Prime-Line, D 1607 Gruppo Rullo Ruota, Unità Singola, Acciaio - Ruote Tandem, Cuscinetti a Sfera in Acciaio, Completamente Regolabile, Zinco Giallo

Brand:PRIME-LINE

3.7/5

37.59

Per ulteriori informazioni dimensionali, vedere il disegno al tratto. Può essere utilizzato su portefinestre in legno, alluminio estruso e vinile. Per tutte le informazioni dimensionali, fare riferimento alla grafica al tratto e confrontarla con le proprie esigenze prima dell'acquisto. UN PRINCIPALE PRODUTTORE E FORNITORE DI HARDWARE – La missione di Prime-Line è quella di fornire soluzioni di riparazione e sicurezza di alta qualità. COSTRUITO PER DURARE - Questo gruppo di rulli presenta una struttura dell'alloggiamento in acciaio con cuscinetti a sfera in acciaio e una durata insuperabile. ALTEZZA REGOLABILE - Il gruppo viene fornito con un'altezza minima da chiuso di 1-1/2 pollici. DIMENSIONI SPECIFICATE - Il gruppo rullo contiene uno spessore della ruota di 5/16 di pollice (larghezza) x un diametro di 1-1/4 di pollice, centri dei fori di 5-3/4 di pollice. Le sue dimensioni includono un alloggiamento largo 11/16 pollici, un'altezza dell'alloggiamento 1-3/16 pollici e una lunghezza dell'alloggiamento 4-5/8 pollici. COSTRUZIONE SOLIDA - Questo gruppo di rulli con cuscinetti a sfera in acciaio viene utilizzato per sostituire i gruppi di rulli tandem danneggiati o mancanti nelle porte scorrevoli in vetro del patio.

Per ulteriori informazioni dimensionali, vedere il disegno al tratto. Può essere utilizzato su portefinestre in legno, alluminio estruso e vinile. Per tutte le informazioni dimensionali, fare riferimento alla grafica al tratto e confrontarla con le proprie esigenze prima dell'acquisto. UN PRINCIPALE PRODUTTORE E FORNITORE DI HARDWARE – La missione di Prime-Line è quella di fornire soluzioni di riparazione e sicurezza di alta qualità. COSTRUITO PER DURARE - Questo gruppo di rulli presenta una struttura dell'alloggiamento in acciaio con cuscinetti a sfera in acciaio e una durata insuperabile. ALTEZZA REGOLABILE - Il gruppo viene fornito con un'altezza minima da chiuso di 1-1/2 pollici. DIMENSIONI SPECIFICATE - Il gruppo rullo contiene uno spessore della ruota di 5/16 di pollice (larghezza) x un diametro di 1-1/4 di pollice, centri dei fori di 5-3/4 di pollice. Le sue dimensioni includono un alloggiamento largo 11/16 pollici, un'altezza dell'alloggiamento 1-3/16 pollici e una lunghezza dell'alloggiamento 4-5/8 pollici. COSTRUZIONE SOLIDA - Questo gruppo di rulli con cuscinetti a sfera in acciaio viene utilizzato per sostituire i gruppi di rulli tandem danneggiati o mancanti nelle porte scorrevoli in vetro del patio.
Batteries Included? ‎No
Batteries Required? ‎No
Color ‎Yellow zinc
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 577 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Included Components ‎Roller assembly
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎D 1607
Item Package Quantity ‎1
Item Weight ‎7.7 ounces
Manufacturer ‎Prime-Line Products
Material ‎Steel
Part Number ‎D1607
Product Dimensions ‎4.63 x 5.75 x 0.49 inches
Size ‎1 Pack
Warranty Description ‎Goods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

3.7

13 Review
5 Star
79
4 Star
12
3 Star
5
2 Star
2
1 Star
2

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: SCUBAsabre
PERFECT fit and super easy to install.
I strongly recommend these replacement PRIME-LINE D 1607 Wheel Roller Assembly, 1 Pack, Steel. Most doors use two. These were a less than 10 minute swap of hardware with two screws each. NOTE, if your screws were corroded or damaged, you will need to buy those separately as these do not come with replacement screws. That was not an issue for me but thought you might want to know that. Installation note, be sure to adjust the wheel height to match your prior tension wheels before installation. You do this with a medium screw driver (Flat Head or Philips) on the side of each unit. If you don't, you might find that they protrude too much and prevent you from reinstalling the door. I read some folks horror stories of grinding the track, etc. on some reviews. I am dumbfounded at that choice. Hope this helps some folks that don't notice the adjustment head on the side of the unit. One of two cautions, pay special attention to the measurement for the installation screws and measure from the center of the hole on the original unit. There are two options for these replacement tension rollers that I found on Amazon and I bought both just to be sure. The other ( Slide-Co 13808-S Sliding Patio Door Roller Assembly, 1-1/4 in. Wheel Diameter, Steel Ball Bearing Wheels ) is visually almost identical except the installation holes are slightly different. Fortunately, with free returns, I was able to return the others. Second of two cautions, short of being a very large person with a wide "wing span" and the strength to go with it, don't be a hero/heroine and remove/replace the door alone off/on the track. It is a much quicker and safer process that way. AND, much less expensive than replacing a broken slider door. I didn't have this issue but I am aware of coworker that wound up stumbling and breaking his slider trying to do it alone.
Scritto da: Cobra
Perfect replacement for Truth 30410
I usually don't write reviews but after replacing the old Truth 30410 rollers of my sliding patio door, 30 years old, I was so pleased with the result that I had to write one. It was very easy to replace the old rollers with these new ones. Now, you can slide the door with just one finger. I hope they last several years at least.
Scritto da: unevenstar
Fixed our stuck sliding door
This was just what the sliding door doctor ordered. Our slider door is 22 years old and was not sliding without a lot of muscle behind the effort. We had taken out the old and cleaned out the rust and applied WD40 and the door was sliding without an issue. However, when we took out the mechanism, I measured it and ordered this one just in case. Good thing! Our repair lasted about 2 weeks and the wheels locked up again. This time we popped out the old and installed the new. It went in easily and quickly. The only problem we had was that my family initially went flying whenever they opened the door because it was gliding so well. I will probably buy another to have on hand in case the other mechanism fails. I would recommend this product.
Scritto da: B. Jones
Good, but might require some modification of the mounting position
I bought two of these to replace very similar units made by Truth. I thought from the description that this item was exactly the same as the ones I was replacing, but when I installed them I found that the wheels would not retract far enough to allow me to reinstall the door. Careful examination revealed the critical difference: the mounting flanges on these units are flush with the body, whereas the flanges on the Truth units were about 3/16" lower. I did manage to make them work by mounting them inside the door framework, which was difficult since it required making a nut stick to the backside of the flange until I could put the unit in place and get a machine screw started in the nut. The quality of the D 1607 is okay. They roll as well as the Truth units and are reasonably quiet. One difference, however, makes them less nice than the Truth units. The vertical adjustment screw changes the height of the door in discrete steps rather than in a linear manner. It would be possible that no step would fall in the ideal place for a particular door. I would recommend this roller assembly, but I would warn buyers to check the dimension of the mounting flanges and be prepared to make some modifications if it's not the same as the one you are replacing.
Scritto da: Ludo Krenn
Perfect fit. Makes the sliding door like new.
I replaced an old worn one on the back porch. I had no idea how rotten the old one was and should have done it sooner. Instructions are spare but the device use is pretty clear if you are replacing an old one. My only regret/time loss was my continued attempts to see how the leveling screw worked before I put it in. The thing seems to be require the weight of the door to give adequate resistance to the screw's leveling function. If I had just put it in, then adjusted it, it would have gone fine without unnecessary guessing by me. One caveat about ANY glass door: they are HEAVIER than you think and you will find the removal portion of the job easier and safer with two people, certainly at least to turn the door on its side, if not to remove it from the frame per se.
Scritto da: AuntBoo2u2
Perfect fit for our 33 year old sliding glass door!
I didn't realize how worn out the rollers were on our wood framed sliding glass door until we installed these babies. WOW! It used to take 2 hands to open & close our sliding glass door. Then one day...it just wouldn't open at all. We discovered that 1 of the roller assemblies was worn out completely & no longer worked. With the door being so old, I was really concerned that we wouldn't be able to find replacement rollers. (Our sliding door was manufactured in the late 1980's by Peachtree Doors, who are no longer in business.) This door is heavy, but it can now be easily opened & closed with with 1 finger!
Scritto da: MarkO
These made my life so much easier!
Our patio doors were sticking so bad, we had to use both hands to pull it open or to close it. It was a bear to remove the door (no fault to this product), but the rollers went in like a dream and I can now close my door with 2 fingers, instead of two hands. Well worth the money!
Scritto da: 123456789
fits
fits perfect
Scritto da: Yeah Right
Perfect
Perfect. Mild tap with a rubber mallet to get it to seat.
Scritto da: Don Smith
seems to work well
easy replacement
Scritto da: ScottM
Quick and cheap fix
I thought I was going to have to spend a couple grand on a new sliding patio door but these fit perfectly and very easy to install and door slides like new now.
Scritto da: Smitty 88
Smooth operation
My wife stopped complaining about how rough our patio door seemed to open. 5 stars
Scritto da: Anne
Work great
Work perfect and very fast shipping.

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart