0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

LASCO 02-3307 3/4-Inch by 1-3/16-Inch Oval Push-in Paraurti di Ricambio Sedile WC in Plastica Bianca Confezione da 1 (di 2)

Brand:LASCO

3.2/5

€
28.67

DESCRIZIONE PRODOTTO LASCO 02-3307 Sedile WC in plastica bianca Paraurti di ricambio ovali da 3/4 pollici x 1-3 / 16 pollici. Paraurti di ricambio in plastica bianca per sedile WC, 3/4" x 1-3/16" ovale a pressione, 2 pezzi. DAL PRODUTTORE LASCO 02-3307 sedile del water in plastica bianca Paraurti di ricambio ovali push-in da 3/4 pollici x 1-3 / 16 pollici. Paraurti di ricambio in plastica bianca per sedile WC, 3/4" x 1-3/16" ovale a pressione, 2 pezzi.

Quantity
Aggiungi al carrelloCompra subito

EAN: 0052151021045

Categories: Strumenti e miglioramento della casa, Attrezzature per cucina e bagno, Attrezzature per il bagno, Servizi igienici e parti di servizi igienici, Parti di ricambio per WC,

Facile progetto fai-da-te, si adatta di più. Forma ovale. Spingere i paraurti. Plastica bianca. Utilizzato per riparare il sedile del water.
Batteries Required? ‎No
Brand LASCO
Brand ‎LASCO
Certification ‎No
Color White
Color ‎White
Country of Origin ‎USA
Customer Reviews 4.1 4.1 out of 5 stars 526 ratings 4.1 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Finish ‎White Plastic Replacement Bumpers
Included Components ‎LASCO 02-3307 3/4-Inch by 1-3/16-Inch Oval Push-in Replacement Bumpers White Plastic Toilet Seat
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎02-3307
Item Package Quantity ‎1
Item Weight ‎0.317 ounces
Manufacturer ‎LASCO
Material Plastic
Material ‎Plastic
Operation Mode Manual
Operation Mode ‎Manual
Part Number ‎02-3307
Product Dimensions 0.88"L x 0.62"W
Product Dimensions ‎0.63 x 0.88 x 0.75 inches
Product Dimensions ‎0.88"L x 0.62"W
Shape Oval
Shape ‎Oval
Size ‎1-Pack
Style Plastic-Oval
Style ‎Plastic-Oval
Warranty Description ‎Larsen Supply Product Warranty, is one year from purchase date. Warranty covers parts only. Product must be installed per manufacturers specification

3.2

12 Review
5 Star
60
4 Star
16
3 Star
10
2 Star
4
1 Star
10

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Gary Green
Fast, neat and easy to install
This item was just what I needed. Easy ordering and quick delivery at a good price.
Scritto da: RS
Not exact but fine
These fit and popped right into the holes from the old ones. The only issue was that these are a bit higher profile than the original ones that came with the seat. When I first put them on it felt like the seat was up higher in the front on an incline. Not much but enough to notice. You get use to it quickly though. Putting them on also gave me a reason to take the seat off completely to do one of my 4 times a year detail seat and attachment cleaning. Yes, I'm one of those people. If you've never done it, you'll be amazed at what lingers under the hinges. Yuck! I'm glad I didn't have to spend $40-$60 on a new seat. I can't find a seat with the decorative attachment button covers like ours. The new ones are ugly. Our seat is about 25 years old. Hope this review helps.
Scritto da: Hilfer
Little bigger, but still easy to install????
The picture that comes up has the inside nails looking like a tip of a screw driver, when it arrived they were cylinder shaped. This was not a problem, it was easy to install. They are a bit thicker and taller than the ones originally installed. I ended up buying a second set only because The One I replaced was bigger, than the rest of the old ones. So to make it even I replaced the other 3 remaining bumpers. No problems easy install.
Scritto da: Lemontwistersister
Cost effective. Take acurate measurements of old bumper space between helps.
Thought would fit toilet seat intended but posts were slightly thicker and i needed to whittle down with an exacto knife. Wasn't hard just do slow from top down into underside. Took small slices off and it fit snug into holes ????Mom's building wanted to charge her $25 for new seat ????.. because if live in a senior building and you " break " anything or have a bulb blow out resident has a list to see what's replacement costs out of their pocket. I get it if resident is destructive but if can replace cheaper ( bulbs/ handles/ toilet bumpers ) worth it . Hope this helps. Oh if can use a centimeter ruler( look for cm on 1 side of ruler if have ) it helps to get diameter of hole . I was of by 3 cm hence shaving a bit off. For $5 worth it than $25 new seat.
Scritto da: Lynsie Walker
Good fit, easy to install
Easy to pop on my existing toilet seat.
Scritto da: Shawn
Too narrow between posts for my toilet seat.
I was able to make these fit by using my manicure set to file away some of the inside on each post. After I did that they snapped right in!
Scritto da: George
Difficult to install
The pins are solid not as shown on Amazon website. Had to hammer into place. They do not sit flush.
Scritto da: R.Fisher, Ph.D.
It's a bumper. Here's a drawing.
These are hard plastic toilet seat bumpers. If they fit your seat, they are fine. They are not rubber or rubber coated. Because of the vague description and the 8 million or so poorly asked or answered questions about the dimensions of these bumpers, I decided to make a drawing and post it. This dimensional drawing is not precisely to scale, but close. The dimensions are as I measured them from one of the two bumpers in the Lasco 02-3307 package that I received today. The imperial dimensions are to the nearest 1/16". The metric dimensions are to the nearest 0.1mm. I am not the seller. I cannot, and do not, guarantee that the bumpers you receive will match the ones that I received.
Scritto da: Emma Swinemar
They fit existing bumpers, no drilling required
The pads fit in existing holes so installation was easy. Too early yet for proper review. Will have to see how well they last.
Scritto da: Jim R.
Have A Seat.
These were exactly what i was looking for. They fit perfectly.
Scritto da: charlie
good fit
Used to replace two front bumpers on an old toilet seat. Fit just as original.
Scritto da: Alan C.
Well domestic
Renpvates seat. Easily used

Prodotti correlati

hot
KOHLER K-85040 Dado di ancoraggio, 1/4-20
3.3/5

€ 35.31

KOHLER K-85040 Dado di ancoraggio, 1/4-20
3.3/5

€ 35.31

hot
American Standard AS738756-0070A Champion 4 Guarnizione serbatoio/ciotola, confezione da 1, nera
3.7/5

€ 56.48

American Standard AS738756-0070A Champion 4 Guarnizione serbatoio/ciotola, confezione da 1, nera
3.7/5

€ 56.48

hot
KOHLER 1134260-0 Parte, Bianco
3.4/5

€ 64.23

KOHLER 1134260-0 Parte, Bianco
3.4/5

€ 64.23

hot
Kohler 85407-0 Parte di ricambio, bianco
4.1/5

€ 124.87

Kohler 85407-0 Parte di ricambio, bianco
4.1/5

€ 124.87

hot
American Standard 7381148-200.0200A Bolt Cap Kit, EZ Install Toilets-White
3.4/5

€ 25.26

American Standard 7381148-200.0200A Bolt Cap Kit, EZ Install Toilets-White
3.4/5

€ 25.26

hot
Kohler 84676 Parte di ricambio piccola
3.7/5

€ 22.76

Kohler 84676 Parte di ricambio piccola
3.7/5

€ 22.76

hot
Toto THU131 Set di 10 guarnizioni da serbatoio a tazza per WC CST
4.1/5

€ 67.80

Toto THU131 Set di 10 guarnizioni da serbatoio a tazza per WC CST
4.1/5

€ 67.80

hot
KOHLER 1133070 Kit revisione paraurti Vikrell Swirl
3.6/5

€ 24.31

KOHLER 1133070 Kit revisione paraurti Vikrell Swirl
3.6/5

€ 24.31

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu