Irwin Tools 49904 Utensili industriali I-100 Punta a trivella da 1/4".

Brand:Irwin Tools

3.4/5

€
26.70

DESCRIZIONE PRODOTTO IRWIN 49904 AUGR BIT I-100 1/4 X 7-1/2 DAL PRODUTTORE Irwin Industrial Tools 49904 Coclea I-100 da 1/4 di pollice. Per fori veloci, ruvidi o puliti e precisi, l'ampia linea di punte per foratura del legno di Irwin fornisce all'utente i migliori strumenti disponibili per ogni applicazione per soddisfare le proprie esigenze di foratura del legno.

Quantity

Aggiungi al carrello Compra subito

EAN: 0000025534306

Categories: Strumenti e miglioramento della casa, Utensili elettrici e manuali, Parti e accessori per utensili elettrici, Parti e accessori per trapani elettrici, Punte da trapano a coclea, Punta del trapano,

Tutti i bit hanno una lunghezza di torsione di 4-1/2 pollici e una lunghezza complessiva di 7-1/2 pollici. La punta a vite grossolana fornisce una noiosa rapida in legni duri e teneri. Il tagliente a sperone singolo incide la circonferenza del foro per una finitura più liscia. Le terre larghe mantengono la punta dritta mentre perfora il foro. Le scanalature sono rettificate dietro i bordi per convogliare i trucioli all'interno della punta e lontano dal diametro esterno, producendo un taglio più veloce e pulito. Il design centrale solido offre una rigidità extra durante la noia. AUGR BIT I-100 1/4 X 7-1/2. AUGR BIT I-100 1/4 X 7-1/2. AUGR BIT I-100 1/4 X 7-1/2. AUGR BIT I-100 1/4 X 7-1/2. AUGR BIT I-100 1/4 X 7-1/2.

Assembled Diameter	‎1.25 Inches
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Irwin Tools
Brand	‎Irwin Tools
Color	‎Multi
Customer Reviews	4.4 4.4 out of 5 stars 210 ratings 4.4 out of 5 stars
Cutting Diameter	‎1.25 Inches
Included Components	‎AUGR BIT I-100 1/4" X 7-1/2"
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	8.1 x 7.1 x 0.9 inches
Item Dimensions LxWxH	‎8.1 x 7.1 x 0.9 inches
Item model number	‎49904
Item Package Quantity	‎1
Item Weight	‎1.06 ounces
Manufacturer	‎IRWIN
Material	Blend
Material	‎Blend
Measurement System	‎Metric
Minimum Bore Diameter	‎4 Inches
Part Number	‎49904
Product Dimensions	‎8.1 x 7.1 x 0.9 inches
Shank Type	Straight
Shank Type	‎Straight
Size	‎One Size
Style	‎1/4"
Surface Recommendation	‎Nonferrous,Steel,Wood
Tool Flute Type	Straight
Tool Flute Type	‎Straight

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Alex A.

It is a drill bit

Works as designed, straight and sharp. All you need from a drill bit.

Scritto da: An Informed Buyer

To make it less aggressive, drill a pilot hole first

This Irwin bit is aggressive because of the spiral tip that sucks the bit into the wood. That's not always a good thing, because drilling fast near the edge can crack the wood, and the exit hole doesn't look clean. The Irwin Speedbor and Bosch Daredevil bits are even more aggressive. I was tempted to go back to my spade bit, which is slow but controllable. I found a trick to make the Irwin bit less aggressive -- by drilling a pilot hole first. That way the spiral tip doesn't have any wood to grab onto and doesn't pull the bit in. I can then control how fast to drill by apply pressure myself. The size of the pilot hole is as large as the largest part of the spiral bit. To make a clean exit hole, I stop drilling about 1 inch before the end. Then I drilled back from the other side, using the pilot hole as the insertion point. With the pilot hole, the 3/4" bit even works with my battery powered drill (3/8" chuck), although it stalls often and the battery is nearly drained after drilling a single 8" hole. For those of you who don't have a 1/2" drill, this is method might work if you only need a hole or two.

Scritto da: Joe L.

Did not stay sharp

This cut through like butter for the first 7 or 8 studs, then it went dull and had to force it through for the rest. Seems like it went dull pretty quickly.

Scritto da: darkwing duck

and using this Auger Drill Bit with my Dewalt power drill got the 1/2 of my job done quickly and easily. It really wasn't long or strong enough to ...

I needed to drill holes in a fairly large tree stump, and using this Auger Drill Bit with my Dewalt power drill got the 1/2 of my job done quickly and easily. It really wasn't long or strong enough to get more than 6 inches deep into the stump, I had also purchased DEWALT DW1614 1/2" x 12" Black Oxide Drill Bit which as a secondary tool, allowed me to get 10-12 inches into the stump, which was perfect for the stump remover granules to get loaded in. When attempting to use the Dewalt black oxide drill bit as the initial tool to put a hole in the tree, it was very difficult, and at the same time, it was very difficult to use the Irwin Auger Drill Bit to go deeper into the stump.

Scritto da: Stmwnc

A Great Drill Bit when you Need It - I highly recommend Irwin Drill Bits

I like Irwin drill bits and that is what I purchase when I need a different size or a replacement for worn bits. Irwin drill bits are very well made and last a Long Time. I have used this bit for drilling in wood, metal, and plastic as well as an auger when I needed to put a stake in the ground. You need to use a pickaxe in our yard as the ground is so hard.

Scritto da: Bobby

Good at first

Great at first. Dulled quickly boring white oak.

Scritto da: William Klein-pells

Cuts fast and easy.

I was given 40 6”x6”x48” green treated timbers for steps down a hill. Needed to drill a couple 3/8” holes to put rebar through each of them. This auger bit cuts through them easily and cleanly with my DeWalt battery powered drill right on site so I didn’t need to haul them all to my garage. Outstanding’

Scritto da: Very Happy in Sherburne, NY

Longest lasting drillbit

These are the only drill bit to use if you want perfections every time !!! My husband has been building wagons, chicken coops, carts, storage sheds for over 50yrs. out of different woods. Every other brand of drill bit he has tried or had to use when he couldn't get Irwin. has either bent or not lasted very long. He swears by the Irwin brand for all his drilling needs.

Scritto da: online customer

Satisfactory

Satisfactory and adequate usage. Thank you.

Scritto da: TP

The bit I got is not balanced/centered properly, meaning ...

The bit I got is not balanced/centered properly, meaning when it is in the drill and turning, the screw tip orbits around the center axis instead of staying in the center. I have this problem in two different drills. If you are timber framing and trying to cut a plumb hole, I find this makes it more difficult.

Scritto da: Bob G Archer

Good quality

Good quality drill bit

Scritto da: Alexandre

Great

Works great!

Scritto da: Marlene Chiree

Would buy again

Good bit, fast shipping