Mayhew Pro 25017 Punzone pilota da 3 mm 3 mm x 4

Brand:Mayhew Tools

3.6/5

29.38

Il Mayhew 25017 Pilot Punch, 3mm ha un design brevettato Mayhew originale con un'estremità arrotondata che si adatta perfettamente a un perno. Conosciuto anche come punzone per spilli. Utilizzato per inserire e rimuovere i perni di rotolamento o altri perni di tensione cavi. Prodotto negli Stati Uniti. OAL: 4 pollici, dimensioni del corpo: 1/4 di pollice, tipo di corpo: rotondo, larghezza lama: 3 mm e peso: 0,04 libbre. Mayhew è sinonimo di qualità, affidabilità e fiducia. Quando il calibro degli strumenti è importante tanto quanto le competenze dei professionisti impiegati, le aziende si affidano a Mayhew per portare a termine il lavoro. Dal 1856, i nostri punzoni, scalpelli e leve sono gli strumenti di riferimento per OEM e meccanici professionisti in tutto il paese. E mentre la nostra azienda è cresciuta per soddisfare le esigenze del mercato professionale, così come quelle degli appassionati di auto fai-da-te,

Prodotto negli Stati Uniti. Utilizzato per inserire e rimuovere i perni di rotolamento o altri perni di tensione cavi. Conosciuto anche come punzone per spilli. Design brevettato originale Mayhew con un'estremità arrotondata che si adatta perfettamente a un mattarello.
Batteries Required? ‎No
Color ‎Steel
Customer Reviews 4.6 4.6 out of 5 stars 130 ratings 4.6 out of 5 stars
Included Components ‎Pilot Punch 3mm x 4"
Is Discontinued By Manufacturer ‎No
Item model number ‎25017
Item Package Quantity ‎1
Item Weight ‎0.16 ounces
Manufacturer ‎Mayhew
Material ‎Blend
Measurement System ‎Metric
Number of Handles ‎1
Part Number ‎25017
Power Source ‎Hand Powered
Product Dimensions ‎4 x 0.25 x 0.25 inches
Size ‎3mm X 4
Warranty Description ‎Lifetime Warranty

3.6

8 Review
5 Star
77
4 Star
11
3 Star
7
2 Star
2
1 Star
3

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Rick Krull
Works well
Works well for my gunsmithing.
Scritto da: JW
When metric is what you need.
You know, there's not much difference between 2mm and 5/64" (less than 1/1000" difference); but when you're dealing with spring pins (a.k.a. roll pins), it's always best to have as good a fit as you can. This was the right tool for the job. My only complaint is that I wish the handle was longer and the shaft shorter.
Scritto da: MKB
Good
I purchased this so I could remove a pin to change out the grips on my HK VP9. Fit was perfect
Scritto da: Cllzzrd
Grip is nice, it bent the first time I tried to use it
The grip could be longer, the knurling on the grip is nice to hold on to. It bent the first time I used it
Scritto da: If and When
Diameter of shaft wrong
I ordered two of these for a very specific job while working on a Mercedes Benz engine. The diameter needed to be exactly 3 mm. The two punches I received were both stamped as 3 mm but the diameters were different. The difference was big enough to be seen with the naked eye, but I tested with my micrometer and one was larger than 3 mm and one was smaller than 3 mm. The total difference was about 1/2 mm. I could not use either of the two for their intended purpose. I ended up going to Home Depot and finding a suitable nail and bought two of them. The nails worked perfectly and cost much less. Bottom line, if the diameter of these punches is critical to you do not order these because, apparently, the diameter is not critical to the manufacturer.
Scritto da: P. Williams
Works as advertised
I had a compression pin that wouldn’t budge. Tried everything. This loosened it in about 10 seconds. Helps to have the right tool.
Scritto da: AAA MARINE PARTS WHOLESALE
perfect
commercial use-works fine
Scritto da: Kenneth E Turner
I like it.
Decent punch at a decent price.

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart