Prime-Line N 6599 Gruppo rullo porta specchio, 1-1/2 pollici, ruota in plastica, cuscinetti a sfera, concavo, fresatura

Brand:PRIME-LINE

3.4/5

25.32

DESCRIZIONE DEL PRODOTTO Questo gruppo rullo per porta a specchio è costituito da un alloggiamento in alluminio estruso ed è disponibile in una finitura in alluminio fresato. L'alloggiamento misura 1-3/4 pollici di larghezza, è spesso 1/2 pollici e alto 3 pollici. Questa staffa per alloggiamento presenta anche una sporgenza estrusa rotonda ed è utilizzata da Monarch Door Company sulle porte con telaio in alluminio della serie "500". La ruota è realizzata in plastica resistente che fornisce un rotolamento regolare, duraturo e silenzioso ed è dotata di cuscinetti a sfera in acciaio e un bordo concavo (scanalato). Questo gruppo rullo per porta a specchio si monta sul fondo delle ante scorrevoli a specchio, è regolabile una volta installato ed è utilizzato da molti produttori di porte per armadi. DAL PRODUTTORE Questo rullo per porta a specchio è realizzato in nylon e viene fissato a un alloggiamento in alluminio. È dotato di un design a montaggio inferiore regolabile con una borchia estrusa rotonda. Questo rullo di stile si adatta alle ante dell'armadio con telaio in alluminio della serie Monarch Door Co. 500.

Facile da installare in meno di 30 minuti con pochi semplici strumenti. Scorre nel canale estruso sulla porta. Costituito da una ruota in plastica con cuscinetti a sfera in acciaio, assemblata in un alloggiamento in alluminio estruso. Rullo con cuscinetto a sfera concavo da 1-1/2 pollici di diametro. Alloggiamento di montaggio 1-3/4 pollici x 1/2 pollici x 3 pollici. Utilizzato da Monarch Door Company su ante scorrevoli a specchio con telaio in alluminio serie 500.
Assembly Required Yes
Batteries Included? ‎No
Batteries Required? ‎No
Brand PRIME-LINE
Color Mill
Color ‎Mill
Country of Origin ‎USA
Customer Reviews 4.4 4.4 out of 5 stars 172 ratings 4.4 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Finish ‎Mill
Included Components ‎Hardware;Door, Gate & Window Hardware;bi-fold-door-hardware
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎N 6599
Item Package Quantity ‎1
Item Weight 0.11 Pounds
Item Weight ‎1.76 ounces
Manufacturer ‎Prime-Line Products
Material Plastic
Material ‎Plastic
Part Number ‎N 6599
Product Dimensions ‎1.75 x 3.81 x 0.5 inches
Size ‎1-1/2 in.
Warranty Description ‎Goods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

3.4

8 Review
5 Star
72
4 Star
11
3 Star
7
2 Star
2
1 Star
8

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Robert
ALMOST fit the door. With a little sanding the closet door with new wheels roll smooth as silk.
30 year old bracket on the door would not accept the new wheel. I suspect the milling is more accurate on the new wheel which is smooth vs the door bracket which has casting ridges. 300 grit silicon carbide sand paper onto the top of the slot of the door bracket solved the problem. Faster if a rasp file is used prior to the sandpaper. Took about 5 minutes of rasping/ sanding (after about 3 hours of experimentation). Closet door with new wheels smooth as silk.
Scritto da: Stephen tibbs
great replacement for old worn out sliders on closet doors
super well sliding door gliders replacements for closet doors. fit well but had to shave small amount off with file to fit.
Scritto da: G. Kan
Better than I thought it would be
Old closet doors were a pain to move. The wheels were damaged and were hard to move. They were simple to replace with a second person helping. Needed someone to help lift the door off the track. Wheels aren’t locked in so make sure to hold on to them to clear tracks. Once off of track the wheels can drop straight down. Slide new ones in and place back onto the tracks. Please NOTE that these are round fittings where it slides into the mount. There is a similar looking one that has a square fitting. Make sure you are getting the right ones. There is a screw on top of the mount attached to the door that will adjust the height of each wheel to ensure the doors can close flushed to the wall.
Scritto da: Rob B.
They Do Not Fit a Monarch Sliding Mirror Door WITHOUT MODIFICATIONS
These looked absolutely identical to the old/original ones I pulled out of my door. The problem is they do not slide onto the door. The casting is off just enough to cause interference between the two. I had to tap out the piece it slides into on the door, place it in a vise and grind down about 1/16" for it to now slide within the mounting piece. Having said all that, what should have been a 5 minute installation took about an hour between taking the doors completely out, laying them on their sides to get the frame track out to grind it down, had they fit correctly, the whole job would have taken 5 minutes... Now, considering they might be scarce elsewhere, once they were installed with the modifications, they work just like new. So, unless you have the tools and time, I would hire someone to install them for you.
Scritto da: P.H.Various
Really tight fit
The wheel spins beautifully. The assembly however is very difficult to install. The size is exactly the same as the receiver. So you have to tap this thing in with a hammer. I can’t speak for anyone but myself, but I really don’t like having to hammer my mirror doors. Just saying it’s a bit nerve-racking. Either way it’s in and they roll really nice.
Scritto da: Dee
Just what I needed....
I was so happy when I found these as my sliding closet doors are a discontinued model. This part fit perfectly. Sliding the doors runs smoothly on the track. This saved me replacement costs of over 700 USD.
Scritto da: edward Biedrzycki
It works
That it worked
Scritto da: GCC
Just What I Needed
My mirrored sliding doors were installed in 1985. I'm so thankful that I checked Amazon and found the exact part needed to replace the original door roller assembly. These worked great and were easy to change out and properly adjust. Now my sliding doors work like a charm!

Prodotti correlati

hot
Nemco 48279 Reostato, 500 Ohm 25W
2/5

€ 118.33

Nemco 48279 Reostato, 500 Ohm 25W
2/5

€ 118.33

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart