0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

Jonard Tools CT-200, strumento di compressione universale con doppia testa per cavo coassiale connettore F universale F, BNC, RCA

Brand:JONARD TOOLS

3.7/5

€
92.99

Lo strumento di compressione universale Jonard Tools è progettato per l'uso su connettori F, connettori BNC e connettori RCA. Lo strumento è ideale per l'installazione di cavi di rete CATV e CCTV e presenta quanto segue: Doppia testina e manopola di regolazione per accogliere vari connettori come RG6 e RG11 in modo rapido e semplice (i connettori BNC devono avere una lunghezza minima di 1,5 pollici) Regola guida sul lato dell'utensile per facilitare le regolazioni dell'utensile Realizzato in resistente acciaio ad alto tenore di carbonio con finitura in ossido nero Le impugnature in plastica offrono un'esperienza confortevole ed ergonomica Connettori compatibili: PPC: CMP6, CMP6Q, CMP59Q, CMP11, EX6XL, EX59XL, EX59XLHE, EX6XLW9, EX6LP, EX7, EX7N716, EX11, EX11N716, EX320QR, EX320N716, EX6/59, EX6W8, EX59HE, EX6P, EX11N716PLPLUS, CMPRCA6, EXBNC6, EXBNC9167 Thomas And Betts Belden Snap-N-Seal: SNS1P6RMBL, SNS1P6RMBK, SNS1P6RMY , SNS1P6RMR, SNS1P6RMW, SNS1P6RMG Icona Dig: DS6, DS59, DS59Q, DS11, DS7 Corning Gilbert Ultra Ease: GF-UE-59, GF-UE-59Q, GF-UE-6, GF-UE-6Q, GF-UE-5. 1, RCA-UE, BNC-UE, SOL-BNCF-FM, GA-BNC-UR-59 HEC, GF-UR-6, GF-UR-59, GAF-UR-11 MH, GF-URS-59 volte Comunicazioni in fibra: TFC-QC2-06-3, TFC-QC2-06Q-3, TFC-QC2-06U-3, TFC-QC2K-06-3, TFC-QC2T-06Q-3, TFC-QC2T-06U-3 , TFC-QC2Q5-06U-3, TFC-QC2-59-3, TFC-QC2-59Q-3, TFC-QC2K-59-3, TFC-QC2K-59Q-3, TFC-QC2H-59-3, TFC -QC2-11U-3 Caledon: CX3-F596, CX3-IECF, FM-RG11-CX3, FM-RG7-CX3, FM-56-CX3 3.9, FM-59-CX3 3.7, BNC CX3, F -CX3Più molte altre marche e stili di connettori F, RCA e BNC!

Quantity
Aggiungi al carrelloCompra subito

EAN: 0811490012035

Categories: Prodotti industriali e scientifici, Strumenti e miglioramento della casa, Utensili elettrici e manuali, Utensili manuali, Crimpatrici per fili,

DESIGN CONFORTEVOLE: le impugnature in plastica dal design ergonomico offrono un'esperienza confortevole ed efficiente. ALTA DURATA: Realizzato in acciaio ad alto tenore di carbonio con finitura in ossido nero per una maggiore durata e durata. REGOLAZIONI ACCURATE: regola guida sul lato dell'utensile per facilitare regolazioni precise e accurate dell'utensile. FUNZIONAMENTO FACILE: doppia testa e quadrante di regolazione per accogliere vari connettori come RG59, RG6, RG7 e RG11 in modo rapido e semplice (i connettori BNC devono essere lunghi almeno 1,5). COMPATIBILITÀ UNIVERSALE: progettato per l'uso su connettori F, connettori BNC e connettori RCA. Lo strumento è ideale per l'installazione di cavi di rete CATV e CCTV.
Country of Origin China
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer No
Item model number CT-200
Manufacturer Jonard Industries
Product Dimensions 0.45 x 4.13 x 1.67 inches; 15.52 Ounces

3.7

13 Review
5 Star
81
4 Star
10
3 Star
5
2 Star
3
1 Star
1

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Teron Curley
awesome but only lasted 6 months
I'm a full time cable installer. This tool is the most comfortable and fits in the most places out of the 3 crimpers I've bought on Amazon. However it only lasted about 6 months of full time use. Eventually the bolt that holds bottom jaw on broke off. I crimp ~40 rj6 ends a day Monday-Friday. Change the bolt out with a harder metal bolt and this might be a perfect tool.
Scritto da: J&A
high quality, annoying to use
I was a cable technician for 4 years and am now an electrician who still occasionally deals with coaxial. These are obviously very well made but the compression depth-adjust wheel DOES NOT stay in place once set. I am constantly repositioning it to the right size for RG6 F-connectors. Very annoying to deal with. Amazing tool in every other way. If you’re doing almost completely F-connectors, just get a Jonard that adjusts with allen keys. I will in 20 years when this thing breaks or, if I’m lucky, becomes lost.
Scritto da: Entropy
No professional needed; custom RG59 runs made easy!
Being handy with tools, I decided to make my own RG59 cables (for cable TV) for custom runs inside my house. I refuse to pay what brick and mortar stores charge for 100-foot lengths when I know I can create better cables for a ton less. It is critical that for best results you use quality compression fittings; avoid going the cheap route on those. In my opinion, if you’re contemplating buying this product, you already know this, and will likely pair this tool with some PPC EX6WPLUS compression connectors like I did. One thing to realize when buying this particular tool is that it is completely made of metal and therefore hefty; this is a professional’s tool, for professionals who do this type of work day-in and day-out. This explains the relative increase in cost versus cheaper (plastic) options which although offer a much wider range of compatibility for performing other types of compression fittings, are not as well built or have as nice a finished product as the Jonard boasts. Anyway, knowing that I’d only ever be running RG59 in my house, I decided on the Jonard instead of the plastic multi-tool options, mostly because of Jonard’s reputation of a good quality tool company that provides a lot of specialty tools for the trades. Because of this, I didn’t mind paying a little extra for a tool that will likely outlast my lifetime and will consistently give me good, tight compression fittings every time, which is exactly what happened when I used this tool with the PPC fittings I purchased. One point of caution: Due diligence is needed to ensure you are using this tool properly. I advise new users to look on YouTube for videos on how to use this tool in conjunction with a quality universal cable stripper like the Jonard UST-500. If you do not prep your RG59 cable properly before using the CTF-300 compression tool, you are going to have a bad time. Properly prepping your cable will make creating your own custom runs of RG59 a real breeze. As with anything, experience is king, so I recommend users to practice a few times using this compression tool to get a feel for it. Just grab a throw away piece of RG59, prep it, and fit it with a compression fitting. A good tip to remember, as with any tool, is to let the tool do the work. Done properly, there should be no reason why a user will need to strain or struggle to compress a fitting with this tool, as the tool practically does it on its own with minimal effort on your part. Anyhow, I am very pleased with the Jonard CTF-300 compression tool, and highly recommend it.
Scritto da: Steve CFII/MEI
Very nice!
This works well and is built like a rock.
Scritto da: johnsantic
A professional tool for great results
This is a professional-quality tool that should last forever. It has two extra features that other cheaper brands don't have. Most importantly, the "stroke" of the compression action is adjustable. There are different kinds of compression fittings, including full-size and mini-size, and they require different settings for the compression stroke. The knurled screw easily adjusts the tool to fit different length coax fittings. The tool also has a triple head that can be switched for F, BNC, or RCA fittings, plus the usual rotating collar at the end for BNC or F/RCA. I have made-up lots of coax fittings around the house using cheap twist-on connectors, and not only does it take a long time, but the quality and durability is always questionable. The Jonard tool is super-fast (literally a few seconds to compress the fitting), and the professional-quality fittings are much more durable in the long run. I bought a bag of PPC EX6XL coax fittings along with this tool; they are not expensive, are very good quality, and are very easy to use and compress. I also got the Jonard UST-500 cable stripper, which works well and greatly speeds up the process of terminating coax.
Scritto da: Mark
Excellent
No doubt, this is a high quality tool. Very well made. Probably over kill for home use but I'm a sucker for quality. I just made two F-type coax connections with ease. One on a standard RG-6 cable, and the other on a quad shielded RG-6 cable. Worked like a charm with very little effort. The tool is very easy to adjust. I used the PPC EX6plus connectors bought here: http://www.amazon.com/gp/product/B00B8CISSU/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1 One thing to note, this connector used almost all the remaining compression length of the tool(the tool opens up a lot more than this to get the part in) due to this connector being on the short side of various connectors available... I can adjust the tool just a little beyond the required compression depth for this connector. All in all, I'm happy with the purchase and expect this tool to last a life time. For reference, the connector I used measured about 1.25 inches in length before compression. After compressing it, it got shorter by around 3/16 of an inch.
Scritto da: Eric
Sloppy
When compressing a F connector sometimes the tool pushes the connector at an angle and can break the connector. It takes time but you can ensure a good compression by holding the tool absolutely centered. Also the depth adjustment is so loose it needs to be monitored between use as to not overcompress the connector. Not my favorite tool, I have had better.
Scritto da: JR
Needed this for PPC EX6PLUS, F Connectors
The crimping tool I had wasn’t compatible with the F connectors I was using (PPC EX6PLUS), so after doing a little research someone recommended this adjustable crimper for use with them. While it was a bit more than I would have liked to have spent (around $40), it turned out to be well worth the money. I wasted one connector playing around and adjusting the tool, but once I had it set it worked like a dream. I’ve only used it with F connectors so far, but it does RCA & BNC as well, which I’m curious to try out.
Scritto da: John S.
Very Good
Quality
Scritto da: kessler
semi-pro, 100% concept, 75% building materials
delivery was so and so. first item lost after 21 days since dispatch, second item arrived by express delivery the next day after talking to amazon customer service. great people over there btw. my advice: use express delivery service! the item itself contains plastic handles bolt onto steel frame and some aluminum alloy parts (universal adapter and the rotary wire guide). not so good, those are exactly the pressure points involved in the compression process. hope they will last, otherwise the tool will become useless. made in taiwan, under US pattent. you also need a cable stripper , buy a good one, it counts for about 50% of the job. avoid chinese stuff. the compression dial is helpful, takes a bit to get used to, so prepare to ruin a plug or two in the training process. i give 4 stars out of 5, because of the mixed construction materials. 5/5 is for all steel pro tools. this is semi-pro in my opinion, but is better built than the rest out there.
Scritto da: Amazon Customer
Five Stars
Great quality, needed to replace the one I lost.
Scritto da: Grég
parfait
bon produit
Scritto da: Francois Mailly
Five Stars
Produit d'excellente qualité.

Prodotti correlati

hot
Klein Tools VDV226-011-SEN Crimpatrice, crimpatrice per cavi dati modulare a cricchetto all-in-one/spelafili/troncafili, per crimpatrice RJ45, CAT5e, CAT6, CAT6A, cricchetto dati RJ45
3.6/5

€ 70.96

Klein Tools VDV226-011-SEN Crimpatrice, crimpatrice per cavi dati modulare a cricchetto all-in-one/spelafili/troncafili, per crimpatrice RJ45, CAT5e, CAT6, CAT6A, cricchetto dati RJ45
3.6/5

€ 70.96

hot
SharkBite Pinza a crimpare PEX da 3/8 di pollice a 1/2 a 3/4 di pollice, crimpatrice tascabile, 23383 Argento da 3/8 di pollice, 1/2 di pollice e 3/4 di pollice
2.7/5

€ 75.20

SharkBite Pinza a crimpare PEX da 3/8 di pollice a 1/2 a 3/4 di pollice, crimpatrice tascabile, 23383 Argento da 3/8 di pollice, 1/2 di pollice e 3/4 di pollice
2.7/5

€ 75.20

hot
Strumento di crimpatura per tubi flessibili Amflo 855
3.8/5

€ 219.99

Strumento di crimpatura per tubi flessibili Amflo 855
3.8/5

€ 219.99

hot
Pinza crimpatrice TRENDnet, crimpatrice, taglia e spela, per qualsiasi cavo Ethernet o telefonico, taglierina e spelafili integrati, 8P-RJ-45 e 6P-RJ-12, RJ-11, struttura interamente in acciaio, nero, TC- CT68
3.7/5

€ 40.43

Pinza crimpatrice TRENDnet, crimpatrice, taglia e spela, per qualsiasi cavo Ethernet o telefonico, taglierina e spelafili integrati, 8P-RJ-45 e 6P-RJ-12, RJ-11, struttura interamente in acciaio, nero, TC- CT68
3.7/5

€ 40.43

hot
Jonard Tools TCC-1022 Crimpatrice terminale e taglierina, 9"
4.1/5

€ 61.93

Jonard Tools TCC-1022 Crimpatrice terminale e taglierina, 9"
4.1/5

€ 61.93

hot
Klein Tools 86520 Crimpatrice a 5 lame per condutture, tubi e lamiere, acciaio calibro 24, acciaio calibro 28, confezione da 1
3.7/5

€ 71.15

Klein Tools 86520 Crimpatrice a 5 lame per condutture, tubi e lamiere, acciaio calibro 24, acciaio calibro 28, confezione da 1
3.7/5

€ 71.15

hot
IDEAL Industries, Inc. 30-500 Crimpmaster Tool con set di matrici per terminali isolati, crimpatrice per terminali isolati da 22-10 AWG, 1 crimpatrice a cricchetto con set di matrici
3.2/5

€ 151.64

IDEAL Industries, Inc. 30-500 Crimpmaster Tool con set di matrici per terminali isolati, crimpatrice per terminali isolati da 22-10 AWG, 1 crimpatrice a cricchetto con set di matrici
3.2/5

€ 151.64

hot
Lincoln Electric KH538 Lug/Cable Crimping Tool (confezione da 1), nero
3.7/5

€ 53.51

Lincoln Electric KH538 Lug/Cable Crimping Tool (confezione da 1), nero
3.7/5

€ 53.51

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu