Morsa combinata Yost Vises 455

Name: Morsa combinata Yost Vises 455
Brand: Yost Vises
SKU: 797734008333
Price: 239.83 EUR
Availability: InStock

Brand:Yost Vises

3.8/5

€
239.83

Questa combinazione di tubi e morse da banco ha una base girevole a 360 gradi e si monta anche su un banco da lavoro. La base girevole a 360 gradi presenta 2 blocchi. Stringendo a mano la manopola di blocco sulla base ne assicura la posizione. Yost Vises produce morse e accessori per morse di alta qualità dal 1908. Forniamo i nostri prodotti sia a grandi distributori che a singoli artigiani in tutto il mondo, spaziando da morse di livello industriale, morse di livello professionale, morse da officina, morse leggere e pesanti. morse di servizio, morse multifunzione, morse per saldatura, ecc. I nostri prodotti soddisfano o superano lo standard industriale della specifica federale GGG-V-410A, fornendo ai consumatori prodotti di qualità che durano per anni a un ottimo prezzo.

Quantity

Aggiungi al carrello Compra subito

EAN: 797734008333

Categories: Prodotti industriali e scientifici, Strumenti e miglioramento della casa, Utensili elettrici e manuali, Utensili manuali, Tenuta del lavoro, Morse, Morse da banco,

GARANZIA: viene fornito con una garanzia limitata di 1 anno e un reso di 90 giorni. INFORMAZIONI DI SICUREZZA: L'uso improprio delle morse può causare gravi lesioni agli occhi, alle mani e/o ad altre parti del corpo. Le morse devono essere installate e utilizzate correttamente. Prima della configurazione e dell'uso, leggere, comprendere e seguire tutte le istruzioni descritte nel manuale. QUALITÀ DEI MORSETTI YOST: Ogni strumento Yost Vises è progettato per avere elevati standard di qualità, resistenza e durata. Apprezziamo la qualità rispetto alla quantità e produciamo prodotti sicuri e facili da usare. Offriamo supporto tecnico a vita per sostenere la nostra garanzia di qualità. COME USARE: assicurarsi che la morsa sia montata saldamente sul banco da lavoro e che il blocco della base girevole sia sicuro. Aprire la morsa ruotando la maniglia della morsa in senso antiorario. Posiziona l'oggetto tra le ganasce seghettate. Chiudi la morsa ruotando la maniglia in senso orario fino a quando l'oggetto non è aderente alle ganasce seghettate e continua a stringere fino a quando non puoi più spostarlo. Non stringere eccessivamente in quanto ciò potrebbe danneggiare l'oggetto e/o la morsa. Al termine del lavoro sull'oggetto, ruotare la maniglia della vite in senso antiorario per rilasciare l'oggetto. BASE GIREVOLE: base girevole girevole a 360 gradi con 2 blocchi. SPECIFICHE TECNICHE: Larghezza della mascella 5,5 (12,7 cm), Apertura della mascella 5 (12,7 cm), Profondità della gola 3,25 (9,525 cm), Capacità minima del tubo 0,125 (0,3175 cm), Capacità massima del tubo 2,5 (6,35 cm). MORSA COMBINATA: La morsa combinata per tubo e banco da 5,5 pollici Yost Vises 455 è realizzata in ghisa grigia da 30.000 PSI con una barra a U in acciaio. Dotato di un'ampia superficie di lavoro dell'incudine, ha anche ganasce superiori dentellate in acciaio temprato sostituibili e una ganascia per tubi dentellata permanente di grande capacità.

Brand	Yost Vises
Color	Blue
Country of Origin	China
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	14 x 7 x 9 inches
Item model number	455
Item Weight	11.36 Kilograms
Manufacturer	Yost Tools
Material	Cast Iron with Steel U Channel Bar
Product Dimensions	14 x 7 x 9 inches; 25.05 Pounds
Style	Modern

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Doug Wade

Very nice vise. A lot more sturdy than I thought it would be

Shipped as advertised. Will last for years. The plastic pieces to fit on the jaws was not in my box.

Scritto da: Mike

Solid, sturdy, and smooth operation. Great vise.

I love this vise. I got the 5.5" one as an upgrade from my previous one which was often too small, or would slip on my workbench. My previous one was the kind that tightens itself on the the workbench but doesn't bolt in. The Yost 455 is the perfect size for my projects and allows me to bolt it down so it's easy to use. Let me share the bolts, washers, and locking nuts you will want to use for mounting this. There is some conflicting information in the Q&A and reviews. If you have a workbench where you can drill through the top, I can say definitively that the best way to mount it is use the base as a template and mark where the holes are in the base. Then use a 1/2" drill bit to drill holes through the tabletop. I used the following hardware which should work for anyone. You'll just need to adjust the bolt length for the width of your tabletop. Bolts: 1/2 in.-13 x 2-1/2 in. Hex Bolt (2.5" was the right length for my tabletop, you made need shorter or longer) Washers: 1/2 in flat washers with a 1 in outer diameter (OD) (1/2" inner diameter) Locking nuts: 1/2 in.-13 Nylon Lock Nut All the mounting hardware set me back about $11 at the local orange colored hardware store. It would have been nice if the hardware was included, but the vise itself is a great value regardless.

Scritto da: John Farrington

Solid and well made.

This is a solid and well made vise. Smooth, easy operation. This should last for years.

Scritto da: Tony

Good Value

I bought this blue Yost 455 Vise about 1 year ago and I am very happy with it. Most of my work is light duty, so I mounted it on a wooden work bench with a 2 x4 frame. For my light duty needs, I used 1/2" hex bolts to minimize 2 x 4 wall thickness loss. I then bought the RUITOOL brand blue colored 5.5" Vise Jaws Nylon Vise Block with Magnetic Soft Jaws, and I'm very happy with these soft jaws too. The Yost 455 and these soft jaws are an excellent match for my bench needs. If using a 2 x 4 frame for vise fastening, think about using a drill press or portable drill guide so that the drilled holes are straight. .

Scritto da: BaronR

No need to spend more

Very sturdy and good features.

Scritto da: Jeff

Vise has all the features of a bench vise.

Fit and function are good, it only weighs about 35 lbs, which means for a 5.5” vise its a bit light. Weight equates to sturdyness when looking at vises. It will work well for my needs.

Scritto da: Mattamuskeet

Poor QC

I tried buying a vise local first at Harbor Freight (HF), but returned due to poor casting and I wasn’t impressed by Home Depot’s offerings. I ordered the Yost 455 after a lot of research. Out of the box, this thing is not the best quality. The jaws do not line up and there is a lot of slop when the jaw is open. It also came with a nick in the metal from the manufacturer. Like the 5” “Central Forge” HF vise, this one is made in China, but at least the jaws lined up with no slop on the HF and it was only $60 compared to $85. Still this one is better in comparison and a decent value. I just wish they still made quality items in the US at a reasonable price because nothing I have bought from China has been what I would describe as 5 star quality.

Scritto da: William A McHale Jr

Great value!

I swore off buying any more garbage from harbor freight and figured that meant paying a lot of money for items like this. Yost company is from MI, USA. I couldn't figure out for sure where this is made but I don't care because I installed and used it today and am extremely happy with it. Build quality, fit and finish look great. Super value.

Scritto da: BL

Awesome tool

This seems to be of great quality for the price. Others I searched for were either too expensive or looked to be of cheap quality. Shown is a picture of it bolted to my workbench. For it's size it can open fairly large and the pipe jaw area is very handy to have as well. Also love the rubber gromets permanently attached to the handle. Rotating function is very useful and locks securely into position.

Scritto da: Aaron D

Great For Light Duty Home Use

Great for light to medium duty. Have this in my garage on a makeshift work bench I made out of an old table that was going to be thrown out. Bolted to table fairly easy with 4 carriage bolts, nuts and washers. Jaws open and close smoothly and hold whatever I am working on very well.

Scritto da: Simon

Good bang for the$

Good quality for the price and company as been around for a while. No it’s not a top brand but it’s a really good starting point that will last you years.

Scritto da: Harywood

A Nice Vice for a Good Price

My son wanted a vice for Christmas. I did some research and aside from the expensive Record vises, the Yost provides good features and performance at an affordable price. He's really happy with it.

Scritto da: Paul

Hapy with my Yost vise

I am very pleased with my Yost vise. Build-quality and precision seem to be very good, and the price was very competitive.