0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

Prodotti Safco Supporto per stampante/fax da scrivania, finitura con verniciatura a polvere grigia, ruote girevoli per mobilità grigio

Brand:Safco Products

3.7/5

€
199.21

DIMENSIONI DEL PRODOTTO. Dimensioni complessive del prodotto: 19 L x 16 P x 13 1/2 A. STOCCAGGIO BONUS. Il ripiano inferiore offre spazio extra per riporre carta, cartelle, cataloghi e forniture per ufficio. MOBILITÀ FACILE. Quattro ruote piroettanti consentono un facile spostamento; due ruote si bloccano per mantenere stabile il supporto. ASSEMBLAGGIO DUREVOLE. Il telaio in acciaio del carrello offre una stabilità eccezionale, mentre la finitura con verniciatura a polvere aiuta a resistere a scheggiature e graffi per un aspetto professionale prolungato. La parte superiore in laminato antigraffio si adatta alla maggior parte delle macchine da ufficio. DESIGN COMPATTO. Safco Under Desk Printer/Machine Stand mantiene stampanti, scanner e fax a portata di mano, ma non sulla scrivania. Il carrello si adatta perfettamente alla maggior parte delle scrivanie, liberando spazio prezioso sul pavimento. Il ripiano inferiore contiene carta, toner o altri materiali di consumo per un rapido accesso.

Quantity
Aggiungi al carrelloCompra subito

EAN: 0073555520637

Categories: Prodotti per ufficio, Forniture per ufficio e scuola, Accessori da scrivania e organizzatori di spazi di lavoro, Piattaforme, supporti e scaffali, Supporti per stampante,

DIMENSIONI DEL PRODOTTO. Dimensioni complessive del prodotto: 19 L x 16 P x 13 1/2 A. STOCCAGGIO BONUS. Il ripiano inferiore offre spazio extra per riporre carta, cartelle, cataloghi e forniture per ufficio. MOBILITÀ FACILE. Quattro ruote piroettanti consentono un facile spostamento; due ruote si bloccano per mantenere stabile il supporto. ASSEMBLAGGIO DUREVOLE. Il telaio in acciaio del carrello offre una stabilità eccezionale, mentre la finitura con verniciatura a polvere aiuta a resistere a scheggiature e graffi per un aspetto professionale prolungato. La parte superiore in laminato antigraffio si adatta alla maggior parte delle macchine da ufficio. DESIGN COMPATTO. Safco Under Desk Printer/Machine Stand mantiene stampanti, scanner e fax a portata di mano, ma non sulla scrivania. Il carrello si adatta perfettamente alla maggior parte delle scrivanie, liberando spazio prezioso sul pavimento. Il ripiano inferiore contiene carta, toner o altri materiali di consumo per un rapido accesso.
Assembly required No
Batteries required No
Brand Safco Products
Color Grey
Compatible Devices Desktop
Compatible Phone Models Desktop, Printers
Country of Origin China
Customer Reviews 4.6 4.6 out of 5 stars 3,218 ratings 4.6 out of 5 stars
Department Wire Stands
Included Components Wheels
Is Discontinued By Manufacturer No
Item model number 5206GR
Item Weight 17 pounds
Manufacturer Safco Products
Mounting Type Wheel Mount,Table Mount,Floor Mount,Tabletop
Number of shelves 1
Product Dimensions 16 x 19 x 13.5 inches
Warranty Description Manufacturer limited lifetime.

3.7

13 Review
5 Star
78
4 Star
13
3 Star
5
2 Star
2
1 Star
3

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: P. Dinklage
Great for Under-Desk!
I loved my first one that I've had for years so much that I bought another one when I got a new wide-format printer. The original one holds a hanging file folder box and the shelf below it usually holds reams of paper, but currently hides a Mother's Day present. Strong and sturdy with great casters. Easily assembled. No complaints. Highly recommend. The top shelf is exactly 13" high. The clearance between the bottom of the support of the top shelf and the top rail of the bottom shelf is exactly 5-11/16".
Scritto da: E. Vasiliou
Great for a printer stand!
I use it for my second printer! Has storage under the top and is sturdy!
Scritto da: GMiami
Good product with a couple of hiccups
I believe this is a decent product although I had the same issues that some other reviewers had. To start with, the instructions (in the form of 4 drawings) are fine and the quality of the product is good, not great, just good. Dimensions, color (white), and materials were exactly as they were advertised. The top is laminate, which on one side was not glued. Not a big issue, I could fix that. The full assembly took me 90 minutes, of which 75 minutes were dedicated to figure out what to do with the casters. Same as others, I could not fully screw most of them. I did not want to damage any of the screws so I got to a compromise: I partly screwed all of them, to the same height, and it turned out fine. However, it took me a while to get to this. The drawer is very good to keep a few things inside (pens, stapler, etc) and the bottom panel to place the printer paper. I need to lock the two front casters to open the drawer, otherwise I would be moving the stand towards me and not opening the drawer. Despite the disappointment about the assembly, I am happy about this product.
Scritto da: gatamadriz
Great option for a small office
I needed a super low printer stand with a shelf for a ream of paper to roll under my desk when not in use. This worked splendidly, leaving the desk top tidy.
Scritto da: D
Doubles as a sewing cart p.s. Use a power drill
It’s definitely made cheaply and I wouldn’t have bought it if it wasn’t on sale or the cheapest I could find but it definitely works just fine. Using a power drill definitely helped with the screws (they were messed up in the process of drilling). I think the wood part is what makes this cart expensive since it’s quite heavy so I’m assuming it’s solid wood and not like ikea. I bought this for my sewing machine and crocheting material so I’m not mad at it. It definitely looks better once it’s built and you’re further away.
Scritto da: BKraft
The dimensions in the description are incorrect
I spent a lot of time researching this shelf. I was looking for something to hold materials for a 3D Laser Printer. Materials for this are just over 20” in length. Most shelves I was seeing were around 20” but the legs clearly overlapped the storage space so I knew they wouldn’t work. The description for this item clearly says the Upper Deck measures “21”W x 16”D”. While it is 16” deep, the deck is only 19.5” wide…. A full 1.5” smaller than what the description says. It is 21” wide side to side if you include the tubular legs on each side of the shelf. The tubular legs, IMO, are not part of the “Upper Deck” so their measurement is misleading. Let’s talk about the drawer for a minute. They specifically say the drawer is “21”W x 16”D x 3 1/2” H”. These measurements are flat out wrong across the board. There is nothing misleading here. Just wrong. The drawer is 19.5”W x 15.75” D x 3” H. Those are exterior dimensions as well, so the actual usable footprint of the drawer is only 18.5” W x 15.25” Dx 2.75” H. This is clearly NOT what it says in the description and would have been crucial information to know in making my decision on this product. Luckily, I only have a few materials that are 21” wide. Most of my stuff is 19” wide, so I was still able to use the shelf, I just have to slide the 21” materials in from the side on the lower shelf to get them to fit. (Which is not where I wanted to use them - but this item is large and heavy to consider shipping back at this point.) My other issue with this shelf…. I have a construction background. I always am irritated by designs that clearly don’t incorporate teh assembly into the design of the product. Just a personal pet peeve, but this item clearly could be designed to make the construction easier. That said, it isn’t terribly difficult, just take your time. The final product is structurally strong. It has a nice finished look and the rollers, while slightly cheap feeling, move easily and well making the overall piece quite maneuverable. This unit will work for me. I probably would have given it 4 stars if the measurements weren’t clearly wrong. I feel that is something important when making a decision on a product.
Scritto da: Picky CO Mom
perfect for under a dorm bed
Needed something small to keep a printer off the floor in the dorm. Fits nicely under a partially lofted bed. Shelf is great for paper and ink. Top is not the greatest laminate quality but it works.
Scritto da: Ethan
Great for printer
Perfect space for a printer and paper, with a pull out drawer for other supplies. Fits neatly under my desk, with the printer's height added (though I keep it off to the side). We ran into one screw that wouldn't tighten when building it, so I guess the build quality isn't perfect. But it stays together fine without it, and feels sturdy.
Scritto da: shodo_lover
Just what I wanted
Really liked that this printer stand was small and neat but extremely sturdy - a solid, heavy top plus a heavy duty metal mesh shelf. Just big enough to hold a hefty stack of paper and my Epson inkjet printer. Wheels roll very well also. My only criticism is that the plastic sleeves that are so important for assembling the stand are a bit flimsy. But put them on carefully and it all works. Overall, very happy with this product. Purchased through the Warehouse Deals and no evidence of damage anywhere on the printer stand.
Scritto da: J.Lo
STURDY AND WELL MADE
We bought this to fit into a small understairs cupboard with a larger heavy printer on the top so we could wheel it in and out easily. We were a bit concerned the trolley might be too flimsy but far from it - it was sturdy and very easy to put together and more than adequate for the task. Would fit easily under a desk.
Scritto da: ZZLo
Compact yet practical
This is a solid stand, easily capable of holding commercial printers that weigh in over 25Kg. I tested it out beforehand, sitting on it, so it definitely can stand up to 70Kg or more. Of course, with a larger commercial printer, it will no longer fit under a desk. With the printer, it easily rolls around on its casters. The unit was easy to assemble, and took me about 10 minutes all told, including unpacking the parts and figuring out how to put it together. It helps that I could figure the character 'up' in Chinese that was printed on to the plastic sleeves! It might take you a bit longer otherwise...
Scritto da: Adrian Durrant
Good solid stand
I'm using mine for a vinyl record turntable so I can store it under my piano. It's sturdier, heavier and stronger than I expected. More than enough for what I'm using it for. It would take quite a lot of weight. Handy shelf underneath.
Scritto da: Chris
Low profile for larger printers
This desk is the best if you have a larger multi printer. I have my printer next to my desk in the living room and wanted a desk that would hide the printer and not be higher than my desk. This fits perfectly. It is very sturdy and can handle fairly heavy printers and it has wheels to move it around. Very happy with my purchase and greatly recommended. It also has a shelf at the bottom where you can store your paper or whatever else you need to keep out of sight.

Prodotti correlati

hot
Prodotti Safco Supporto per stampante/fax da scrivania, finitura con verniciatura a polvere grigia, ruote girevoli per mobilità grigio
3.7/5

€ 199.21

Prodotti Safco Supporto per stampante/fax da scrivania, finitura con verniciatura a polvere grigia, ruote girevoli per mobilità grigio
3.7/5

€ 199.21

hot
Safco Products - Supporto per macchina in filo metallico laterale da scrivania con ruote, 3 ripiani, capacità 200 libbre, struttura in acciaio nero e ripiani multifunzionali. Orgaznie casa, ufficio o classe nera a 3 livelli
3.8/5

€ 261.32

Safco Products - Supporto per macchina in filo metallico laterale da scrivania con ruote, 3 ripiani, capacità 200 libbre, struttura in acciaio nero e ripiani multifunzionali. Orgaznie casa, ufficio o classe nera a 3 livelli
3.8/5

€ 261.32

hot
Prodotti Safco Supporto per stampante/fax da scrivania, finitura verniciata a polvere nera, ruote girevoli per la mobilità
3.7/5

€ 166.62

Prodotti Safco Supporto per stampante/fax da scrivania, finitura verniciata a polvere nera, ruote girevoli per la mobilità
3.7/5

€ 166.62

hot
Safco 12,25 pollici di altezza in legno pronto per la casa, l'ufficio, lo spazio di lavoro, impilabile, libreria, unità di archiviazione, organizer, beige, 12,25" di altezza
0.1/5

€ 204.70

Safco 12,25 pollici di altezza in legno pronto per la casa, l'ufficio, lo spazio di lavoro, impilabile, libreria, unità di archiviazione, organizer, beige, 12,25" di altezza
0.1/5

€ 204.70

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu