Rain Bird TC/1PKS Tagliatubi per irrigazione a goccia, taglia tutti i tubi di gocciolamento fino a 3/4" Tagliatubi combinato - 1/4" e 1/2"

Brand:Rain Bird

3.4/5

43.87

DESCRIZIONE PRODOTTO Rain Bird TC/1PKS Tagliatubi per irrigazione a goccia, taglia tutte le misure di tubi a goccia fino a 3/4”. Questo tagliatubi di alta qualità taglia facilmente tubi di gocciolamento di tutte le dimensioni per soddisfare le esigenze specifiche del tuo sistema di irrigazione e irrigazione. Fornisce tagli netti senza bordi frastagliati o schiacciamento dei tubi. La lama in acciaio inossidabile affilata come un rasoio taglia in modo rapido e pulito per installazioni più rapide. Il design unico fornisce due pozzetti di dimensioni diverse (uno per tubi da 1/2 a 3/4 e uno per tubi da 1/4) fornendo più leva quindi è necessaria meno forza per tagliare qualsiasi tubo! Costruzione leggera ma robusta. L'impugnatura ergonomica funge anche da strumento di scavo per seppellire i tubi nel pacciame o nel terreno sciolto. Ottimo per tagliare tubi LPDE, tubi in vinile, tubi per irrigazione a goccia, tubi flessibili per immersione, tubi in vinile trasparente (CVT) e altri tubi morbidi fino a .750" di diametro esterno. Il colore viola altamente visibile consente di vedere facilmente lo strumento su erba, terra, corteccia, ecc. La pratica busta di plastica contiene (1) tagliatubi. La lama di ricambio può essere acquistata separatamente: PPC-200XBLD. Rain Bird "L'uso intelligente dell'acqua" DAL PRODUTTORE Rain Bird Corporation è un'azienda privata fondata nel 1933 durante il boom agricolo in California. Siamo riconosciuti come il produttore e fornitore n. 1 al mondo di prodotti e servizi per l'irrigazione. Con uffici vendite in tutto il mondo; offriamo oltre 4.000 prodotti per l'irrigazione a risparmio idrico in più di 130 paesi. Sin dall'inizio, Rain Bird ha prodotto e offerto la più ampia gamma del settore di prodotti per l'irrigazione di alta qualità per: fattorie, campi da golf, arene sportive, complessi commerciali e abitazioni. Negli ultimi 80 anni Rain Bird ha ricevuto più di 450 brevetti in tutto il mondo. Compreso il primo per l'irrigazione nel 1935 per il nostro originale irrigatore a percussione (brevetto USA n. 1.997.901) che ha rivoluzionato la produzione alimentare agricola e ha inaugurato una nuova era nell'irrigazione in tutto il mondo. Nel 1990 questo irrigatore a impatto originale è stato designato come punto di riferimento storico dall'American Society of Agricultural Engineers. I nostri prodotti coprono tutti gli aspetti dell'irrigazione... timer/regolatori, irrigatori rotanti pop-up, irrigatori a testa di spruzzo pop-up, ugelli per irrigatori, valvole di irrigazione, irrigazione a goccia, drenaggio e molto altro. Questi prodotti sono stati tutti scelti e installati in tutto il mondo nei più grandi e prestigiosi progetti per l'irrigazione residenziale, commerciale, agricola e dei campi da golf. Rain Bird è impegnata in The Intelligent Use of Water™ con il nostro impegno che si estende oltre i prodotti all'istruzione, formazione e servizi per l'industria e la comunità. La nostra eredità è progettare e produrre solo prodotti di altissimo valore e qualità. Siamo grati di aver ricevuto numerosi premi di riconoscimento da molti dei nostri stimati partner. Rain Bird “L'uso intelligente dell'acqua

Utilizzare per un'installazione rapida. Impugnatura ergonomica. Taglia il tubo di gocciolamento. Lama in acciaio inossidabile. Il colore viola altamente visibile consente di vedere facilmente lo strumento su erba, terreno, corteccia, pacciame, ecc. Fornisce un'installazione del sistema di gocciolamento più rapida e semplice. Dispone di pozzetti incassati che richiedono meno leva e forza. Lama in acciaio inossidabile affilata come un rasoio e impugnatura ergonomica. Funziona su tutte le marche di tubi di irrigazione a goccia da 1/4 a 3/4. Utensile da taglio leggero di alta qualità; esegue tagli netti senza bordi frastagliati o schiacciamento dei tubi.
Country of Origin Canada
Customer Reviews 4.4 4.4 out of 5 stars 1,442 ratings 4.4 out of 5 stars
Is Discontinued By Manufacturer No
Item model number TC/1PKS
Item Weight 1.6 ounces
Manufacturer Rain Bird
Product Dimensions 20.5 x 20.5 x 4.25 inches

3.4

13 Review
5 Star
69
4 Star
14
3 Star
8
2 Star
3
1 Star
6

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Sandra
made my job easier
it made my job easier
Scritto da: Angel Douglas
Very small so dont lose it, worked good for what It was needed for
I only worry about losing this, but i put it on a key ring and will be fine. Worked like a charm to make smaller to larger holes in seconds. I needed this exact tool for the job.
Scritto da: JS
Slow shipping.
Works great
Scritto da: Bàká Hään
Useful tool
We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this tool in order to push the barbed end of the emitters into the 1/2 in tubing. + Good price. + Very easy to use. Snap the colored side of the emitter into the middle of this tool. Then use the leverage of the tool to push the black barbed end of the emitter into the hole you punched into the 1/2 in tubing. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.
Scritto da: Bàká Hään
Useful tool
We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this took in order to connect the 1/2 in tubing with the Tee and elbow fittings. + Good price. + Very easy to use. Use this to flare the ends of the 1/2 in tubing. Then snap the fitting into the tool and use it to push the tubing onto the barbed end of the Tee or Elbow. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.
Scritto da: Flamsteed
I needed his
I had been using a heat gun to soften the tubing end before inserting the fittings This tool works and makes the job so much easier…and I don’t have to run an extension cord.
Scritto da: JNK
Blade works great, hole punch not so much
The blade part works great for cutting irrigation hose (I've used it on both 1/2 and 1/4 inch to equal effect), but that's not really hard as any scissors would do the same. I mostly got this to have the cutting and hole punching on one tool, but unfortunately, I have yet to have the hole punch work well. Perhaps I'm not doing it right, but if so, then how this should be used must be very convoluted.
Scritto da: Saeng Fio Chao
Great handy tool
With all others tool, I find this is the best one
Scritto da: Ed
Don't forget the tool!
I ordered a RainBird drip irrigation system, part by part, to water my vegetable garden (with large raised beds). One of the challenges we face is that we move the vegetables from bed to bed each year, and so it used to take a lot of time to adjust and rebuild our old system as the plants changed places. With my new RainBird system I was able to set up a single long 1/4" drip tubing (with 6" hole spacing) for each bed so that it can be laid out quickly around all the plants, the closer the spacing the more water etc.. The backbone of the system is a 1/2" main line where I used a bunch of T's and L's to smoothly run the main pipe under the soil, popping up a branch over the edge of each raised bed. I used 1/4" barbed coupling fittings (get the purple RainBird tool for these!) to connect the 1/4" drip tubing to the 1/2" main line branches. All connections went together really well, the pieces are consistent, I have not found any leaks, and best of all I was able to install on my own in under 2 hours, including burying the main line pipe! I am very satisfied, and would strongly recommend this product.
Scritto da: Annette Dreger
Very easy to use
Worked as excepted--makes nice straight cuts and proper sized holes for the barbs!!
Scritto da: Amazon Customer
retour imposible
J'ai voulu le retourner car il venait déjà avec le kit rainbird mais le vendeur il ne voulait aucun retour de cette item
Scritto da: DP Kindle Customer
It works!!
Love!! It works giving you more leverage to insert the tiny barbed connector and emitters!! Saves my fingers, well worth the price!!
Scritto da: rferraro
Product description is misleading
I bought this tool to use with 1/4 barbed fittings as is indicated in the amazon.ca description. The barbed fitting end DOES NOT fit into the hole so that you can insert the other barbed end into the hose. I'd like to return it bit this item is not returnable for some reason. Useless for me....

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart