Summit Outdoors E1088 Staffe per Ascensore, Casetta da Gioco in Acciaio per Costruzioni, Altalena, Casa sull'Albero e Staffe per Supporto per Cervi, 4x4 (Set di 4) Nero

Brand:Elevators

3.8/5

235.83

Risparmia tempo con le nostre staffe per ascensori angolari composte E1088 4 x 4. Le nostre staffe per ascensori sono costruite negli Stati Uniti e presentano oltre il 30% in più di acciaio premium rispetto a qualsiasi altro concorrente, il che significa che non sono solo più resistenti, ma anche costruite per durare più a lungo. I nostri ascensori sono progettati per resistere agli elementi e possono resistere a venti forti e temperature gelide che altri non possono. Ogni 4x4 inserisce 5,75" per garantire la massima sicurezza e robustezza. I nostri ascensori in acciaio calibro 12 per impieghi gravosi sono inoltre dotati di giunti saldati roboticamente e sono abbastanza robusti da supportare casette fai-da-te, piattaforme per altalene, tende per cervi o ponti autoportanti. Gli ascensori sono progettati con un angolo di 8° che è scientificamente provato essere l'angolo ottimale per sostenere carichi verticali e prevenire l'oscillazione da un lato all'altro. Nel tuo prossimo progetto, usa le staffe originali e migliori, Elevators, sempre prodotto negli Stati Uniti. 4 ascensori individuali E1088 inclusi.

Prodotto negli Stati Uniti: siamo il fornitore originale e più affidabile di staffe per ascensori ciechi di cervo. Costruisci meglio: le nostre staffe multiuso per ascensori / supporti per cervi presentano un angolo di 8° che è scientificamente provato essere l'angolo ottimale per i carichi verticali e prevenire l'oscillazione da un lato all'altro. Design brevettato: le nostre staffe per case sull'albero di facile utilizzo sono dotate di fori preforati per viti a testa tonda o bulloni a testa tonda e sono ideali per la costruzione di casette stabili, piattaforme per altalene, ponti autoportanti o supporti per alberi di cervo. Costruito per resistere: realizzati in robusto acciaio premium calibro 12 con giunti saldati, i nostri elevatori per cervi sono oltre il 30% più resistenti della concorrenza e sono costruiti per resistere a tutte le condizioni. Staffe per ascensori multifunzionali (4x4): le nostre versatili staffe per montanti 4x4 sono perfette per la casa sull'albero, l'altalena, la torre di osservazione e le staffe cieche per cervi sopraelevate.
Age Range (Description) Adult
Age Range (Description) ‎Adult
Batteries Included? ‎No
Batteries Required? ‎No
Brand Elevators
Brand ‎Elevators
Color Black
Color ‎Black
Country of Origin ‎USA
Customer Reviews 4.8 4.8 out of 5 stars 989 ratings 4.8 out of 5 stars
Floor Length ‎8.4 Inches
Included Components ‎Set of 4 E1088 Elevator Brackets
Installation Method Free Standing
Installation Method ‎Free Standing
Is Discontinued By Manufacturer ‎No
Item model number ‎E1088
Item Package Quantity ‎1
Item Weight 24 Pounds
Item Weight ‎24 Pounds
Manufacturer ‎Elevators, LLC
Material Alloy Steel
Material ‎Alloy Steel
Number Of Pieces ‎4
Part Number ‎E1088
Pole Material Type ‎Wood
Product Care Instructions Hand Wash
Product Care Instructions ‎Hand Wash
Product Dimensions 8.4"L x 4"W x 11.7"H
Product Dimensions ‎8.4 x 4 x 11.7 inches
Product Dimensions ‎8.4"L x 4"W x 11.7"H
Recommended Uses For Product Hunting
Recommended Uses For Product ‎Hunting
Size ‎4 x 4
Sport Hunting, Outdoor Lifestyle
Sport ‎Hunting, Outdoor Lifestyle
Style ‎4 X 4
Warranty Description ‎Lifetime Warranty

3.8

12 Review
5 Star
86
4 Star
9
3 Star
3
2 Star
1
1 Star
2

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Devin Riles
Solid Construction
These elevator brackets are well made with thick steel. The welds are solid and it looks like these will hold plenty of weight for the deer stand I'm building. The only slight issue is that deep in the pocket where the plates attach to the 4x4 sockets, there is no powder coating and there was minor surface rust on the bare steel. A quick blast of rustoleum in the pocket should prevent and further corrosion. Otherwise, these are awesome.
Scritto da: disappointed
Best stand ever
Easy to install and then erect stand. With cross supports creates a very sturdy structure.
Scritto da: cw4usa
Great Value
Very sturdy construction and made building the new platform for my stand a breeze. When mounting the brackets, take great care in the sides that you mount them on. They will only work one way, properly. Mounted on the wrong sides, the force of the weight of your platform will try to pull the mounting board away from your intended connection...
Scritto da: Strawboss
Good product but has a small and neglible design flaw.
I did a very thorough www search to find the most suitable elevators for my stand. The ones I wanted were those which angled out in two directions ("compound angle") such that both sides of the platform corners got equal support. Some of those I found stated that they were built for the tower legs to be at a 15 degree angle outward from plumb. For my stand with 10' 4x4's I felt 15 degrees would result in an overkill spread between the posts at ground level. Meanwhile the descriptions for other elevators I found didn't state what the post angle was. For this set of elevators, the ones I bought, the Amazon description doesn't provide the post angle however both the manufacturer's website and the Home Depot's website state it's 8 degrees which is plenty adequate. They're also 12 gauge steel whereas some of the other brands of elevators are made of thinner material. To attach the elevators (those I'm reviewing) to your 2x6 the instructions call for carriage bolts to be inserted from the inside, through the wood member, with the nut on the outside. The only negative I found with these elevators is that inside vertical part of the elevator is too high and doesn't allow the carriage bolt head to clear it which is necessary for the bolt head to anchor into the wood. It's a bit of a struggle to work around this design mistake which the manufacturer could easily resolve. See photo below.
Scritto da: The BandMan
Decent
Priced a little high but worked great.
Scritto da: Amazon Customer
Awesome.
Awesome product.
Scritto da: Shepherd
Works great
Although I put them on two by fours with three-quarter inch plywood on the deck, they work great. Very sturdy and the best part is, they are made in the USA. This is going to be a elevated/heated deer tree stand.
Scritto da: boxer
excellent
Heavy-duty steel, easy to install.
Scritto da: Robert Snow
As advertised
These leg brackets are perfect for building a raised deer blind. They are strong and once 4”x4” legs are installed and secured as per the directions, there is no swaying. I would highly recommend
Scritto da: mario g.
Great product!
Awesome product! My elevated blind is all set up and crossbow deer hunting starts next Saturday, here is Quebec! Can't wait to get there.
Scritto da: David B.
excellent product
very sturdy and easy to set up. As advertized
Scritto da: Amazon Customer
good quality
Really good looks really nice

Prodotti correlati

hot

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart