sourcing map A15081000ux0463 M6x100mm acciaio inossidabile doppia estremitÃ filettata vite prigioniera bullone (confezione da 5)

Name: sourcing map A15081000ux0463 M6x100mm acciaio inossidabile doppia estremitÃ filettata vite prigioniera bullone (confezione da 5)
Brand: uxcell
SKU: 0712662221777
Price: 37.47 EUR
Availability: InStock

Brand:uxcell

3.7/5

€
37.47

Materiale in acciaio inossidabile 1.304. 2. Progettato con doppia estremità. 3. Componenti di fissaggio, elementi di fissaggio industriali e da costruzione.

Quantity

Aggiungi al carrello Compra subito

EAN: 0712662221777

Categories: Prodotti industriali e scientifici, Chiodi, viti e elementi di fissaggio, Set di assortimento di dadi e bulloni,

Vite standard: M6x100mm. Passo della filettatura: 1 mm; Lunghezza totale: 100 mm/4. M6x20mm/0.24x0.79(D*Min L); Colore principale: tono argento. Peso: 87 g; Contenuto della confezione: 5 pezzi x bullone a doppia estremità. Materiale: acciaio inossidabile 304; Nome prodotto: bullone a doppia estremità.

Country of Origin	China
Is Discontinued By Manufacturer	No
Item model number	a15081000ux0463
Manufacturer	Dragonmarts - BISS
Product Dimensions	3.94 x 0.24 x 0.24 inches; 3.17 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Jim S.

Perfect replacement for golf cart

These studs were a perfect replacement for 1999 club car DS carburetor studs. Perfect length.

Scritto da: Tyler A.

Worked as intended

I bought these to help me replace a stator gasket and cover on my motorcycle. This is the same thread and size as the screws that hold the cover in place, so after removing the old stuff I used these to help hold the gasket in place and guide the stator cover back into proper alignment without worry. I can see them being useful for other things as well, but that's the reason why I bought them and they worked great for that purpose.

Scritto da: Leif

Center part between threads is a little thin

I bought these to replace head bolts on a Honda Hobbit moped. I wanted to change to studs that would remain in place when I took the cylinder off instead of taking a whole bolt out of the case. I ended up not using them because the center part between the threads is thin. Instead of having threads cut into one diameter rod, the threads themselves are larger than the unthreaded part.

Scritto da: WCR

Small Engine maintenance hack.

I always had an issue with small engine gaskets, insulators, dams, carburetors and air intake alignment and starting the mounting bolts without something shifting. Use these studs if they fit to mount all the component correctly on the studs. Holding the components in alignment you can switch out the studs for the specified bolt one at a time and it saves you time and stress and possible damage to thin gasket material. I use these studs to my maintenance and overhaul work on Honda and BS small engines for my yard equipment. The quality is very good and the stainless has held up to exposure to water and cleaning chemicals very well.

Scritto da: J. Smith

I bought ten rods-- two packages of five. Between ...

I bought ten rods-- two packages of five. Between the two packages, four rods had threads cut to 30-31 mm, while the other six had threads cut to only 24 mm. Advertised thread length is 34 mm. Otherwise, they're straight, 100 mm long, M6x1.0, and stainless.

Scritto da: Raul

Able to use these stud screw to fix my IKEA bed

Good product at a great price.