iDesign Classico Scaffale da cucina per pentole e coperchi, 26 cm di lunghezza x 10 cm di larghezza x 46 cm di altezza, cromato

Name: iDesign Classico Scaffale da cucina per pentole e coperchi, 26 cm di lunghezza x 10 cm di larghezza x 46 cm di altezza, cromato
Brand: iDesign
SKU: 0081492485803
Price: 55.51 EUR
Availability: InStock

Brand:iDesign

3.2/5

€
55.51

DESIGN SOTTILE: il ripiano del coperchio misura 10,80 x 3,83 x 16,76, perfetto per essere riposto nell'armadio. COSTRUZIONE DUREVOLE: l'acciaio resistente alla ruggine resiste ad anni di uso quotidiano. La finitura cromata si abbina perfettamente a qualsiasi stile di arredamento. INCLUDE L'HARDWARE DI MONTAGGIO: include il pacchetto hardware per una facile installazione. Hardware destinato all'uso solo su superfici murali. CONTIENE FINO A 5 COPERCHI DI PENTOLE O PADELLE: Il rack organizer conserva i coperchi con una varietà di tipi di maniglie come tondi, pomelli per le orecchie, ecc. Ottimo anche per contenere Tupperware e altri coperchi!. RACK PER L'ORGANIZZAZIONE DEL COPERCHIO: il rack per la conservazione della cucina è perfetto per armadi, dispense, pareti e altri luoghi della casa. Tenere coperchi di plastica, vetro e metallo. Risparmia spazio prezioso sugli scaffali della dispensa riponendo i coperchi di pentole e padelle sul muro.

Quantity

Aggiungi al carrello Compra subito

EAN: 0081492485803

Categories: Casa e cucina, Cucina e sala da pranzo, Archiviazione e organizzazione, Organizzazione di armadietti e cassetti, Supporti per coperchi di pentole,

Assembly required	No
Color	Chrome
Finish Type	Powder Coated
Material	Alloy Steel
Room Type	Kitchen

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Muzzie0917

Returning, my lids were too heavy

If you have lids that aren’t too bad g or heavy, this would help in storing, saving cupboard space

Scritto da: LMSnOh

Holds even the biggest lids!

Disclosure--I returned this item. BUT, not because of the sturdiness, appearance, capacity (10 and 12 inch lids!), or ease of install (couple of screws, a drill, done!). It is exactly what I wanted, did exactly what I wanted it to do... the lids, once installed, lean out from the wall/cabinet door to an extent that severely restricts anything being able to fit inside the front of the cabinet. I dont have a lot of cabinet space, I had a perfect cabinet door for this, but once I saw how low the lowest lid rested, and how much of my interior space I was losing, I knew I needed a smaller rack that would hold the lids closer to the door, and only 3 lids, not four. These are big lids, they fit really securely, it looked high-end on the cabinet door, just not a good fit in my small kitchen! I will definitely keep looking at items this company makes!

Scritto da: Mimi

I have a couple lids that will not fit because the depth is too much (they are not flat like the ones showing in the picture) and I have ...

This picture shows the largest lid at the bottom of this rack but my largest lid will not fit securely there because the lid hits the bottom horizontal bar which doesn't allow room for the lid to settle into the rack.(There is no wiggle room to adjust the angle to avoid hitting the bottom bar if there are lids in the above rack. The angle is too much and doesn't allow enough room for the largest lid to fit securely before it hits the wall and the knob can settle into the rack. I was however able to put my largest lid onto the top rack since there was no bar at the bottom, and no lids above allowing the lid to settle in at a more perpendicular position. The depth of the lid and the size of the knob is also a factor. I have a couple lids that will not fit because the depth is too much (they are not flat like the ones showing in the picture) and I have some lids that have a thicker "knob base" so that the "neck" (between the base and the knob) can't settle into the rack as it should. But I still put them in the rack because I think they are stable enough. A minor inconvenience is that you have to push up or pull back a lid a little bit to return or take a lid so that the knob doesn't get caught on the neighboring lid. I am able to use the rack although not as well as I hoped, and need another rack for the rest of my lids. I will be looking carefully to find a rack that can hold me lids with bigger knobs and lids that have more depth and that can hold lids with a handle vs. a knob.

Scritto da: Jay

Very happy with this purchase.

I debated for some time on whether to get a lid rack, checked quite a few products/reviews, and finally settled on this one. It fits perfectly on the inside of my cabinet door and holds the lids in place quite well. It still leaves plenty of room in the cabinet for the actual pots/pans. The metal wire is very sturdy and I am confident it will have no problem holding its shape indefinitely. While it comes with mounting hardware, you may need to buy your own since the screws that were included are too long for most cabinet doors. Overall, very happy with this purchase!

Scritto da: Amy D.

Easy to install

Works as expected. Only reason I am giving it a 4 is the lids are tight in there and if my lids were much bigger they wouldn't fit. Otherwise it solved my problem!

Scritto da: P. Clark

Handy storage

This is a handy storage item. I have very limited cabinet storage so this works great on my pantry door. It is very well made and easy to hang and use.

Scritto da: Carol Mills

Saves space, makes finding the right lid easy.

I am so happy. I can find the lid I need right away and it frees up so much space in my cabinet. My husband keeps asking-"Why didn't we get this years ago! I mounted it on the inside of my cabinet door and it makes it so easy to find the right size lid for my pans.

Scritto da: Elijah B.

Too long of screws for regular cabinet door

Rack was sent with too long of screws to pit in a standard panel cabinet door. Other than that it worked fine.