Legrand/On-Q AC101001 Staffa a bassa tensione a 1 banda, retrofit, retrofit grigio a 1 banda

Name: Legrand/On-Q AC101001 Staffa a bassa tensione a 1 banda, retrofit, retrofit grigio a 1 banda
Brand: On-Q
SKU: 7241871126816
Price: 20.17 EUR
Availability: InStock

Brand:On-Q

3.7/5

€
20.17

DESCRIZIONE DEL PRODOTTO Progettata per l'uso in aperture a banda singola, la staffa girevole LV a 1 banda è ideale per installazioni a bassa tensione come placche a parete trapezoidali e tastiere audio. Destinata a progetti di retrofit, questa staffa si installa rapidamente e facilmente. La staffa presenta un retro aperto e utilizza affidabili staffe oscillanti metalliche per fissare la staffa in posizione.Dettagli del prodotto:Colore: grigioMateriale: lega fusaTemperatura di esercizio (Celsius): (da -40°C a 60°C)RoHS: SìStandard UL: Sì DAL PRODUTTORE Design a banda singola per applicazioni di retrofit

Quantity

Aggiungi al carrello Compra subito

EAN: 7241871126816

Categories: Strumenti e miglioramento della casa, Elettrico, Scatole elettriche, condotti e raccordi, Parentesi,

CERTIFICATO: La staffa a bassa tensione On Q 1 Gang certificata con standard UL. STAFFE DI TENSIONE PIÙ VENDUTE: 1 staffa di tensione Gang è la scelta migliore di Amazon e l'ampia apertura ospita dispositivi di grandi dimensioni e facilita il processo di cablaggio. TAGLIA E COLORE DISPONIBILI: La staffa a bassa tensione è disponibile in diverse dimensioni: tre gruppi (confezione da 2), gruppo singolo, tre gruppi, due gruppi. La sua dimensione è di 10 x 10 x 8 pollici. Il colore verde distingue facilmente l'apertura per i prodotti a bassa tensione. FACILITÀ DI ALLINEAMENTO: nelle staffe di tensione, la plastica rigida mantiene la forma per facilitare l'allineamento durante l'installazione e le affidabili linguette stabilizzatrici laterali lo mantengono allineato con il perno. STAFFA DI TENSIONE: 1 Gang La staffa a bassa tensione ha comode staffe oscillanti metalliche, staffe di fissaggio in posizione.

Batteries Included?	‎No
Batteries Required?	‎No
Certification	‎UL
Color	‎Green
Country of Origin	‎USA
Customer Reviews	4.7 4.7 out of 5 stars 306 ratings 4.7 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item model number	‎AC101001
Item Package Quantity	‎1
Item Weight	‎0.32 ounces
Manufacturer	‎On-Q
Part Number	‎AC101001
Product Dimensions	‎12.99 x 5 x 5.98 inches
Size	‎1 Gang
Style	‎RetroFit
Warranty Description	‎12 months from date of purchase

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Ben S.

Easy to install

Super easy to install, just cut a hole in the drywall and install!

Scritto da: Cullen Wainscott

Good value.

Much better deal than the orange ones you see at depot plus I like the metal clamps versus the plastic.

Scritto da: Brisk2000

Work Well and Do the Job!

I bought a pair of these plastic brackets because they were priced right (better than Home Depot and Lowes). The units I received were 'gray,' not 'green' as advertised. Not a big deal. The reason for my 4 rating is that there are no guide holes near the corners of the frame to help you mark the surface to make a precise cutout. This added a little unnecessary work for me. Also, the top & bottom holes for cover screws were a bit undersized, requiring a little more effort to drive those small screws in. But overall, they work just fine and I would buy them again.

Scritto da: PresumablyMe

Good Bracket. Cutout Template 2.25" x 3.75"

The Legrand 1-gang low voltage bracket itself is good for the intended use. As another reviewer pointed out, it has metal "clamp feet" rather than plastic. And the price was great. For those asking about a cutout template, I made my own on a sheet of paper, easy to do. Requires a pencil or pen, and a ruler/straight edge. And a minimum of one eyeball, Two hands are helpful too :-) For the template, a simple rectangle 2-1/4" wide by 3-3/4" high gives you 1/32" 'wiggle room' on each side of the resulting hole which is plenty. If you want to be EXACT, make the rectangle 2-3/16" x 3-11/16" instead. On one of the long sides of my rectangle I drew a long line inches pass the t=op and bottom cutout lines to act as a wall positioning index line. I also drew a line parallel to the short sides, at the 1-7/8" mid point of the long side. Basically a cross on top the cut out lines. On the wall, I drew a horizontal line, marking the middle of the long side. I also drew a long vertical line marking one vertical edge of where the hole will be. I then taped my cutout pattern so the middle and vertical lines aligned with the lines on the wall. Using my vibrating multi-tool I cut along the pattern lines, inside the line rather than outside the line as the vibrating blade can easily add an extra 1/32" to each side of the opening which I did not want. Result, a hole just slighting larger than this bracket just in case I needed to adjust it's position a little for level.

Scritto da: Amazon Customer

No prob bob

All good. Works as advertised. Exactly what I needed. Less than $2 and shipped to my door. Incredible

Scritto da: Wibbo

Good value; well made; but hard to install -- needs a paper wall-hole template!

Well made and good value for the price, but it would be a five-star product it a wall hole / cutout template was included in the package. It might cost a penny or two more, but it would make installing the product faster and easier with far fewer errors or incorrectly sized holes. If that's too much, include a link for one or a PDF file in the product description so users can print their own. For reference, cutout dimensions are: 2-1/4 inches wide by 3-3/4 inches high with a small variance. There is very little room for error on these sort of old-work boxes, so measure two-three times before cutting.

Scritto da: Carol

Good for hiding speaker wire

We used these to run speaker wire inside the walls. Great product!

Scritto da: andrey55

Good

Good enough quality