Steinel GF 23 Stick di colla per legno, bastoncini lunghi 1/2 x 12" per la maggior parte delle pistole per colla standard, borsa con 15 bastoncini, potente adesivo speciale per l'incollaggio del legno, 04034 Legno 15 bastoncini

Brand:Steinel

3.5/5

€
53.33

Stick di colla per legno GF 23, 1/2 x 12, 15 stick per un sacchetto da 1 libbra, formulato per funzionare al meglio su assemblaggi in legno

Quantity

Aggiungi al carrello Compra subito

EAN: 0018139040347

Categories: Arti, artigianato e cucito, Creazione, Forniture artigianali, Adesivi, Pistole e bastoncini per colla artigianale, Bastoncini per pistola per colla,

La colla è priva di solventi, quindi atossica. Facilmente rimovibile all'aria calda. Dispone di un Universalklebstoff particolarmente potente per l'incollaggio di diversi materiali. Mantiene dopo 10 secondi, può contenere in soli 2 minuti. Potente adesivo speciale per l'incollaggio di assemblaggi in legno.

Item model number	04034
Manufacturer	Steinel
Package Dimensions	11.6 x 4.8 x 1.1 inches; 1 Pounds

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Carl

Great so far for use on plastics.

What I like is the performance of the adhesive on a plastic to plastic bond. I used it to repair a Halloween animatronic that I've had since 2008. It's the first adhesive that has worked effectively on it. This same adhesive was not available locally. What I didn't like was the delivery. It was purchased on November 1st and indicated next day delivery. There's no minimum charge for this next day delivery. It only arrived today, and I really needed it yesterday as promised. The glue sticks are a little pricey, but considering the value of the animatronic, it was well worth it.

Scritto da: Michael Matrix

Not like the other glues you know

I bought a special 300W gun jus to be able to use this glue, it is that good.

Scritto da: The Crafty Consumer

Tightly bonds polypropylene and everything else!

I have used these glue sticks in a Surebonder PRO8000A (a beastly 180-watt glue gun) to bond sheets of corrugated polypropylene (Coroplast) to EVA foam and polypropylene to itself. The adhesion between the glue and the polypropylene sheets is so strong that the plastic stretches before the glue detaches. Likewise, the EVA foam tears before the glue fails. I have also used this glue on wood, glass, and metal, and it outperforms the typical all-purpose glue sticks in every case. This glue needs to reach very high temperatures (380 degrees F) for proper tack, so you will need an appropriate glue gun. Also, if your work has a large thermal mass, you may need to preheat it with a heat gun so it doesn't cool the glue down toon much before it has time to set. Furthermore, for some plastics, you may need to use sandpaper or heat and solvent to prepare the surface for bonding. As others have noted, this glue is just rebranded tecbond 260, so if you can find that product cheaper elsewhere (like ebay), go for it. When applied properly, this glue bonds low-surface-energy plastics better than most plastic-weld epoxies, and it's so much easier and quicker - so it's highly recommended in my book.

Scritto da: D. Bernhard

Strong and predictable bonding

This is the best glue stick material I've ever used for achieving strong bonds. I find it easy to produce the amount of hot glue I want to apply. I consider the cooling time to hardening to be about medium, which is what I prefer - long enough to give me time to spread or shape the glue but not too long. I get minimal dripping from my gun when I have it heating on standby. I've now consider this my "go to" hot melt glue and I've purchased my second batch of sticks. My only caution to other buyers is to take careful note the shipping time - I waited months for my second batch to be delivered to me.

Scritto da: BoJonJovi

This set up would work great for hail dents in a car

I bought a motorcyle that had a dented tank. I got a pan head bolt and a PVC pipe jig. I put the hot glue on the pan head bolt and put it on the dent. I then put some stiff foam down, the pvc jig, a pice of wood with a hole it then bolted the contraption down with a not. As I tightened it, it pulled the screw up and the dent. It took several times to get it where I wanted it. I also learned the hard foam is necessay or the PVC can put additional dents in the tank. Anyway, it is strong enough to pull dents. This set up would work great for hail dents in a car. I suspect one pull would do it. My dents were big 2-5 inches and the big ones creased. So hail would would simple with this 5 dolla set up.

Scritto da: Melita A. Curphy

Bad quality batch?

Beware! The last batch of sticks that i bought resulted in poor adhesion and not the bond strength i rely on with Steinel's high heat glue. As i went through this pack of sticks i began to wonder if they had changed the formula? Was i not scuffing my surfaces enough? The change was so drastic! Things peeled right off. I took my costume pieces to the desert for an event and watched parts drop off in the heat...never a problem before in my 10 years of using this brand. The name on the side of my last stick says TecBond which seems to be on other examples of the Steinel 260 i can find online but whatever this glue is, it's not as good as it used to be. Bummer.

Scritto da: Hannah Ulloha

Strong Bond!

I was attempting to put together a foam costume and absolutely nothing would stick to the high density foam! I was at my wits end!! After doing some research I found this glue and thought "What the heck?!" the only other alternative was starting from scratch with a different medium... THIS STUFF WORKS! I was so glad to have finally found a product that works! It's not only hot but very sticky! One warning: It dries a lot faster than regular high-temp hot glue. So you have a shorter window to glue down your item. Once it's stuck it's stuck good!

Scritto da: kaz

Worth the price.

Yeah these things are pricey for glue sticks, but I'd say they're easily an order of magnitude more adhesive than that white stuff. Also, you get a lot. It was Amazon's helpful reminder that I'd purchased this exact item just over a year ago which prompted me to write a review. So a fifteen-count of foot-long sticks is a years worth of gluing anything within reach of an AC outlet, and friend, that is a LOT of things. I am continually amazed at the materials this tenacious goo is able to bond nigh-instantaneously. In fact, it's my go-to solution for things that can't be welded. A slight caveat, it doesn't dry clear by any means. The color of the stick in the product image is, logically enough, about the color of the cooled glue. If that worries you, then by all means go purchase an inferior stick-based adhesive.

Scritto da: Rick C

Perfect

Excellent pricing and work perfectly

Scritto da: steve

Good

Just what I expected , work great