KFI Products 100660 Supporto per verricello per Polaris RZR/RZR-S/RZR-4

Name: KFI Products 100660 Supporto per verricello per Polaris RZR/RZR-S/RZR-4
Brand: KFI Products
SKU: 0705105363950
Price: 70.61 EUR
Availability: InStock

Brand:KFI Products

3.6/5

€
70.61

Nuovo kit KFI Multi-Mount per i seguenti Polaris ATV: Tutti i Polaris Midsize Ranger 400 Tutti i Polaris Midsize Ranger EV 2011-2013 Polaris Midsize Ranger 500 2011-2013 Polaris Midsize Ranger 500 Crew 2013 Polaris Midsize Ranger 800 il ricevitore anteriore da 2 pollici in dotazione. Questo kit è per lo stile del corpo più recente delle macchine sopra elencate Il kit include quanto segue: (1) Ricevitore anteriore superiore da 2 pollici che si monta nella posizione mostrata nell'immagine (# 100875). (1) Ricevitore da 2 pollici Supporto per verricello (#100620) (1) Connessione rapida da 20 pollici che viene collegata ai cavi del verricello (#QC-20) (1) Connessione rapida da 48 pollici che va dal contattore del verricello alla parte anteriore del Ranger (#QC-48) (1) Connessione rapida da 120 pollici che va dal contattore del verricello alla parte posteriore del Ranger (#QC-120) (1) Perno di aggancio standard da 5/8 di pollice Progettato per funzionare con i seguenti argani: (Nota: questo supporto richiede una staffa per passacavo a rullo fornita con la maggior parte degli argani disponibili. Se il kit dell'argano non viene fornito con una staffa per passacavo, è necessaria la parte KFI n. 00 / 1.5ci / 2.5ci / 2.5ce / 2.5s / 3.0ci / 3.0ce / 3.0s Warn : RT15 / RT25 / RT30 / XT15 / XT25 / XT30 Warn : 4.0ci / RT40 / XT40 (utilizzare la staffa passacavo fornita con il verricello Warn) RAMSEY : ATV2500 / ATV3 000 SUPERWINCH: tutti i verricelli ATV e UTV VENOM: tutti i verricelli ATV MILE MARKER: tutti i verricelli ATV CHAMPION: C40252 (verricello da 4500 libbre) CHAMPION: tutti i verricelli ATV MOLTI ALTRI SIMILI A QUANTO SOPRA (chiamare per i dettagli) 0 pollici X 6.600- Verricello ATV standard Modello di bullone a 2 fori di 3.100Specifiche: 100 percento MADE IN USA Costruito in acciaio da 3/16 di pollice A differenza di tutti gli altri concorrenti, i prodotti sono sabbiati con perline metalliche prima di essere verniciati a polvere per la migliore preparazione della finitura possibile.

Prodotto non disponibile

EAN: 0705105363950

Categories: Settore automobilistico, Accessori Esterni, Prodotti per il traino e verricelli, Vieni con noi,

100% PRODOTTO NEGLI STATI UNITI.

Brand	‎KFI Products
Customer Reviews	4.5 4.5 out of 5 stars 110 ratings 4.5 out of 5 stars
Exterior	‎Painted
Is Discontinued By Manufacturer	‎No
Item model number	‎100660
Item Weight	‎1.8 pounds
Manufacturer	‎KFI Products
Manufacturer Part Number	‎100660
Model	‎KFI Products 100660
OEM Part Number	‎100660
Product Dimensions	‎8 x 6 x 10 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: LL Dude

Perfect fit, very easy to install.

I bought this to install on my 2011 Polaris RZR 800. I used it in conjunction with a Harbor Freight 3500lb winch. This KFI system was a perfect fit. It bolted right on, very little effort. The directions were very easy to follow. It comes with all the hardware necessary for a perfect install. I recommend this for anyone planning on doing a self install of winch on their UTV. It took me a whole 20 - 25 minutes to get it installed.

Scritto da: likalarry

Good winch mount for the RZR 800

The winch mount fit my 2013 Polaris RZR 800 (the basic version) perfectly, tho the Amazon site stated it would NOT fit. The mount is very sturdy, well built and powder coated very nicely. The photo instructions could have been better, but considering how crowded it is in there, the photos do a decent job. The thing to consider when putting a winch on the RZR: With this mount, the winch will be hidden behind the various plastic front end parts, so it will be difficult to see the winch drum while retrieving the cable. This may make it more difficult to guide the cable into neat rows on the drum. For that reason, I suggest giving serious consideration to using a winch with braided nylon cord instead of cable on your RZR. Yes, you can still easily reach the drive selector knob on the end of the winch drum. As far as fit, I had no problem fitting a Warn RT 30 to this mount.

Scritto da: Roland James

This thing outlasted the winch it held.

I bought a cheaper winch off of Ebay, and as expected the universal mounting plate included, did not work on my RZR 800. So I purchased this. I had to drill a bit to get this to work right, as the holes did not line up like they should have, but once installed, it was solid. I have had this on my machine for several months now, and it has not moved. I destroyed the wince itself, but this thing will hold a new one soon enough. Certainly worth the price, and five stars if it was drilled out right from the start, but alas it was not, and for the headaches it caused during the install, I remove a star.

Scritto da: jason feil

Fits 09 RZR 800S

This fit my 09 RZR 800s perfectly. I have had other cheaper mounts that did not fit with out modifications. It is pretty easy to install, but as others have said there is not much room to mount the winch to the brackets, which is no fault of the manufacturer. I would but again if needed.

Scritto da: DeAnna C.

Works and fits well

Fit very good the nut that is hooked onto the angle bars made install easy. Only complaint is the angle bars could be a little heavier but I think they will work fine Thanks

Scritto da: Amazon Customer

Good product.

Seems to be a good product. A little hard to install the front bolts for the fair lead but that's just because there isn't much room to work. I used it with a Harbor Freight winch. I have had good luck with every KFI product I have used.

Scritto da: Starman

A very well made and sturdy mount

It took a small amount of time to understand how to put this together (pictures provided in instructions were not all that clear) but in the end I got it done. Otherwise this is a great winch mount. The instructions had me remove a few bolts that did absolutely nothing to aid installation but it didn't hurt anything either. I have yet to put it to use but it does look like a very well made and sturdy mount.

Scritto da: Donald Wolfgang

Great for my RZR 800. But watch your roller fairlead

I bought this for my 2009 RZR 800 and it fit great. Just a heads up the stock fairlead I got with my winch was to small and I need to order another fairlead so just keep that in mind when ordering. Was not a big deal.