORA Next Gen Panel Carrier, Panel Dolly e Table Saw Feed Stand che si regola da 28" a 38" H, PM-1850
2.3/5

€ 265.07

BORA Next Gen Panel Carrier, Panel Dolly e Table Saw Feed Stand che si regola da 28" a 38" H, PM-1850
2.3/5

€ 265.07

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu