Mophorn Triple Bag Air Jack, capacitÃ 3 tonnellate (6600 libbre), cric pneumatico portatile per auto, sollevamento rapido fino a 16 pollici di altezza, sollevamento rapido e resistente per riparazione auto in garage, manico corto rosso

Name: Mophorn Triple Bag Air Jack, capacitÃ 3 tonnellate (6600 libbre), cric pneumatico portatile per auto, sollevamento rapido fino a 16 pollici di altezza, sollevamento rapido e resistente per riparazione auto in garage, manico corto rosso
Brand: Mophorn
SKU: 0631384407705
Price: 293.98 EUR
Availability: InStock

Brand:Mophorn

3.6/5

€
293.98

Ampia applicazione: il sollevatore rapido per auto è perfetto per la situazione in cui è necessario sollevare una singola ruota su terreni morbidi, acqua su sabbia o strade fangose per auto, minivan, SUV e fuoristrada di uso familiare. Design salvaspazio: il design della maniglia per il trasporto si adatta alla forma della mano, in modo da poter controllare completamente il jack quando lo si utilizza. E l'intera struttura è compatta e facile da riporre. Quindi puoi portarlo comodamente all'aperto. Utilizzo sicuro: in primo luogo, tieni chiusa la valvola rossa, apri la valvola verde e immetti l'aria compressa; quando si gonfia all'altezza, spegnere la valvola verde. Dopo l'uso, aprire la valvola rossa per far fuoriuscire l'aria. La valvola di sicurezza al centro assicura che il gas iniettato non sia eccessivo per garantire la sicurezza del processo di utilizzo. Costruzione resistente: il nostro martinetto pneumatico è costruito con acciaio ad alta resistenza che rende l'intero corpo robusto e durevole. Il telaio in acciaio verniciato a polvere e la gomma si abbinano per ridurre l'impatto. Gli airbag altamente sigillati non perdono né si graffiano. Un'area sollecitata più ampia si adatta a un luogo morbido e facile da piegare. Jack salva-lavoro: capacità del martinetto pneumatico: 6600 lbs/3T. Altezza minima: 5,3/135 mm. Altezza massima: 15,75/400 mm. Ci vogliono solo 5 secondi per sollevarsi. Temperatura di lavoro: -60 ℃ ~ 50 ℃. Ingresso aria: G1/4. Il nostro triplo martinetto è il modo più semplice e veloce per sollevare l'auto.

Prodotto non disponibile

EAN: 0631384407705

Categories: Settore automobilistico, Strumenti e attrezzature, Garage e negozio, Sollevatori, montacarichi e martinetti per veicoli, Jack, Martinetti da pavimento,

Brand	Mophorn
Brand	‎Mophorn
Color	‎Red
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 337 ratings 4.5 out of 5 stars
Item Dimensions LxWxH	‎20.5 x 19.7 x 7.5 inches
Item model number	‎3T16INR
Item Weight	‎36 Pounds
Load Capacity	3 ton
Load Capacity	‎3 ton
Manufacturer	‎Mophorn
Manufacturer Part Number	‎3T16INR
Material	Alloy Steel
Material	‎Alloy Steel
Maximum Lifting Height	400 Millimeters
Maximum Lifting Height	‎400 Millimeters
Minimum Height	‎5.3 Inches
Model	‎3T16INR
Product Dimensions	‎20.5 x 19.7 x 7.5 inches
Style	‎Short Handle
Vehicle Service Type	Car
Vehicle Service Type	‎Car

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Fritz

Works great

Overall height is 6” when down. Before you hook up air hose. With both valves open push airbag down and while still holding down close both valves. That will make the overall height 5 1/2”. If you install the handles it will then be 6 1/2” overall height. I left the handles off so I get more clearance when putting under lower cars. It is heavy but easy enough to slide under car into position without the handles. Lifts car without any hesitation. You can regulate how fast it goes up and how far by slowly opening air valve and then shutting off. When lowering it has an exhaust restriction so it goes down slow. Plus you can just partly open exhaust if you want to go down slower and close it again if only wanting to lower part of the way. It also has a over pressure safety valve. You will probably need to trim 1/4-3/8” off the plastic hose when putting it together. That way it isn’t kinked and restricting airflow. Airbag feels heavy duty and should last a long time. But always use jack stands incase the bag did pop. Much nicer to use in tight garage then floor jack with long handle sticking out in the way.

Scritto da: Stickman

Almost, but not quite. Has some serious flaws. Read before you buy.

There are a ton of these types of jacks on Amazon, not sure if they are all made by the same but this one has 2 serious issues. #1 When you go to store it in the upright position, it almost tips over. Just a slight bump and it will tip over. If you are like me, your garage is full of cars and you put stuff like this along the side walls, near the car when it's parked. If you do that and if you or anyone just bumps it, it can tip over and fall into your car. The flaw is the little legs are welded in the wrong position. (and see #2 below). There is no way to bend them so I tried fixing #2 below to see if that would help but it did not. #2. The handle bends way too much (up, or away from center.) This actually can put the controls in contact with the bottom of the car if your car is low and/or you are positioning the jack from one side to the far other side or even the middle depending on the car. This bend also compounds the problem of it tipping over because the valve assembly is heavy and way past center of the whole unit. To fix these issues I tried: Bending the handle to take some of the bend out. This helped a little but not much. The next thing I'm going to do is wele a small 1/2" metal tube across the "legs" at the bottom to elevate that end of the jack so the unit is more centered in it's balance when positioned vertically. I'm pretty sure this will solve the problem. I'm not sure if I just got a bum one or if they are all like this. Otherwise it's a good jack. If you store it on the floor in a horizontal position you'll never notice these flaws. But if you try to store it vertically (like it's designed to do) you will find the problems. Good luck.

Scritto da: travel tools

Decent jack

The media could not be loaded. The screw holding the top pad is stripped out of the box! Will have to fix but seems otherwise a good jack and can lift my >8500# motorhome with a big enough compressor. A small off-road compressor won't do the trick. Possibly a pancake compressor would?

Scritto da: Mike64

Awesome jack! Power lifts if not watching it.

I used this to do tire work on a trailer. It blasts it up in the air if you’re not careful. Just a perfect jack for height adjustment, either too high or low. It has a great range of heights too.

Scritto da: Amazon Customer

Nice product

Nice jack and pretty stable. I have used it a few times now and I am happy with it. it does seem to lean towards one side when I lift. However the more I use it and position it I find it working better. As with all lifting equipment pay attention and be aware of what you are doing! When you give it air it can move VERY fast!

Scritto da: Dave B.

Performs well. Love it

It required some simple assembly. I checked other fasteners and hose as some others had complained about these. Mine was perfect. My portable DeWalt air compressor supplied enough pressure to easily lift the back end of my Mustang. You can control the rate of lift by opening the green valve slowly and partially. You can also stop it part of the way up. Definitely use jack stands. It settled on my lift with it partially elevated. I did not hear any air leaks, so I assume it came from the jack. I expect to get a lot of use with this.

Scritto da: Jason Musgrave

Awesome device!

Product is solid and works well. I actually used it to level out some deck joists so I could establish new footers. Will come in handy with many applications !!

Scritto da: Anthony Porter

Does the job

I am pleased with this product

Scritto da: steve gagnon

un bon produit sauf tuyau serrage

embout ou connecte le tuyau de plastique trop fragile a casser au premier serrage

Scritto da: mado

robuste

parfait mon chum l adore

Scritto da: wendell

works good

lot better than the old floor jacks. just dont get under without a block or jackstand, same for the old jacks

Scritto da: Amazon Customer

Caused major damage

The bolt that holds the rubber pad on top sheared off during lift, vehicle slip back off the frame and the neck went through the lower rad support destroying the rad and AC condenser.

Scritto da: glen Schofield

Not very good

Lifts good but handle in wrong place the handle broke off it was welded lower than the base hade to patch it up to finish using it