Prime-Line N 7331 Drive-In Ball Catch w/Strike, 3/4" x 1-3/16", pressofuso, ottonato

Brand:PRIME-LINE

3.5/5

€
26.67

Facile da installare. 1 pollice faccia con labbro. Tensione regolabile. Ottone placcato. Hardware di montaggio incluso. Il fermo a sfera caricato a molla aiuta a mantenere la porta interna incernierata in posizione chiusa. Costruzione pressofusa con finitura in ottone lucido. Per regolare girare la faccia dell'anello sul fermo. Diametro esterno 3/4 pollici x canna lunga 1-3/16 pollici. Utilizzato per tenere in posizione chiusa porte a battente con sistema di chiusura a sfera a scomparsa.

Quantity

Aggiungi al carrello Compra subito

EAN: 0049793073310

Categories: Strumenti e miglioramento della casa, Hardware, Ferramenta per armadietti, Catture,

Brand	PRIME-LINE
Color	Brass
Finish Type	Brass
Item Dimensions LxWxH	0.75 x 1 x 1.19 inches
Material	Diecast
Number Of Pieces	1
Style	Modern

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Amazon Customer

They are working much better with a more reasonable sound

Ordered these to replace several that were failing after several years. The original ones were installed by the interior door manufacturer and were okay but failed after a year or so due to what I think was a very strong spring in the ball assembly. The ball became pitted and gouged the strike plate very noticeably. They also made a loud click when opening/closing. I can't remember seeing black anodized ones so I bought and installed these brass colored ones. They are working much better with a more reasonable sound, none have failed so far and the ball has only lightly marked the strike plate. My only caveat is the strike plate screw holes are not 40 millimeters apart like I remember the paperwork that came with them said and what the old strike plate was too. This strike plate was 42.5 mm apart which the difference was the width of the installing screw; therefore you could not just drill another hole. That said, the outside dimension is the same and will install as a replacement, the screw will go in crooked. BUT, the strike plate doesn't fail, it's the ball assembly in the door. That replaced easily by screwing in the collar a bit and then using a pair of pliers or vise grips to wiggle it out & then a mallet to tap the new one back in. SO, if you're installing for the first time; this is a 5-Star product; if it's a replacement, just replace the ball assembly & toss the strike plate. I'm including a picture of the old (black) plate and new one where I took a felt pen to mark on a piece of paper where the holes on each plate was.

Scritto da: John V

Perfect Replacement

This Ball Catch for doors is a perfect replacement from the older type of design. The ball will stay secured in the barrel (chamber). Excellent quality.

Scritto da: Michael McGarrah

Exactly what it said

Was exactly what it said it was. Installed easily and is working great. I little trouble seeing the initial level but that was my issue not having the right tool.

Scritto da: Michael B. Maxwell

Make sure this is what you want!

I am sure this is a fine product, but if you have a ball catch on your door, and you're replacing it, make sure this is the kind of catch you need. I've attached pictures of the catch my door had (the ball part was missing, hence the need to replace it)--it's NOT compatible with this one. How to tell: the metal frame part (shown from above and below) of the type I need fits down in the hole in the door (shown in the other picture), and is held in place by two screws. I tried to put the one from this order into the hole, thinking the rim might hold it in place--but it simply fell into the inside of the hollow core door. (The metal plate that comes with this one fits on the door frame, I guess--I fooled myself when I saw it in the Amazon page, thinking it was the part that screwed into the door.)

Scritto da: Grouch

Fit perfect to replace broken one

Good stuff

Scritto da: Peter

Good Product

This is a very good and functional item. I bought it to replace similar catches that were physically falling apart. As a replacement part the one aspect overlooked by this product is the need for underlying shims to hold it up to the ideal height. In my case installing the ball detents level with the door frame was too deep due to the previous door installation. I was able to manually raise the ball detent assemblies ~1/8" to 3/16" which greatly helps, but I fear with wear they will slip lower in the previously drilled holes. For that reason I'd recommend a series of ~1" diameter round shims be used to help securely install the detent assemblies at the optimum depth/height for the specific door and door jam installation. Yes, these are designed great for tight fitting doors, but in older houses where the workmanship is not optimal, allowances and work arounds need to be taken into account.

Scritto da: Tom K

Great replacement

Worked on closet door

Scritto da: Trj

It worked for what I needed

It replaced the existing ball stop that had broken. The only difference was the ball seems smaller than the original and does not stickup as far, hence I needed to adjust the stop an 1/8" to get the level of closure equivalent to the original ball stop.

Scritto da: Barkley

Quick replacement for broken one

Old one was busted, spring kept shooting the ball out. Hopefully this one lasts longer. Replacement was quick since i really just need the inside housing with new spring and ball

Scritto da: Galaxy

Five Stars

Works as it should

Scritto da: Richard P Fedorowicz

What I needed for my hallway doors.

Good product, quick delivery, works as expected.