Rain Bird BE50/4PK Raccordo a gomito spinato universale per irrigazione a goccia, adatto a tutte le misure di tubi gocciolanti da 5/8", 1/2", .700", confezione da 4

Brand:Rain Bird

3.7/5

22.73

DESCRIZIONE PRODOTTO Rain Bird BE50/4PKS Raccordo a gomito spinato universale per irrigazione a goccia, adatto a tutte le misure di tubi gocciolanti da 5/8, 1/2, .700, confezione da 4. Questo gomito spinato universale è progettato per collegare rapidamente e facilmente due lunghezze di 1/2 tubo antigoccia a forma di L. Le punte di alta qualità afferrano tutte le marche di tubi antigoccia da 5/8, 1/2 e .700 creando una connessione rapida, sicura e a prova di perdite che rimane in posizione stagione dopo stagione. La scelta perfetta per riparare o estendere i tubi in un sistema di irrigazione a goccia. Il design unico della punta riduce la forza di inserimento e il colore naturale si fonde bene con tutti i toni della terra. Costruito con materiali resistenti ai raggi UV e agli agenti chimici altamente durevoli per garantire una lunga durata. Pressione di esercizio consigliata: da 0 a 50 psi. Il comodo sacchetto di plastica contiene (4) gomiti. Rain Bird L'uso intelligente dell'acqua. DAL PRODUTTORE Rain Bird Corporation è una società privata fondata nel 1933 durante il boom agricolo in California. Siamo riconosciuti come il produttore e fornitore n. 1 al mondo di prodotti e servizi per l'irrigazione. Con uffici vendite in tutto il mondo; offriamo oltre 4.000 prodotti per l'irrigazione a risparmio idrico in più di 130 paesi. Sin dall'inizio, Rain Bird ha prodotto e offerto la più ampia gamma del settore di prodotti per l'irrigazione di alta qualità per: fattorie, campi da golf, arene sportive, complessi commerciali e abitazioni. Negli ultimi 80 anni Rain Bird ha ricevuto più di 450 brevetti in tutto il mondo. Compreso il primo per l'irrigazione nel 1935 sul nostro originale irrigatore a percussione (brevetto USA n. 1.997.901) che ha rivoluzionato la produzione alimentare agricola e ha inaugurato una nuova era nell'irrigazione in tutto il mondo. Nel 1990 questo irrigatore a impatto originale è stato designato come punto di riferimento storico dall'American Society of Agricultural Engineers. I nostri prodotti coprono tutti gli aspetti dell'irrigazione... timer/regolatori, irrigatori rotanti pop-up, irrigatori a testa di spruzzo pop-up, ugelli per irrigatori, valvole di irrigazione, irrigazione a goccia, drenaggio e molto altro. Questi prodotti sono stati scelti e installati in tutto il mondo nei più grandi e prestigiosi progetti per l'irrigazione residenziale, commerciale, agricola e dei campi da golf. Rain Bird si impegna per The Intelligent Use of Water™ che va oltre i prodotti all'istruzione, alla formazione e ai servizi per l'industria e la comunità. La nostra eredità è progettare e produrre solo prodotti di altissimo valore e qualità. Siamo grati di aver ricevuto numerosi premi di riconoscimento da molti dei nostri stimati partner. Rain Bird “L'uso intelligente dell'acqua

Confezione da 4 connettori a gomito da 1/2 spinato in un comodo sacchetto di plastica. Consigliato per pressioni di esercizio da 0 a 50 psi. Costruito con materiali resistenti ai raggi UV e agli agenti chimici altamente durevoli per garantire una lunga durata. Compatibile con tutti i tubi di irrigazione a goccia 1/2 che misurano da 0,580 a 0,700 di diametro esterno. Consente la creazione di un layout personalizzato per la tua area di semina. Tubi di presa con estremità spinate per una connessione sicura a prova di perdite. Connettore per l'uso con tubi di irrigazione a goccia da 1/2 e 5/8.
Country of Origin Mexico
Customer Reviews 4.6 4.6 out of 5 stars 3,592 ratings 4.6 out of 5 stars
Department Teak
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Item model number BE50/4PKS
Item Weight 0.104 ounces
Manufacturer Rain Bird
Product Dimensions 0.9 x 0.9 x 2.15 inches

3.7

13 Review
5 Star
77
4 Star
15
3 Star
5
2 Star
1
1 Star
2

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Reed Lloyd
Easy to install
This 1/2 inch Tee connector works better than most of my previous purchases and best price, too. It is much easier to install as well. Be sure to give yourself a little longer tubing at the joint to secure the installation. Recommend it.
Scritto da: Howard
Just what I needed
I brought our old hydroponic drip system back to life. This valve helped make things easy, allowing me to control the drip to just the flow I wanted.
Scritto da: JCKS
Work perfectly
These are fantastic. They do not leak after 2 years. No deterioration, no leakage.
Scritto da: Jan
Works Great
Easy to use ends the soaker line.
Scritto da: Dan
Only Rainbird products for me
Added to vegetable beds so I could turn on water only for actively growing beds. Also able to dial volume of water for the drip lines.
Scritto da: jweit
good for what I needed
Used to control water flow for flushing heater core while using the flushing tool.
Scritto da: Chris
Great for regulating fountain flow.
I bought a wall-hanging fountain that has an issue. The water, which comes out in 3 streams, is too strong causing splashing and noise. After several failed attempts to fix it, I thought of slowing down the water. I bought some 1/2" flexible tubing at Home Depot and this valve. I cut a piece of the tubing and installed the valve between the pump and fountain intake tube. After adjusting the valve to slow the flow, it worked pretty well. Now I'm happy.
Scritto da: J. Starmer
Drip Irrigation Project!
This review is for a variety of products all in one. This spring (2013) my wife and I put in 2 4'x20' raised bed gardens in the back yard for growing flowers and veggies. We live in Tennessee and the middle of the summer is hot and dry. I wanted a way to keep the plants watered and decided to convert a "spray zone" of our irrigation system to drip. I set up the garden with short rows that run the width of the boxes. I designed the garden with lots of short rows that run the 4' width of the boxes. Imagine a railroad track. The rails are the "feeder lines" that run the length of my setup, and the drip lines are the railroad ties that cut across the width of the garden (parallel with the rows of plants). I needed "feeder line" to bring the water to the drippers, and a variety of connectors to put it all together. I planned it all out on paper first, and then made sure I purchased enough parts. I purchased the following products for my setup: Rain Bird Landscape Dripline System 1/2-Inch Emitter Tubing With 18-Inch Spacing - 100-Foot Roll (5 stars) Rain Bird BT50-4PK Landscape Dripline System 1/2-Inch Barbed Tees, 4 Pack (5 stars) Rain Bird BE50-4PK 1/2-Inch Barbed Elbows (5 stars) Rain Bird EC50-Rain Bird GS50-10PK Landscape Dripline System 1/2-Inch Galvanized Wire Secures, 10-Pack (4 stars) 2PK Landscape Dripline System 1/2-Inch End Closure Fittings (5 stars) Rain Bird Landscape Dripline System Spray Head To Drip Connection Kit (5 stars) Rain Bird T63100-BULK 1/2-Inch 100-Feet Landscape Dripline System Blank Tubing Roll (5 stars) These parts were all high quality, and I am extremely pleased with the setup. I cut all the tubing to size and layed it all out prior to putting it all together. It is very difficult to fit the tubing over the barbs, but once on it stays in place and doesn't leak. My hands ached after putting a bunch of the tubing together, so I ended up using leather work gloves which made things go a lot better. A few things to note: 1) I don't have a rainbird setup, and this kit fit in great with my existing irrigation system. 2) The tubing is a bit stiff and can kink easily, but works very well, so be careful when connecting things. 3) The tubing and barbs are not the same inner diameter as stuff you can get at plumbing supply or home improvement centers. That means you can't mix and match, which is ok with me. 4) I used some teflon plumbers tape when attaching parts that screw in.
Scritto da: Ed
Simple and Effective
I ordered a RainBird drip irrigation system, part by part, to water my vegetable garden (with large raised beds). One of the challenges we face is that we move the vegetables from bed to bed each year, and so it used to take a lot of time to adjust and rebuild our old system as the plants changed places. With my new RainBird system I was able to set up a single long 1/4" drip tubing (with 6" hole spacing) for each bed so that it can be laid out quickly around all the plants, the closer the spacing the more water etc.. The backbone of the system is a 1/2" main line where I used a bunch of T's and L's to smoothly run the main pipe under the soil, popping up a branch over the edge of each raised bed. I used 1/4" barbed coupling fittings (get the purple RainBird tool for these!) to connect the 1/4" drip tubing to the 1/2" main line branches. All connections went together really well, the pieces are consistent, I have not found any leaks, and best of all I was able to install on my own in under 2 hours, including burying the main line pipe! I am very satisfied, and would strongly recommend this product.
Scritto da: Jim Anderson
Works as it should
I lost the first one I bought last year, so I purchased the exact same one this year, as I liked how it works.. Not much to say about it , controls water flow off and on , and anywhere in between.. I used this between my water fountain pump and my water fountain, as the pump put out too much pressure , so I had to reduce it down for the proper flow.
Scritto da: iseeinblackandwhite
Works great to join my 1/2 inch tubing to my 5/8 inch tubing.
A bit of a tight fit on the 1/2 inch tubing but I heated the tubing slightly with a heat gun to make it a bit more pliable and it works great. A hair dryer would probably work too as you are just warming the tubing up slightly. These fittings are far superior to the fittings that go on the outside of the tubing. Happy with purchase.
Scritto da: Chad
To expensive
The product works fine. Double the price of other ones.
Scritto da: Amazon Customer
Fits nicely
Very good, tight, and easy to install into my 1/2 inch low pressure garden irrigation system. No leaks at all and very EASY to push into the tubing.

Prodotti correlati

hot
Spina Raindrip 646050B, nera
3.7/5

€ 24.35

Spina Raindrip 646050B, nera
3.7/5

€ 24.35

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart