Stick di colla Dremel GS45-01

Name: Stick di colla Dremel GS45-01
Brand: Dremel
SKU: 0080596048693
Price: 29.66 EUR
Availability: InStock

Brand:Dremel

3.7/5

€
29.66

Include 3 stick di colla. I residui si lavano via facilmente dalla piastra di costruzione della stampante 3D con acqua. L'alta qualità garantisce sempre la migliore adesione di stampa 3D. Il colore dell'applicazione viola infallibile consente agli utenti di vedere facilmente dove viene applicata la colla. Non tossico, privo di acidi e si lava facilmente con acqua.

Quantity

Aggiungi al carrello Compra subito

EAN: 0080596048693

Categories: Prodotti industriali e scientifici, Arti, artigianato e cucito, Creazione, Forniture artigianali, Adesivi, Colle e paste artistiche,

Brand	Dremel
Color	Purple
Country of Origin	China
Item Form	Sticks
Item model number	GS45-01
Item Package Quantity	1
Manufacturer	3PI Tech Solutions
Package Dimensions	4.41 x 3.27 x 1.26 inches; 4.87 Ounces
Special Feature	Acid-free

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: James Sovlinsky

First thing that actually WORKED!

I was having adhesion problems with my FLSUN QQ-S Pro. Many failed prints over the last month. I set the Z height too low, and managed to get adhesion, but it messed up my bed coating. I got a PEI spring steel magnetic plate, and even that really didn't help. Tried hairspray, no go. So I figured I'd try these glue sticks before I spent more serious money on specialty bed adhesives. Well, it actually works. The purple helps somewhat in knowing where you've applied the glue and where you haven't, but it helps more when a print is done and off the bed, as you can use plain hot water to clean the bed thoroughly, because the glue turns purple again when rehydrated. This is a huge help, as a clean bed, then glue application, seems to be what's working best for me. In any case, very happy and will be buying again, if the 3 pack doesn't last longer than the printer itself!

Scritto da: R. Carroll

Works Best

I tried the Elmer’s stick glue. It works OK but I think it dries to fast whereas this Dremel glue is a larger stick and it does work well.

Scritto da: Merc3D

Indicater color is good, small amount

I really try to avoid using glues with my prints as I find it to be a hassle. My latest printer has been hard to find my prefered spring steel bed plate for so i have been using the blue painters tape with glue method. I much prefer this type with the purple color as its easier to tell where you’ve applied it versus the standard white color. Only gripe is the glue sticks seem to run out quickly. Still, this is a cheaper and more effective option than some of the liquid applicated glues for printing ive tried here on amazon. You should be able to get a decent amount of prints before needing to reapply.

Scritto da: William Dobbins

I bought this on a whim because the 3D printing goop is overpriced.

While this may not work(haven't tested for other materials) PETG sticks very well to it. Clean bed while warm not hot, with water. Then one good wipe with isopropyl. Then let dry. Once dry do not touch, then add a single layer of this to it...let dry then warm bed up and print as normal. Do not touch. If you touch your finger oil will ruin it, and just a little touch is enough to mess it up. After printing you will not need to remove it, it literally pops off by itself once cooled. Again, printing dozens of prints with this stuff and PETG combo, and I have no issue with it.

Scritto da: J Roseman

Used on glass bed for 3D printing - going on purple was great!

These things work a charm and going on purple lets you see exactly where you've put the glue. I used these for a 3D printer and that said, I've since switched to a PEI bed rather than the glass one I had been using and no longer have need of glue sticks. I'd usually get a few/several prints off one or two applications but after a while the buildup affected adhesion and cleanup wasn't quite as easy as swiping the glue ON was.

Scritto da: Stephen

Works great!

I’m brand new to 3D printing (literally used these glue sticks for my first print ever), so take this review for for what it’s worth. I’ve been printing ABS without a heated bed on my cube 3 and haven’t had any problems with warping or adhesion using this glue. I’m not claiming everyone will have the same results as me, but so far this has worked great (Note: I’m also NOT printing long flat pieces which I’m guessing will still warp?). This goes on purple, dries clear, and is easy to clean off when my prints are done. Definitely recommended!

Scritto da: Eko

works good but sometimes the warp can't be stopped I guess

Only glue stick I've used for printing so I don't know how it compares. It works good but sometimes the warp can't be stopped I guess. Works better than hairspray on glass. Lasts a long time. About 1 stick a month.

Scritto da: chris

Works great

What else can i say? It just works.

Scritto da: Kieran

Awesome stuff - Just a tad expensive

For 3D Printing; Awesome product, one of the best glues I’ve had. It just sucks that it is slightly expensive compared to other brands, but well worth it. Originally I used to use Elmers Xtreme glue stick which was great but wasn’t up for very small prints with very low surface areas. Used on the Prusa MK3S+ on a textured bed, and on an heavily modified Ender 3 with a glass bed. I would double up on this stuff as you will go through it quickly if you do a lot of printing.

Scritto da: Amazon Customer

Great product

The Dremel glue sticks work very well on my 3D printers. They almost work to well. Sometimes it is very difficult to get the print off of the build bed using the Dremel glue stick. If you have warping on your 3D prints this product will hold the build tight to the build bed. I use the glue stick on top of my polyamide tape (Kapton tape). Water takes the glue stick off of the build and bed with ease.

Scritto da: Amazon Customer

Not worth the money

Honestly, dollar store brand has the same effect. There's little to no adhesion to a 3D printer bed, and it dries out almost instantly. Supposedly works on a heated bed, but after adjusting temps drastically, I don't see how it does. Print slides around for fun on the bed, and ended up just going back to painter's tape after hours of trial and error with the glue. Definitely don't recommend using this for 3D printing, probably more effective to just sniff it.

Scritto da: Joshua H.

Great for 3D Printers.

Was looking for a way to get better adhesion for my 3d printer and heard glue worked well i was little iffy to try it but figured nothing else was working so why not, tested this out and haven't had any adhesion issues since, its also extremely easy to clean which great highly recommend.

Scritto da: Yuri Stella Kim

Yes it works but just buy elmer's purple glue stick

Yes it works but just buy Elmer's purple glue stick I bought this and Elmer's glue to see if there's any difference and there isn't lol. and this is 4 times the price of elmer's.