0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

Moen CL707 Deviatore per braccio doccia girevole con supporto per doccetta, cromato 0,5 cromato

Brand:Moen

3.7/5

€
144.17

DESCRIZIONE DEL PRODOTTO Il sistema di installazione Pro-Fit elimina le viti di fermo per un montaggio più rapido e sicuro. Include modello e hardware di montaggio per eliminare il problema dall'installazione. Resistente alla corrosione. DAL PRODUTTORE Dalle finiture garantite per durare una vita, ai rubinetti che bilanciano perfettamente la pressione dell'acqua, Moen stabilisce lo standard per una bellezza eccezionale e un design affidabile e innovativo.

Quantity
Aggiungi al carrelloCompra subito

EAN: 0026508250570

Categories: Strumenti e miglioramento della casa, Impianto idraulico grezzo, Valvole, Valvole deviatrici,

Supportato dalla garanzia a vita limitata di Moen. La finitura cromata è altamente riflettente per un aspetto a specchio che funziona con qualsiasi stile di decorazione. Culla per doccetta integrata. Devia facilmente il flusso d'acqua verso il soffione, la doccetta o entrambi contemporaneamente. Il deviatore aggiunge la funzionalità della doccetta ai soffioni a montaggio fisso.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Moen
Color ‎Chrome
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 275 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Exterior Finish Chrome
Finish ‎Chrome
Flow Rate ‎1.75 Gallons Per Minute
Included Components ‎Shower Arm Diverter
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 4.13 x 3.06 x 1.97 inches
Item model number ‎CL707
Item Package Quantity ‎1
Item Weight ‎12 ounces
Manufacturer ‎Moen Incorporated
Number of Ports 2
Part Number ‎CL707
Product Dimensions ‎4.13 x 3.06 x 1.97 inches
Size ‎0.5
Style ‎Transitional
Warranty Description ‎Limited Lifetime Warranty

3.7

12 Review
5 Star
81
4 Star
9
3 Star
4
2 Star
2
1 Star
4

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Lori M. George
Exactly what I needed!
This is the product I needed to take my average shower up a notch. This Moen water diverter is perfect, high quality, and I installed it myself. I wish the price point was better, but in this case you get what you pay for. I previously installed a head with plastic parts and within a few weeks the inside rubber washer was already out of place. This Moen is all metal and comes with rubber washers too. Product is heavy, but not too larger. Once I received it I felt good about it not being too heavy to install. In my opinion, worth it!
Scritto da: Steve C
nice but only installs one way
I bought this wanting to add a handheld shower to my rain shower. The rain shower uses a U shaped pipe. This diverter installed easily to the pipe coming out of the wall, with the rain shower pipe screwed in on the other side - but it didn't work right. The water needs to come in through the female side of the diverter and exit through the two male connections. In retrospect this is obvious, but it wasn't to me. I added a couple adapters and it works great.
Scritto da: S. Nelson
Good 1, 2, 1+2 diverter. No leaks.
I purchased this Moen CL707BN diverter in brushed nickel to augment my existing overhead rain-head shower. I added a Moen hand-held unit also. The hand-held unit that I added makes it easy to wash down the shower to clean it, and my wife likes to switch from the rain head shower to the hand-held when she doesn't want to get her hair wet. (my review of my Moen rain head shower is also here on Amazon). I have this Moen diverter connected to a curved pipe that feeds my Moen rain-head shower (overhead) and my Moen hand-held (which sits in the slotted bracket portion of this diverter). This CL707BN is metal, heavy, and has a nice finish. It installed easily in place of my existing diverter. This Moen diverter has 3 modes: output #1, output #2, or output #1+2. I especially like that it doesn't leak from the output port which is off (my previous cheap diverter did). So if I have the turn-knob on output #1, then no water comes out of output #2. Ditto the other way. When both output #1 and #2 are on, for me the flow is reduced to each (I have well water, so the head flow is fixed). The turn-knob has a substantial feel to it with detents at each position. Unlike other diverters that have a push button or a slider, this turn-knob is easy to turn, clicks into place at each detent, and is firm and easy to turn. The turn-knob is held in place by a screw (under the silver colored pop-off cover). The hand-held holder on the other side is also held on with a screw. The hand-held holder holds my Moen hand-held (which I bought separately); and it appears to be standard size for most brands but I didn't confirm this. My only complaint is the size of the hole that the water flows through. The image shown (which appears to be a computer generated solid model) shows a single hole. The unit that I received has 4 small holes instead of one large hole; this limits the flow further (see my uploaded photo). Since the sealing mechanism covering the holes is a black spring loaded piece that presses against the holes, I assume that Moen made a design change along the way so that the holes sealed better (or to limit flow?). However, since I have well water and pressure is very limited, I needed increased flow. So I removed both screws, removed both end pieces, disassembled the unit completely, and drilled out the four holes (in two places) to make one single hole. For the first couple of days, the spring loaded piece leaked a little water to the output port that was not being used; but that leaking stopped so I assume that it was caused by a metal shard that I had been unable to remove. I'm quite happy with the unit; especially compared to previous diverter units that I've had. The only surprise was the four little holes instead of the one large hole on the pipe, but I dealt with that. Scott
Scritto da: Brandi Easterling Collins
Great way to retrofit an existing shower
This is an excellent handheld sprayer adapter and holder. It looks great with other brushed nickel Moen fixtures and is easy to install. It's small enough that it's not intrusive in the shower. The quality is great and what I've come to expect from Moen products.
Scritto da: zkork
was hoping for true 3-way valve. not happy with head/arm mount nut design
was hoping for true 3-way valve. not happy with head/arm mount nut design
Scritto da: Coffeejunkie
Sturdy and decorative diverter but installation is not for the novice.
Since the feeder-pipe for my overhead shower head comes out of the wall level, then makes a 30 degree turn downwards, the only way I can use this diverter with my Rainfall Shower Head and Hand-held Shower Head is to have the diverter knob on the right side, the extension arm for the shower head connected to the upward-pointing port, and the hand-held shower head connected to the downward-pointing port. My existing Rainfall Shower Head with Adjustable Height/Angle Extension Arm has adjustable joints at both ends of the arm. These joints provides a slight adjustment in the height of Rainfall Shower Head and its extension from the wall. The Rainfall Shower Head hangs freely from a ball-joint so that its weight alone let the shower head hang level water comes straight down like rainfall on a clam day. The critical part of the installation is to have enough pressure applied to the washer at the diverter's connection to the feeder-pipe when the diverter is screwed tight enough to seal the joint, and the diverter switch's turn-knob and hand-held shower cradle are level and parallel to the wall where the feeder-pipe emerges. At this point, the feeder-pipe and the Extension Arm all lie in one plane vertical to the wall, and it looks nice. In my case, I added two additional washer to the joint between the feeder-pipe and the Moen Diverter and completed the installation with no leaks. I tried adding only one washer and that joint leaked. With two additional washers, I still had to tighten the connection so much that the lock nut ended up slightly misaligned with its pipe to the diverter. Hopefully, nothing is so out of alignment that the connection will fail and start leaking. Time will tell. If it is still working after a couple of years with no leaks, I may come back and upgrade this five-star.
Scritto da: Cheng
Solid brass, high quality two sprays at once!
This is high quality diverted made of solid brass. There is no flow restriction in this diverted and you can run water to either or both heads. If using moen heads pull the O-Rings out of the head inlet fitting to increase flow.
Scritto da: Garreth Scott
Hefty
All metal. Hefty, sturdy. The handheld shower holder rotates but does not do so on its own which works great for the hefty all metal handheld shower it has to hold. Wish this was cheaper, but it is worth the cost compared to others out there. -2022 update. Leaking now. The diverter no longer fully diverts and water drips out of the handheld that is not on. Too expensive for leaking.
Scritto da: Amazon Customer
Absolutely worth the price, dont buy the cheap plastic ones
I tried them both, I bought the inexpensive plastic made converters around 30 dollars from Amazon. Guess what? It didn't fit well, I spent about 40 minutes tried to make it work, adjusting the position, tension and reapply different thickness of plumbing tap. I thought it was my problem, i end up discovering that the screw pattern was a bit off and it was leaking from from all 3 connection points despite all my efforts. I was disappointed thinking maybe I really suck at DIY and returned the cheap product. Afterward, I saw this Moen convertor, initially I hesitated a bit due to the fact this is not a cheap converter, but this is a reputable brand. Guess what it turns out i made the right choice and I am not a bad DIYer after all, i was able to install this within 5 mins and no where was leaking a drop except my main shower head and my handheld shower held when switched on/off. the entire unit was made of metal and it was definitely very solid. Highly recommend, save your troubles and just get this one. Save the time to enjoy a good beer.
Scritto da: Layzah
High Quality Metal Piece Thats Worth It!
It is made in china (on package), but I am not quick to judge based on reviews. It is pricey, but you get what you pay for. It is real metal and feels high quality and is back by Moen brand. Very easy to install, took 5min. I have a filtered shower head from exultplanet, and the mount shape fits it perfectly (standard sizing fits this mount). I am waiting for a nicer shower head to add on the front. Love that you can adjust the shower head angles (twist up down on mount). Pressure of water is very good and unrestricted using this peice even though it has 4 hole cutthrough visible inside the pipe. No complaints whatsoever, and well worth the price for the hassle it saved me if I didnt buy quality. Thanks for a great product!
Scritto da: Alan
It's all metal construction.
After reading all of the reviews, I made the plunge to getting this diverter that is 4x the price of a regular diverter. Securing it requires a cloth (to wrap the nut) and a vice grips, but it does stay on if you follow the instructions. The mechanism is smooth and sturdy, and feels like a $100 diverter should, even after owning it for 2 months.
Scritto da: Frank
Plastic is horrible
All steel design is fantastic

Prodotti correlati

hot
Grohe 47655000 Accessori per il bagno Parti di ricambio per lavabo da bagno, Starlight Chrome
1/5

€ 86.01

Grohe 47655000 Accessori per il bagno Parti di ricambio per lavabo da bagno, Starlight Chrome
1/5

€ 86.01

hot
Symmons 3500-CYL-B-MB-TRM Dia valvola trim in nero opaco (valvola non inclusa)
3.5/5

€ 229.15

Symmons 3500-CYL-B-MB-TRM Dia valvola trim in nero opaco (valvola non inclusa)
3.5/5

€ 229.15

hot
Delta Faucet Saylor Black 6-Setting Maniglia per doccia Deviatore Trim Kit, deviatore valvola Trim Kit, deviatore doccia Kit, nero opaco T11935-BL (valvola non inclusa)
4.1/5

€ 369.10

Delta Faucet Saylor Black 6-Setting Maniglia per doccia Deviatore Trim Kit, deviatore valvola Trim Kit, deviatore doccia Kit, nero opaco T11935-BL (valvola non inclusa)
4.1/5

€ 369.10

hot
Delta T11855 Vittoriano 3 Impostazione Deviatore Trim, Cromo 5,00 x 5,00 x 5,00 pollici
3.6/5

€ 229.95

Delta T11855 Vittoriano 3 Impostazione Deviatore Trim, Cromo 5,00 x 5,00 x 5,00 pollici
3.6/5

€ 229.95

hot
Standard americano T186430.002 Trim valvola deviatrice fluente, cromo lucido
3.8/5

€ 40.32

Standard americano T186430.002 Trim valvola deviatrice fluente, cromo lucido
3.8/5

€ 40.32

hot
Delta Faucet R22000 MultiChoice Valvola universale 3 impostazioni 6 impostazioni Deviatore integrato per doccia personalizzato Ruvido, Kit valvola doccia personalizzato, Costruzione in ottone, R22000-WS (fermi per cacciavite inclusi)
3.8/5

€ 234.79

Delta Faucet R22000 MultiChoice Valvola universale 3 impostazioni 6 impostazioni Deviatore integrato per doccia personalizzato Ruvido, Kit valvola doccia personalizzato, Costruzione in ottone, R22000-WS (fermi per cacciavite inclusi)
3.8/5

€ 234.79

hot
Valvola deviatrice a tre vie Kingston Brass KS3030PX con kit trim, nero opaco
0.1/5

€ 468.54

Valvola deviatrice a tre vie Kingston Brass KS3030PX con kit trim, nero opaco
0.1/5

€ 468.54

hot
Kit di ricostruzione valvole Eljer 2
3.3/5

€ 130.64

Kit di ricostruzione valvole Eljer 2
3.3/5

€ 130.64

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu