BOSCH CST1 1/2 poll. Svasatore 1/2 rivestito in titanio in acciaio ad alta velocitÃ

Name: BOSCH CST1 1/2 poll. Svasatore 1/2 rivestito in titanio in acciaio ad alta velocitÃ
Brand: BOSCH
SKU: 0000346334111
Price: 28.86 EUR
Availability: InStock

Brand:BOSCH

3.7/5

€
28.86

DESCRIZIONE DEL PRODOTTO Con l'adattatore per martello perforatore BOSCH HA1030 da SDS-max a SDS-plus, l'utente ha l'opportunità di estendere la versatilità di un martello perforatore SDS-max senza dover portare con sé uno strumento aggiuntivo. L'adattatore consente di utilizzare gli accessori SDS-plus con uno strumento SDS-max. L'adattatore è compatibile con altre marche di martelli perforatori SDS-max. Questo robusto adattatore soddisfa le esigenze dei cantieri professionali. DAL PRODUTTORE La linea di svasatori Bosch è ideale per sbavare e smussare aperture in fori preforati. Ottimo per gli appaltatori elettrici, idraulici e HVAC. Gli svasatori Bosch tagliano la maggior parte dei materiali in modo pulito e preciso. Con acciaio ad alta velocità standard e punte rivestite in titanio super duro, questi svasatori si comportano alla grande anche nei materiali più duri.

Quantity

Aggiungi al carrello Compra subito

EAN: 0000346334111

Categories: Strumenti e miglioramento della casa, Utensili elettrici e manuali, Parti e accessori per utensili elettrici, Parti e accessori per trapani elettrici, Punte svasate, Punta del trapano,

Il tagliente riaffilabile consente una maggiore durata dell'utensile. La scanalatura posteriore sbava automaticamente i fori. Elimina chiacchiere e vibrazioni. Doppio flauto bilanciato. Il punto di partenza automatico inizia al contatto.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	BOSCH
Country of Origin	‎USA
Customer Reviews	4.7 4.7 out of 5 stars 528 ratings 4.7 out of 5 stars
Finish	‎Titanium
Finish Type	Titanium
Item model number	‎CST1
Item Package Quantity	‎1
Item Weight	‎0.634 ounces
Manufacturer	‎Bosch
Material	High Quality Steel
Material	‎High Quality Steel
Part Number	‎CST1
Shank Type	SDS-Max
Size	‎1/2 in
Style	‎High Speed Steel
Tool Flute Type	Straight
Warranty Description	‎No

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Blind Lemon Jefferson

Cuts well

I used the BOSCH CSH1 1/2-Inch HSS Countersink to enlarge screw holes on some door hinges so I could install larger, longer stronger screws and pull up a sagging door. It worked great.

Scritto da: Stephen B.

well designed, seems strong and sharp so far

well designed, seems strong and sharp so far

Scritto da: mary lupo

pretty decent bit

this is for a drill or router. I use it for reaming some space for bevelled flat screw. Price was decent enough

Scritto da: jerry

used for countersinking bolts in aluminum panels, works great

great product, counter sunk more than 200 holes in aluminum and still going strong

Scritto da: Mariachi

Works for brass casses

Use it to ream out primer pocket crimps. Works as intended

Scritto da: Fisqual

Doesn't last

I've run through a lot of these countersinking the screws on my DDR machine and of all the brands I've gotten from the hardware store or harbor freight this one is by far the worst. Right out of the box it cut almost as badly as the worn out one I just replaced. After slowly sinking about 5 holes into 1/4" stainless steel it was doing worse than the worn Ryobi bit that I drilled well over 20 holes with. Don't fall for the Bosch name this is just more brand engineered junk like has become so common from Bosch lately.

Scritto da: Amazon Customer

Great design and decent quality

The design and material of this countersink is great; the five flute design minimized chattering, and it's made of good, hard steel, suitable for use in metal as well as wood. The design is especially important when using it with a hand drill, as it will cut a smooth hole even by hand (though obviously results are better with a drill press). The quality is only decent; as other reviewers have noted, it came with some small burs and nicks in the cutting edges. Not enough to make much difference cutting in wood, but it does impact cutting in metal. However, I was able to clean up the edges fairly easily with a fine grit sharpening stone, and after that it cut great in mild steel. I've also sharpened it more than once over the couple years I've had it, after lots of metal drilling dulled it. I had to be careful to sharpen each flute the same amount to avoid unbalancing the cutting action, but all that takes is keeping track of where I have and haven't sharpened. The bit has cut well and smoothly after resharpening.

Scritto da: Ryan N.

It goes the distance.

I've been expanding countersunk holes in stainless steel plate for over 250 holes and its still sharp. Definitely worth the money.

Scritto da: James Ginn

Got The Job Done

Not sure if the blade is still sharp after 3 holes but I was drilling in oak. It was certainly good for 3 holes.

Scritto da: Elephants Never Forget

Sharp and tough - the best countersink I've tried

I only got around to trying this for the first time this week and it's surprisingly tough. It's sharper than I expected and after countersinking many holes in wood, plastic and carbon fibre all week, it shows no sings of dulling yet. Given that the other countersinks I used to use would dull within a day and become completely useless within a week, this one has been very worth the extra couple of dollars.

Scritto da: Dan Soussi

Essential

It's been working well to make countersunk holes for my screws in metal, plastic and wood. An essential tool in my kit.

Scritto da: R B Chambers

now that I have used it extensively I recommend it 100 percent

I did not rate this countersink when originally requested because I wanted time for it to prove itself , now that I have used it extensively I recommend it 100 percent . Still works well after multiple uses.