MotorGuide MGA015PB6 Kit isolatore di montaggio â€” Assorbe gli urti, protegge l'elettronica â€” Include bulloni resistenti alla corrosione â€” Set di 4

Name: MotorGuide MGA015PB6 Kit isolatore di montaggio â€” Assorbe gli urti, protegge l'elettronica â€” Include bulloni resistenti alla corrosione â€” Set di 4
Brand: MotorGuide
SKU: 089287000156
Price: 41.31 EUR
Availability: InStock

Brand:MotorGuide

3.6/5

€
41.31

DESCRIZIONE DEL PRODOTTO Questi isolatori di montaggio MotorGuide assorbono gli urti per aiutare a proteggere l'elettronica e garantire le prestazioni più affidabili. Questi isolatori di montaggio forniscono un efficace cuscinetto e assorbono le vibrazioni e gli urti in modo che l'elettronica non sia soggetta a quell'energia potenzialmente dannosa. Questi durevoli isolatori di montaggio includono bulloni lunghi resistenti alla corrosione. Questo è un set di quattro isolatori di montaggio. MotorGuide si dedica alla progettazione e alla produzione di motori e accessori per pesca alla traina innovativi da oltre 50 anni. Definendo con orgoglio lo standard per il sistema GPS PinPoint® più accurato e i motori più silenziosi, MotorGuide fornisce ai pescatori una propulsione precisa per un controllo superiore della barca. Gli isolatori di fabbrica AMAZON.COM MotorGuide offrono un modo rapido e semplice per montare un motore per pesca alla traina o altri dispositivi elettronici marini quando si dispone di un accesso limitato. Ogni isolatore in gomma ha un dado stampato all'interno dell'estremità piccola, che quando viene serrato contro la parte inferiore del piatto dal bullone in acciaio inossidabile forma una forma a fungo di gomma che tiene in posizione il supporto. La gomma assorbe gli urti e limita le vibrazioni, fornendo un'installazione solida, senza dover passare sotto il ponte o dietro la console. Ogni kit viene fornito con quattro bulloni in acciaio inossidabile e quattro isolatori in gomma, insieme alle istruzioni di montaggio per una facile installazione.

Quantity

Aggiungi al carrello Compra subito

EAN: 089287000156

Categories: Sport e tempo libero, Sport e forma fisica, Canottaggio e vela, Barche e attrezzature, Hardware, Hardware del ponte,

Set di quattro. Include bulloni lunghi resistenti alla corrosione. Costruzione durevole. Assicurarsi che l'elettronica non sia soggetta a energia potenzialmente dannosa. Assorbe gli urti per aiutare a proteggere l'elettronica.

Brand	MotorGuide
Brand	‎MotorGuide
Brand Name	‎MotorGuide
Color	Black
Color	‎Black
Customer Reviews	4.5 4.5 out of 5 stars 816 ratings 4.5 out of 5 stars
Included Components	‎End Product and Infromation
Item Dimensions LxWxH	‎7 x 7 x 2 inches
Item Package Dimensions L x W x H	‎8.23 x 2.8 x 1.73 inches
Item Weight	0.3 Pounds
Item Weight	‎0.3 Pounds
Manufacturer	‎MotorGuide
Material	Other
Material	‎Other
Model Name	‎Motorguide Boat Motors
Mounting Type	‎Bow
Number of Items	‎1
Package Weight	‎0.14 Kilograms
Part Number	‎MGA015PB6
Recommended Uses For Product	For Salt Water
Recommended Uses For Product	‎For Salt Water
Size	‎One Size
Suggested Users	‎Unisex-adult

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Bee Xiong

Buy the real stuff

Buy the real stuff not the cheap stuff

Scritto da: J. Buckman

So far so good. Was a little skeptical at first after reading ...

So far so good. Was a little skeptical at first after reading a review of them ripping out due to not having enough fiberglass to grip. Once i drilled into my hull, i only had a depth of maybe a 1/4 to 1/2 an inch of fiberglass for these to grip on to, so without any other options, I proceeded with insallation. Insallation was super easy, and just so you know, you have to screw down on these a lot..... a lot. I seriously thought the screw was stripped, so backed it out and the screwed it in while holding it. Nope, just takes a lot of turns of the Ole screw driver if there isn't much to grip. It will tighten to where you cant turn anymore, just keep going till you get there. The motor held fine during trasport. I then moved boat to 5mph with gas motor and my wireless bow mount as a rudder just to see the torque. It worked great. I ordered another set to keep on boat just in case one does pop out. Been out so far 6 times and still holding strong. In the instructions it informs you to tighten after your first trip. I just tighten after or before every trip just incase. And if I have room, I just transport bow mount motor in truck or boat just to keep pressure off of mounts. defiantly worth the money and a great option if you have no water to get under bow.

Scritto da: Jordan Greenlee

Wouldn’t recommend

Tried to install these on my 175 bass boat, but the bolts weren’t long enough to reach through my Minn Kota trolling motor. I ended up having to trash them after one of the heads broke off. Wouldn’t buy again. I would recommend getting some long bolts, rubber washers to go between the trolling motor and boat, then going up underneath if at all possible and installing with nylon lock nuts. That’s what I did and it’s WAY more sturdy that way. I can have the 70lb trolling motor on the highest setting and it won’t even wiggle or vibrate the boat.

Scritto da: Chuck Loeffler

Very good fast mounts, just be aware of limited life...order a second set for spare.

These are actually very nice mounts and easy to use. I highly recommend, however anyone ordering should order a second set as a spare. The very design of these will not last forever. In fact, my first set of these just failed on the water. Glad I had a second set onhand on the boat and a phillips screwdriver in the boat toolbox. Took 15 minutes to replace with a new set on the water. Now for the problem...the design of the mounts are to isolate shock and torque from the mount holes through the fiberglass boat deck. They truly do the job for this....no deck cracking what so ever after three full years of fairly hard use. However, this advantage comes at a price. The mounts are rubber and will eventually tear through/separate from the brass threaded tightening sleeve. When this happens, the mounts will have no grip and pull straight out. Fortunately, my MG gator mount has four of these, and motor torque only tore thru the 2 isolators on one side of the mount. When I replaced, I did all four of the isolators....glad I did, as the other two were about to fail as well. When the two did let loose, the mount looked as if it was going to fly off the boat, but the other two held. Lesson learned....although you're not supposed to have to get access below the deck to use these mounts, I WILL be adding a washer and nylon lock nuts to make sure the next time they fail, the mount doesn't try to jump off the deck:) My heart can't take that anymore! Excellent mounts though, I'm back here to order two more sets for spares!

Scritto da: David L.

Motorguide Trolling Motor Mounts

I had never mounted a trolling motor myself on my boat, it came with one, and I was about to replace the whole thing (mount included) so I removed the old one...long story short, I ended up putting it back on and needed new mounts. I would have needed them either way... Removing the old mounts actually proved to be harder than putting in the new ones! I followed the simple directions (paraphrased here): Put the rubber mounts in pre-drilled holes of (X size). Set your motor mount on the rubber isolator tops, align holes. Firmly press down on the motor mounting system to be flush with the rubber mounts, and make sure the rubber mount is flush with the fiberglass on your boat. Drive the screws in to pull the rubber up and hold your motor mount in place. (pro tip - USE AN ELECTRIC DRILL / SCREW DRIVER for this) The steps are really that easy. And it works great. Not that there was any surprise, it's a simple concept, and a simple implementation. One thing you SHOULD be aware of though-- if you set your front holes (or if they were previously set) too far forward, you need to be careful the front bolts are NOT TOO LONG. If so, you will punch right through the bottom fiberglass...mine was that way and instead of remounting slightly further back, I just used the shorter bolts in front. No biggie. All in all, a great product that works fantastically. Easy to install and will last for years. 5 of 5 for me!

Scritto da: QRH

Only way to mount a trolling motor!

I don't know why Motorguide doesn't include these with the new trolling motor. If you don't have access, or can't reach inside the mounting location, these are for you! Simply drill the four holes, insert these, and screw in the bolts. The package that comes with the motor has nuts, bolts, washers, etc that require reaching inside the hull to attach, service, and tighten. These mounts eliminate that burden.

Scritto da: George Mack

Perfect replacement for the motoguide mount

It fit properly

Scritto da: kerry

Five Stars

Serves their purpose

Scritto da: Sergio Cattoni

Five Stars

exactly what i was looking for, and less expensive!

Scritto da: Dave Rice

One Star

don't work very well and up loosening off to easily so there is a danger of loosing the motor.

Scritto da: ROBERTO G.

MUY PRACTICO

BUENA SUJECCION PARA MI MOTOR TROLLER. SOLO QUE POR MI MODELO DE TROLLER TUVE QUE COMPRAR POR APARTE TORNILLOS DE 4" MAS LARGOS PARA LOGRAR LLEGAR A LA ROSCA