0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

LASCO 17-6269 Unione in ottone a compressione con diametro esterno da 3/4 pollici 0,75 pollici

Brand:LASCO

3.4/5

€
41.68

DESCRIZIONE PRODOTTO LASCO Plumbing Specialties 17-6269 è un raccordo in ottone a compressione da 3/4 di pollice. Unione di compressione. Il materiale in ottone dura a lungo. Non per l'uso in applicazioni di acqua potabile potabile. Utilizzare con tubi in rame o plastica. Compressione da 3/4 di pollice. DAL PRODUTTORE LASCO Plumbing Specialties 17-6269 è un raccordo in ottone a compressione da 3/4 di pollice. Unione di compressione. Il materiale in ottone dura a lungo. Non per l'uso in applicazioni di acqua potabile potabile. Utilizzare con tubi in rame o plastica. Compressione da 3/4 di pollice.

Quantity
Aggiungi al carrelloCompra subito

EAN: 0052151122186

Categories: Strumenti e miglioramento della casa, Impianto idraulico grezzo, Tubi, raccordi e accessori, Raccordi per tubi,

Compressione del diametro esterno di 3/4 di pollice. Utilizzare con tubi in rame o plastica. Non per l'uso in applicazioni di acqua potabile potabile. Il materiale in ottone dura a lungo. Unione di compressione.
Batteries Required? ‎No
Brand LASCO
Brand ‎LASCO
Color Copper
Color ‎Copper
Connector Type Union
Connector Type ‎Union
Country of Origin ‎USA
Customer Reviews 4.3 4.3 out of 5 stars 107 ratings 4.3 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Exterior Finish Brass
Exterior Finish ‎Brass
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH 2.25 x 1 x 1 inches
Item Dimensions LxWxH ‎2.25 x 1 x 1 inches
Item model number ‎17-6269
Item Package Quantity ‎1
Item Weight ‎3.84 ounces
Manufacturer ‎LASCO
Material Brass, Plastic, Copper
Material ‎Brass, Plastic, Copper
Measurement System ‎Inch
Part Number ‎17-6269
Product Dimensions ‎2.25 x 1 x 1 inches
Size 0.75 Inch
Size ‎0.75 Inch

3.4

10 Review
5 Star
75
4 Star
7
3 Star
4
2 Star
5
1 Star
10

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: J
In 10 minutes you, too, could get your ice back.
Our new-to-us house came with a fancy fridge with a water dispenser that was painfully slow. My first inclination was to replace the water filter (a whole other story as the old one broke inside requiring the jaws of life to get it out) and be done with it. Sadly, after the effort to extract and replace the filter our flow rate still wasn't what I thought it should be. Tracing the copper line and led me down to the crawl-space where I found a good sized kink (and leak) that somehow went unnoticed. My usual go-to fix is to spend the extra money on a Sharkbite fitting and make quick work of the repair. But with 1/4-in tubing that isn't an option as such items don't exist. Compression unions like this, however, aren't as fast as Sharkbites but they've been around forever and are proven to work. Ten minutes later we were back in business and the flow rate has gone from dismal to adequate. The next step is to replace the saddle valve that's supplying the line in the first place. I'm sure the original installer had good intentions in using a saddle valve, but those things aren't welcome in my home.
Scritto da: Matt
... this union with nylon hose and wasn't all that happy. If the nylon hose isn't perfectly cut straight ...
I used this union with nylon hose and wasn't all that happy. If the nylon hose isn't perfectly cut straight it will compress and come out at an angle and look slightly kinked. I kept thinking I was going to damage the hose as I tightened the fitting or that it will shear easily. The issue is that the hose does not sit over anything inside of the union. I have used fittings where either an insert is placed in the hose or the hose slides over a nipple on the fitting itself and this issue is prevented since the hose is kept perfectly straight. However, for a more rigid hose than nylon I could see this posing no issue with this union.
Scritto da: Erik D Carr
7/16 union high pressure line fix
Nobody had it in stock, didn’t think it’d work held together an electric high pressure power steering line on my 14 Altima without having to pull the subframe and engine to replace the hardline. Hose clamps blew fuel injection pressure lines and connectors blew apart 80-120ish psi I think. Good stuff. Great temporary bypass to move it around till I get the time to fix it right.
Scritto da: Phred
Great for unsolderable repair situations
Great for unsolderable repair situations
Scritto da: autotech
just what I needed
just what I needed
Scritto da: Markie
Got the project done.
Product as described and what I needed.
Scritto da: Gary
Odd size.
This will not fit 3/4" copper pipe. The inside diameter is 3/4". No idea what they are used with.
Scritto da: JPW
easy plumbing
worked as designed and made the job easy
Scritto da: Clive Martin Halligan-Davies
A+
Thanks
Scritto da: Brian Carter
you need to use pipe sealer
did the job it was made for

Prodotti correlati

hot
Fluidmaster B3H18 Connettore scaldabagno, acciaio inossidabile intrecciato - 3/4 filettatura tubo ferro maschio x 3/4 filettatura tubo ferro femmina, lunghezza 45,7 cm
3.5/5

€ 42.95

Fluidmaster B3H18 Connettore scaldabagno, acciaio inossidabile intrecciato - 3/4 filettatura tubo ferro maschio x 3/4 filettatura tubo ferro femmina, lunghezza 45,7 cm
3.5/5

€ 42.95

hot
SharkBite 1/2" x 3/8" Gomito per lavastoviglie a 90 gradi, MNPT, Push to Connect Raccordo idraulico in ottone, tubo PEX, rame, CPVC, PE-RT, HDPE, U281LFA 1/2" x 3/8"
3.8/5

€ 29.46

SharkBite 1/2" x 3/8" Gomito per lavastoviglie a 90 gradi, MNPT, Push to Connect Raccordo idraulico in ottone, tubo PEX, rame, CPVC, PE-RT, HDPE, U281LFA 1/2" x 3/8"
3.8/5

€ 29.46

hot
Fornitura Giant CSFQ0034 Prolunga in ottone conico per tubo nazionale maschio da 3/4 '' pollici 125 LB Applicazioni Pezzo, costruzione in ottone, maggiore resistenza alla corrosione, economica e facile da installare
3.4/5

€ 35.88

Fornitura Giant CSFQ0034 Prolunga in ottone conico per tubo nazionale maschio da 3/4 '' pollici 125 LB Applicazioni Pezzo, costruzione in ottone, maggiore resistenza alla corrosione, economica e facile da installare
3.4/5

€ 35.88

hot
SharkBite 3/4 pollici T per misuratore di temperatura, raccordo idraulico in ottone a pressione, tubo PEX, rame, CPVC, PE-RT, HDPE, 24439 3/4 in.
3/5

€ 92.40

SharkBite 3/4 pollici T per misuratore di temperatura, raccordo idraulico in ottone a pressione, tubo PEX, rame, CPVC, PE-RT, HDPE, 24439 3/4 in.
3/5

€ 92.40

hot
Spina meccanica Cherne 269921, metallica
3.2/5

€ 56.34

Spina meccanica Cherne 269921, metallica
3.2/5

€ 56.34

hot
NIBCO 58072LT 3 Spg x H 90 Street Long Turn Gomito ABS
3.7/5

€ 67.48

NIBCO 58072LT 3 Spg x H 90 Street Long Turn Gomito ABS
3.7/5

€ 67.48

hot
LASCO 17-1701 1/8" filettatura femmina per tubo da 1/8" filettatura femmina valvola a spillo in ottone diritta
3.1/5

€ 28.15

LASCO 17-1701 1/8" filettatura femmina per tubo da 1/8" filettatura femmina valvola a spillo in ottone diritta
3.1/5

€ 28.15

hot
Fernco 3000-22 P3000-22 Giunti speciali schermati Proflex, 2" x 2", cromati
3.2/5

€ 31.72

Fernco 3000-22 P3000-22 Giunti speciali schermati Proflex, 2" x 2", cromati
3.2/5

€ 31.72

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu