Milescraft 4021 Morsetti per cingoli â€“ Sega per cingoli e Morsetti per cingoli a T (confezione da 2)

Name: Milescraft 4021 Morsetti per cingoli â€“ Sega per cingoli e Morsetti per cingoli a T (confezione da 2)
Brand: Milescraft
SKU: 0737888402106
Price: 47.75 EUR
Availability: InStock

Brand:Milescraft

3.1/5

€
47.75

Questi TrackClamp compatti e leggeri consentono di utilizzare binari e guide senza che il morsetto si intrometta. I TrackClamp sono versatili e possono essere utilizzati in un'ampia varietà di configurazioni di binari a T e guida per sega. Può essere utilizzato anche in molte altre applicazioni.

Quantity

Aggiungi al carrello Compra subito

EAN: 0737888402106

Categories: Strumenti e miglioramento della casa, Utensili elettrici e manuali, Utensili manuali, Tenuta del lavoro, Morsetti, Tenere premuti i morsetti,

Da utilizzare con: binari a T, guide per binari, guide per sega. Leggero e facile da usare. 4 spessore massimo del pannello per il bloccaggio. Manopola ergonomica per una facile regolazione. Il cuscinetto girevole antiusura previene danni ai pezzi finiti. Il morsetto sottile, a basso profilo e per impieghi leggeri si adatta alla maggior parte delle guide per seghe a binario.

Batteries Required?	‎No
Brand	Milescraft
Color	Grey
Color	‎Grey
Country of Origin	‎China
Customer Reviews	4.0 4.0 out of 5 stars 141 ratings 4.0 out of 5 stars
Included Components	‎TrackClamps
Item model number	‎4021
Item Package Quantity	‎1
Item Weight	0.7 Kilograms
Item Weight	‎1.54 pounds
Manufacturer	‎Milescraft
Package Dimensions	‎7.76 x 4.33 x 1.85 inches
Part Number	‎4021
Power Source	‎Hand Powered

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Dana Gleason

Wood shop.

Many uses in wood shop.

Scritto da: MamaR

Heed the warning about tightening

The clamps are too deep for the hardness of the metal. It is VERY easy to bend them. I suspect bending them back will significantly shorten the life of the clamp. These are useful if you NEED the depth, and DON'T NEED to clamp firmly.

Scritto da: Terry Gowing

Fine if you need something...

to fit into t track. I ordered these for my Kreg track saw and was surprised to see a sticker that warned not to tighten them too tight. It makes sense, they have plastic pads and knobs. It wasnt until I received them that I realized my Micro Jig clamps would do they same thing, and still be clamps. These would would fine for the track, but I prefer my clamps to... clamp. The Microjig version is better in every way except cost.

Scritto da: Tim Epperson

Pretty tall but needs some filing to make it slide well.

I bought these clamps because they are taller than others I found on Amazon. They are cast aluminum and the bottom of the clamp that goes into the track is not flat. There is aluminum left over from the casting process and they are rounded on the bottom. Therefore, the didn't slide in my track easily. I filed the bottoms flat and they work much better.

Scritto da: edward hofbauer

Claps works great for me

Like them

Scritto da: Kyle Olson

Hard to use. If you think it's OK you probably don't have experience in track/table clamps.

I got these thinking the size and design might allow for different use in jigs with T-Track. If I had looked more closely I wouldn't have bought them. It turns out there's nothing in these that a normal track clamp can't do. There may be some track they can fit in because of the thin track bar, but mostly this causes the clamp to not clamp as neatly. They take forever to adjust because there's no form of quick adjustment; they're longer than anything I ever want to adjust using only a screw. You might want them if you needed clamps that rarely ever move. Maybe if you had a guide rail on a table that didn't change, but that seems fringe. Maybe some very specific jig where you need the size to change slowly (but not micro adjust), but even then you should probably get a different clamp. I can't imagine trying to use one in a dog hole or with guide rail when the clamping size changes. It's pretty easy to find a similarly priced pair of clutchless or trigger track clamps that will be better in every way.

Scritto da: Cecil

OK clamp

Lighter duty than I hoped. The do fit a lower profile T-track quite nicely. They will work for some jigs. Generally I use a deeper t-track and a heavier duty t-track clamp. I do like them. If you consider purchasing them, just remember these are a light duty clamp which works fine to hold work in table saw and router jigs, but are not good where clamping pressure is needed.

Scritto da: Happy Flight Enthusiast

Works great

Works better than plastic Kreg track saw clamps and on thicker material

Scritto da: Amazon Customer

Good addition/complement to T-track hold-down clamps supplied with my Evolution track

DIY

Scritto da: Steve

Milescraft 4021 TrackClamps - Universal T-Track Hold Down Clamps (2 Pack)

I did receive these today but unfortunately they do not fit the 2 sizes of T track on my Bosch router table fence. I have a Milescraft Signcrafter and it will work for the jig for clamp down as they are low profile. Was hoping they would work for the router table fence but I guess I must have missed something in the description

Scritto da: JORGE CUELLAR

Exelente calidad

Por la calidad y el precio

Scritto da: Phillip Riley

Just remember, do not overtighten.

These claps assist in keeping my kreg straight cut track in place.

Scritto da: Amazon Customer

Good quality

Great quality and good for purpose